How to carve and sew a coat with a whole-cutWe will try to tell you the sleeve in this article. This information will be of interest to all girls and women who prefer to tailor and sew themselves all clothing, including the top. The models of a coat made in this way are fairly simple to manufacture, as you can easily see for yourself. Coats, regardless of what kind of model it is, summer, autumn or winter, is quite popular in the wardrobe of not only girls, but also of the stronger sex, as well as children of all age categories. Among the many models and styles of this product are very interesting and, moreover, uncomplicated are models of a coat with a one-piece sleeve. The popularity of such products, this applies not only to coats, but also to dresses or blouses that have a one-piece sleeve, is fully understandable. It is not just beautiful, but also convenient. The sleeve is a spacious, non-binding movement. All because its cut is easy. In this case, the sleeve is not cut out on the arm. This option often allows you to hide some of the drawbacks of the structure of the hand, and the model of the coat allows you to adjust, visually improve the figure. The main feature of cutting a coat of this style -this is a joint cut-out of the sleeve with shelves and the back of the product. The lobe is either completely or partially absent. The shoulder does not have a clear line, so it makes the product more feminine, due to the smoothness of the shoulder portion. For the stitching of the sleeve, twolines. The upper one is connecting. It continues the shoulder seam. The second line, the lower one, smoothly passes into the lateral seam. To make the thing as comfortable as possible, do not hold it down while moving, it was comfortable, you need to attach two gussets, the shape of which can be arbitrary, based on your desire and the model you chose. The initial, primary task is to handle the details of the gear and the backrest. All of them should be well evaporated. In order to avoid problems with the transfer of the pattern on the fabric and with the subsequent sewing of the product, it is necessary to prepare the material from which you will be directly sewing the coat. Remember that after the hems are sewn, it is absolutely necessary to heat the front part of the product. This is done as follows:
- the transverse folding in the chest region is carefully pressured;
- the lower edges of the sleeve need to be slightly pulled up, then the sleeve will fit well.
For carrying out the above described actions, halvesThe front part needs to be placed face-to-face. It is necessary to make sure that all sections available are ideally matched. As for the sleeves, they should be stretched in the direction upwards as much as possible. This manipulation should be started from the shoulder, but up to the elbow line it is not necessary to reach somewhere six centimeters. We will get a weaker cloth. It must be ironed in the place where the sleeve is usually sewn into the armhole. Be sure to consider both the size of the sleeve and its shape. The processing of the rear part of the sleeve is carried out in the same way as described above for treating the front part. After this, along the armhole line, where the sleeve is sewn, from the two halves, the back and front, it is necessary to make an edge, to stitch it with an imperceptible seam. If you are going to sew just such a coat with a whole-sleeve sleeve, do not forget that the seams should be treated at the lower end of the sleeve and on the side together. Side sections and edges with the landing part in the area of the elbow are sewn. All seams should be carefully ironed. After the work done, it should be combined with the finished gusset thing. They can be rhomboid or square. The lines need to be ironed well. Thus, we ensure the correct alignment of the cuts, their corners. After this, it is necessary to stitch with the halves of the gear and the backrest. When the coat is completely sewn, it must be carefully ironed. Then it will take a proper appearance. Below you will find patterns that will help you in doing the work, will make it simpler. If you are patient, you will be able to sew such an interesting piece yourself, especially since now you know how to carve and sew a coat with a one-piece sleeve.