Bear and panda from beads: schemes for weaving funny figures
Content
- Bear cubs in the technique of brick weaving
- Tutorials for weaving bears
- Panda with a sprig of bamboo
- Video: Panda from beads in the technique of brick weaving
In this lesson, we will consider the weavingFigurine bears and exotic panda beads. These two funny figures can be done using completely different techniques and schemes of weaving. Both experienced and novice craftsmen will be able to choose the animals they like and make them themselves, having attached the entire family to this occupation.
Bear cubs in the technique of brick weaving
The first master class will consider the weaving of cute bright bears from beads. Figures obtained as a result of this lesson can become original earrings or an attractive pendant.
For weaving this craft, you need to prepare the following materials and tools:
- Beads of suitable colors. This master class uses beige, pink, golden, blue and black shades;
- A needle for beadwork;
- Fishing line;
- Pins (2 pieces);
- Schwenzy;
- Decorative beads (2 pieces).
The work uses a rather simple scheme,Both sides of which are symmetrical, therefore such a weaving can not be better for beginners. The process begins with the creation of the row with the largest width, which is marked on the diagram. In the course of the work, you may additionally need the schemes, on the basis of which the narrowing and expansion of this web is. Therefore, we advise you to study these materials in advance before moving on to create teddy bears with a brick stitch.
In the beginning, it is necessary to fix one of the pins on the line. This is done in the following way: the pin is put on the fishing line through the eyelet, moves to the middle of the segment and is fastened with two nodules.
The initial series is played by one's own hands from faith toBottom, according to the scheme. All the beads are intersected by each of the tips of the line. Having finished creating the first row, leave any of the tips of the line, which is useful for making one more half of the figure and continue to weave the right side of beads from beads.
The first part of the bear is done. At the end of the weaving, tie the knot. The line can not be melted, but hide its end in a woven cloth and remove unnecessary ones. The second (left) part of the bead bead is padded in a similar way.
One of the bears is ready. You can make another figure and you will get original earrings with your favorite colorful animals.
Woven in a brick way two of these bears, you need to put on the pins beautiful beads and fix them on the shvenzy.
Taking this simple scheme as a basis, you canMake many unique products with your own hands. A similar figure of a bear is a perfect keychain for the phone. Having made three different animals from multi-colored beads, attach special rings to them, as well as a chain with pendants and you have a bright beaded bookmark for a book or diary. Experiment with color combinations and come up with your own ideas for original handicrafts.
Tutorials for weaving bears
The following two presented diagrams will help you make bead beads by the technique of parallel weaving of even and bulky shapes.
Panda with a sprig of bamboo
Panda - an exotic bear, loved by manyFor its touching appearance and awkward movements. With the help of beading, you can independently make such a small animal and carry it with you, attaching it to keys or a mobile phone.
To make this panda, prepare:
- Beads under No. 10 dark, light, transparent and green tones;
- Tubules of glass beads of green hue;
- Beads of light and transparent shades with a diameter of eight millimeters;
- A white oval bead that has a biased hole (to create a panda tail);
- Pin;
- Thread, fishing line or monofilament for beading.
Let's start the process by creating a panda head. The work takes place at the two ends of the thread. We type on a string three pieces of light beads and move them to the center. Further, any of the tips must be pushed into the bead at number three (following the pattern of the monastic beadwork). So, we get the first link. According to the scheme, on the thread, which is marked in red, string four dark beads and draw its tip into the bead, which completes the initial of the links (the first eye of the beaded panda). On another thread, marked blue on the diagram, we string two pieces of white beads. In this case, the first thread is carried to the second bead. In this way we closed the next link - the second one. According to this scheme of action, it is necessary to make the following links - the third and fourth.
Weaving of the fifth link begins with passing throughThread through a bead in the original link. Next, you need to string one transparent bead and close the link in it. The sixth detail consists of stringing two pieces of the main material of a transparent shade and one black bead, where the second thread is held. The following elements from the seventh to the fifteenth are created on the basis of the scheme (each of them is numbered). Next, the fifteenth element is combined with the first. At this stage, insert a bead (8 mm) into the middle of the weaving. The seventeenth element serves as the place of creation of the muzzle of the panda. The component part number 25 is made of white beads (according to the scheme, this element is marked with a green tint). From this detail, the body of the figure will subsequently be woven. Having broken a link under number 38, it is necessary to weave another ear for a panda of beads. After that, we renew the weaving and create links under numbers 39 and 40.
We begin to weave the panda body from the link under No. 25,Each component of which is also numbered. Having finished the weaving of the fifteenth detail, we insert in the middle an eight-millimeter bead. Having finished making the body of the panda, among the links 23, 24, 26 and 30, it is necessary to fasten the bead, which will serve as a tail.
At the next stage, the fig pieces are created, which are weaved to the elements under № 27 and 29 (in the diagram these are E-I marks on both sides).
It remains to weave the back pair of legs and a bamboo branch.
At this weaving the panda is completed, you only needInsert a special carnation, which is called pin in the body of the craft, wrap its tip in the form of a loop and attach a string or a connecting ring to conveniently attach a panda figure, for example, to the keys.
Video: Panda from beads in the technique of brick weaving
