Knitting pattern knitting needles for a newborn from a cap, blanket, shoes and mittens

December 20, 2017 handmadebase

Try to tie for your crumbs wonderfulgift: a set of hats, blankets, shoes and mittens. Our detailed diagram with photo and description will help even beginner needlewomen to easily cope with the task. Sizes: 62-74. Blanket: 65x65 cm. Materials: we need about 400 g of turquoise-blue melange (50% polyacrylate, 50% cotton, density 70 m / 50 g) and about 100 g of yarn of turquoise color (100% merino wool, density 95 m / 25 for a newborn baby) d), for the blanket we will also need turquoise yarn 350g, and for shoes, hats and mittens only 100 g of the same yarn; In addition, we will need to use knitting needles # 2,5, # 2, # 4,5, # 5,5, as well as sets of five spokes # 2,5, # 3,5, # 4,5, and hook # 4, 5; one button aquamarine shade. Elastic: we knit alternately standard one face - one purl loops. Facial smoothness: in the front row - facial loops, and, respectively, in the purl - purl loops. Grooming: we sew the front and the back rows with the front loops. Semipatent pattern: we make an odd number of loops. The first row: edge, remove one loop with a cape like a purl, * one facial, remove one loop with a cape as is., And then repeat from the beginning of the first facial, ending with the edge loop. The second row: edge, we sew a loop with a cuff together with an obverse loop, then repeat the first out., We sew a loop with the next overtone together already of the faces., Repeat from *, we finish with the edge loop. The third row: all the hinges are facial. Fourth row: purl loops. We repeat from the first to the fourth rows. Pattern from the braid: the number of loops should be a multiple of 9 + 6. The first row: edge, one obverse, two purlins, seven facial, two purl, then repeat from *, end with one face loop and edge. The second row - Eighth row: knit loops according to the drawing. Ninth row: edge, one obverse, two purlins, * 7 hinges cross to the left (this is done by leaving three loops on the auxiliary spokes before starting work, four facial ones and tying the loops from the auxiliary knitting needles), then 2 purl, repeat from *, finish 1 front, chrome. 10 row: we knit the loops according to the drawing. Next, repeat from the first to the 10th series cyclically. Knitting density Melange yarn, semi-patented pattern, knitting needles No. 5.5. We knit 30 rows of 15 loops each = 10 x 10 cm; Pattern with braids, thread of turquoise hue in two pieces, knitting needles No. 4. We knit 27 loops for 32 rows = 10 x 10 cm; Pattern with braids, thread of turquoise color in one addition; spokes number 2.5. We make 35 loops for 44 rows = 10 x 10 cm. Knitted envelope for the discharge of the newborn. Knit the back: we sew knitting needles 5.5 and 59 with loops and knit a semipatent pattern. 45 cm from our typing edge, we close on both sides for the armhole, five loops = 49 loops. Then at the height of the armhole about 15 cm we close all the loops. The outer 16 loops on each side form hangers, and the middle 16 loops form the neck. Left shelf: we collect on knitting needles No. 5,5 39 loops of melange yarn and knit with the same semi-patented pattern. Perform on the right side armhole, similar to the back and at the same height = 34 loops. At the height of the armhole, about 10 cm, we close the neck opening on the left side in each second row 1 x 9, 1 x 3, 1 x 2 and 3 x 1 loops. The remaining 16 stitches of the shoulder are closed in the same way as the backrest at the same height. Right shelf: knit symmetrically. Sleeves: we collect on knitting needles 4,5, 23 loops of a melange thread and we connect 4 cm with an elastic band, adding 10 crossed loops from the cross thread = 33 п in regular intervals. Then we pass on knitting needles № 5,5 and we knit a semi-patented pattern. Further for the bevels of the sleeve we add from the rubber band on both sides in each sixth row of 5x1 and in each fourth row 2 x 1 loops = 47p. Then, after 17cm from the rubber band, close all the loops. Hood: we collect on knitting needles 5,5 55 loops of melange yarn and knit with the same semi-patented pattern. Then, two rows from the set edge are closed on both sides for a forward rounding in each second row of 1 x 4, 1 x 2, 1 x 1 loops and in the next fourth row 1 x 1 n = 39 loops. After 16 cm from the main typing edge, we unfasten one facial and one face from the middle loop. crossover, divide the work into two parts and finish both ends separately (20 loops for each side). To round off our hood, close 1 x 1 n in the next 4 rows, and in the next 2 rows 2 x 1, 1 x 2, 1 x 3, 1 x 4 loops and then close the remaining 8 loops in one step. Bottom: we collect on knitting needles 4,5 in two additions 24 loops with a turquoise thread and we sew a pattern from braids. After 32 cm from our typing edge, close all the loops according to the drawing. Plank shelf: we collect on knitting needles number 4,5 in two pieces 14 loops of a turquoise thread and we sew a pattern from braids. Then, after 55 cm from our set edge, we close all the loops according to the drawing. Hood strap: we knit similarly, but close all knitted loops 50 cm from the set edge. Assembling: straighten the details of the envelope in accordance with the presented pattern, lightly moisturize and let dry. We make the seams, while leaving 3 cm at the seams of the sleeves open. We perform the back seam for the hood. Crochet the edge of the left shelf with a melange thread with two rows of st. 6 / n, in the second row, we perform one hinge loop for 1 cm from the beginning of the neck cut (we connect 3 air loops over 2 st. 6 / n). Next, sew the bar in the right shelf, grabbing next to the edge by 0.5 faces. loop. (0.5 persons, etc., remain visible). We sew the hood strap around the front part in the same way. Slightly pripostazhivaya, sewing the hood to the neckline of our neck. We crochet the outer edge of the right shelf, as well as the hood bar, all together in two pieces of turquoise thread 1 p. Art. b / n and 1 row of the "steppe step" (st b / n from left to right), while in the row where st. b / n perform in the corner of 3 tbsp. 6 / n. We put the shelves one on the other by 11 cm and sew the bottom to the bottom edges of the shelves and back, while also taking from the edge of 0.5 persons. loops. Sew the set edge of the bar of our shelf to the wrong side of the bottom. We carry out in 2 additions 10 laces of a turquoise thread of 8 cm. Then evenly sew a button for fastening to the wrong side of our right-hand shelf. We sew up our sleeves.

