Building a pattern of cap for newborns andsewing products is not something complicated. The process is quite simple, although it requires some effort. There are several basic options for patterning the product. But, if you think a little, you can simplify it. This option is especially suitable for those mothers who are not experienced seamstresses, but who have a desire to provide the baby with their own headgear sewn. Cheps for a newborn baby is an important and necessary element of his clothes. They fulfill both practical and aesthetic role. Practical is the protective function of the baby's head from hypothermia, the trauma of the fontanel. For today in shops it is possible to buydifferent models of bonnets. But it's much nicer to make them yourself. To begin with, it is required to build a pattern of a cap for newborns. We will choose an uncomplicated pattern for our product. You can see it below. In this case, we need to find three details. Two of them are lateral, and one more detail is the middle part of the product with a fold. We will cut out all the details without the presence of allowances. Given that the size of the head of each child and have the property to change with its growth, the values proposed on this pattern will need to be adjusted during operation. In addition to the three details that we see onpattern, we also need a fourth - a strip of the same fabric as the product itself or a ribbon in order to round out the cut (top) and make the strings. The length of the strip is equal to the length of the top edge of the headgear plus the din of the strings. IMPORTANT. Stitches sewn on the bottom seam can be dangerous for the baby, since they can provoke suffocation. Now pick up the material. It must be soft, pleasant to the touch, to correspond to the temperature regime and the time of the year. Ideally, a chintz or flannel will do. Now let's talk about the tailoring process. For the beginning we prepare the fabric - we stretch and iron it. Then we transfer the pattern to the fabric and cut out all the necessary details of the product. Sections of the cap should be on the outside of the product, otherwise they can cause injury to the delicate skin of the baby's head. Now we need to pritachkat middle part of the cap to the side. We do this one by one. The width of the seam is five millimeters. It is necessary to sweep the seams. To do this, you can use the overlock, sewing machine or make a marking manually. The lower cut we can sweep or make a fringing. To the top section of the headdress of the baby, you must sew a ribbon or strip of fabric prepared in advance. In this way, you will get a fringing and stringing. Take care that they are not too short and wide. You can make a more simple pattern. To do this, you need any clothes baby with a hood. We circle the hood of the product - this will be the main part. Then you can add a visor, ruches and other details that will decorate the bonnet. In the photo below you can see how to make such a pattern. Using the suggested options, you can sew ordinary cap as in the photo or do something original and unique.