Sewing toys with your own hands is veryAn exciting process for both the child and the adult. And this article will tell you how to sew an unusual toy in the form of an airplane made of denim. If your baby has never encountered original hand-made toys, then it's time to introduce them to them. To make a toy like this with your own hand is wrongreally difficult. You will need only a pattern of the aircraft and a fabric for sewing it. From handy tools you need to prepare silvery sequins of different sizes, all kinds of decorative metal parts, silver paint in the form of a spray, etc. Now that everything is ready, you need to get down to work. It should be cut from the denim parts of our future aircraft with allowances of about 0.5 cm. You should get 4 details of large wings, 4 parts of small wings, one piece of top and bottom of the body and 2 side parts of the body. The first thing you need to do is pair all the detailswings of the airplane and cut off the allowances on the curvature of the wings - this is done so that the part does not mow in different directions when it is turned out on the front side. After all the wings have been turned out on the front side, they need to be filled with any available stuffing material. Now proceed to sewing the hull of the aircraft. Sew the upper part of it to one of the sides, and the lower one to the other side of the case. Now it is necessary to connect all the details of the body together, leaving an opening of about 5 - 7 cm in the lower hamper not sewn. Turn out the base, fill it with packing material and sew a hole with a hidden seam, pre-bending the allowances. Sew the wings to the body of the aircraft with a hidden seam to make this operation more easily, initially it is possible to pile all the details with pins and sweep each other. And then act according to your imagination. You can make an imitation of combat damage using a ripper. Zatonirovanie fabric can be using silver paint. Sew on the big wings of the sequins, and on the small ones - metal buttons (in the picture buttons with stars are borrowed from the old overcoat). If desired, you can tie a scarf for our aircraft, its length should be about 30 cm. To make the scarf look beautiful, you need to dial 12 spokes on the spokes and tie the first 4 cm of elastic band 1 to 1, make the middle of the scarf more narrow by removing one loop . The opposite end should be tied in the same way as the first, and the edges should be decorated with fringe. Based on this pattern you can think ofown original model of the airplane, and the fabrics can be used in completely different textures and colors. In work, you can apply any dense material. If you do not have suitable metal buttons, you can take a different old badge instead. It will turn out beautifully and very original.