Bedspread for the newborn with knitting needles

Description of work: we take on knitting needles No. 4, 5 turquoise yarn in two additions of 168 loops and we sew a pattern from braids. After 62 cm from the tying edge, close all the loops according to the drawing. We crochet all the blanket with a turquoise thread in two pieces in 3 circular rows of Art. 6 / n, picking up the front loop in one circular row before and after the edge loop, and in all three circular rows we perform three sts in each corner. b / n. Then we tie all the blankets with one more circular row of the "steppe's step".

Boots with knitting needles

Description of work: we begin with the top part, we type on knitting needles 4,5 in two additions with a turquoise thread of 32 loops and we sew with garter stitch. After 10 rows from the set edge, we close on each side ten loops and we sew the front part on the middle 12 loops. After 16 rows, close these 12 loops. For the sidewall, we collect on knitting needles 4,5 turquoise thread in two pieces of 15 loops and we sew a pattern from braids. After 69 rows from the set edge, we open the edge and join the knitting loop of the last row with the knitting loop of the tying set. Then we type for the sole on the spokes No. 4. 5 with a turquoise thread in two pieces of 12 loops and knit with garter stitch. After 38 rows from the set edge, we close all the loops. Assembly: we sew together the first 10 rows of the upper part. Sew the side part to the top and to the sole, while capturing 0.5 persons. Loops on both sides of the edge loop. We make in two additions a string of a turquoise thread 38 cm long, drawing it through the 10th row of the upper chatsi and tie it in front to the bow.

Mittens

Description of work: we type on knitting needles 3,5 a turquoise thread from a set in two additions of 32 loops, razppedelya them evenly on a circle on four spokes and tying 4 sm elastic. Then we pass on knitting needles No. 4,5 and we tie it as follows: * one purl, we add one purl grasp. From the transverse thread, 7 facial, repeat from * three times = 36 loops. Then we sew a loop in each circular row of the pattern, in the ninth circular row, and then in each subsequent tenth - cross in the front loops 7 loops to the left (1 braid). Through 26 circular rows from the rubber bands we sew each third and fourth loops together. In the next second circular row, we sew each second and third loops together and in the next circular row we sew 2 loops together. The remaining nine loops are tightened with a working thread and sewed.

Cap

Description of work: we type on knitting needles 2,5 in one addition of 112 stitches with a turquoise thread, then evenly distribute them in a circle on four spokes and knit for a curling plank with the facial smoothness (in all the circular rows knit all the loops with the facial ones). After 4 cm from the set edge, we continue to knit in this way: * one purl, we add one from the transverse thread. cross, 7 facial, then repeat from * 13 times = 126 loops. After that, we sew a loop in each circular row according to the drawing. In this case, in the ninth circular row and then in all subsequent tenth rows, we cross in the front loops seven loops to the left (one braid). After 12 cm at the end of the twisting strap, we sew two purlins together together. and the middle two faces of each braid are tied together by persons. = 98 loops. Therefore, we cross in the next spit only six loops to the left (we leave three loops on the auxiliary spokes before work, three facial ones and we loop the loops from the auxiliary knitting needle with the facial loops). Through two circular rows of loops knit on the pattern. Then we sew each wrong loop with the next face loop together with the face loops (= 84 loops) and after all this we knit all the loops with the front ones, tying in each subsequent third circular row every third and fourth loops, in the next third circular row every second and third loops, and also in the next second circular series, two hinges together face. The remaining 21 loops are tightened with a working thread and sewed. Headphones with strings (two pieces): we collect on knitting needles No. 2,5 turquoise yarn in one addition seven loops and knit an elastic band, starting with one purl. Then, 30 cm from the tying edge, we will remove from the transverse thread after and to the edge one crossed loop. These additions are repeated in every fourth row nine times including all added loops, as well as an elastic band. Field only 4 cm from the last place of adding we close all the loops according to the drawing. Assembling: sew the closed edge of the headphones from the underside of the cap to the last circular row of the twist bar.

Comments

comments

Bedspread for the newborn with knitting needles

Boots with knitting needles

Mittens

Cap

Comments

Related posts: