Building a pattern of dress-sundress with cutsespecially does not differ from the similar process of other styles of this element of clothing. With it, every seamstress, even a beginner, can easily cope, if you carefully read a detailed description of the work. The main thing is to correctly measure the proportions of the figure and correctly make all the necessary marks. Sarafan is known to any woman from time immemorial. In Russia, he was the everyday clothes of every girl, girl and woman for quite a long time. Of course, today this style of dress is not limited to one model. There are a huge number of them, differing in length, using fabric, thick briteleck or lack thereof, individual parts and so on. As an example, you can see some models in the photo a little lower. Sarafan is especially relevant in the summer, but,Nevertheless, some models are ideal for wearing them at any other time, even in the winter. It all depends on the model and the fabric with which it is sewn. It is not difficult to sew this dress with your own hands. It is enough just to decide on a model that is ideal for your figure and correctly cut it using your exact measurements. Today we will consider how to make a pattern of dress-sarafan with undercut. The construction of a pattern of a dress-sarafan with cuts, by and large, is not somehow too labor-consuming process and does not differ much from the patterns of products of the same style. The main thing is to correctly measure and accurately transfer them to paper. For this we need a large sheet. Note immediately that the length of the product you have the right to choose any. Therefore, there are no restrictions. It is important to remember, initially we make a pattern basis and only then transfer to it all the details. By the way, the pattern base is the foundation for any dress style. We pass to a pattern of a sundress with undercuttings. On the pattern of the backrest and transfer of the backboneapply lines of this style. Back (see Figure 4a). Starting from the neck, its lower point, to the middle of the back we take 10 centimeters. From the top of the neck to the right on the shoulder we take 4 centimeters. Down from point 4 take 8 centimeters. Now we need to connect two points, 8 and 10. The shaded moments (as in the photo) need to be cut off. Before (see figure 4b). In the middle of the pattern, transferring downwards from the neckline, the bottom point, we take 13 centimeters. From the top of the neck to the left shoulder we take 2 centimeters and from the point two put down 15 centimeters. Down (the groove line) we take 17 centimeters. All the points, 13, 15 and 17, we connect with each other. Again, the dashed patches (with the exception of the end of the groove on the chest) need to be cut. Now we make the necessary cut from the mark 17 and to the end of the groove. Important. At the time of sewing, the tuck lines are superimposed one on one to get the protrusion according to the shape along the line of the product gate. Building a pattern of dress-sarafan with cuts is ready. Now transfer it to the selected material (see Figure 4c, 4d). It is necessary to decompose the image onto the folded along the material. The middle part of the transmission and the backrest should be exactly on the bend of our material. It is imperative during the cut to make the necessary allowances for future seams. On the sides - three centimeters, the bottom of the sarafan - five to six centimeters, for the neck - one centimeter, shoulders - 2 centimeters, for the armhole - one and a half centimeters. It remains to sew details and the outfit is ready.