Create a pattern of Russian folk sarafan with your own hands for women, using the description and photo.

February 15, 2018 handmadebase

Sarafan as a national Russian clothing and todayis present in our wardrobe, only in a slightly modified and refined form. Similar sundresses can be found both in winter and in summer. Simplicity of cutting and the use of different in type and shade of fabric made modern sundresses quite common type of clothes, suitable for office style and for beaches. In this article, we will tell you in detail about several ways how to create with their own hands the ancestor of modern sarafans - the traditional Russian sarafan. In order to make a sarafan with your own hands,you need: two and a half meters of dense cotton or satin fabric, the width of which is 1, 1 meter; Two hundred centimeters of tissue with a small pattern (the width of the flap is ninety centimeters); beautiful lace or original ribbon (ten meters); paper for the primary pattern; meter for measurements. Description of work 1. It is necessary to determine the width of the chest and back with tape. Then move your measurements to a piece of paper. Then from the multi-colored tissue flap you need to cut out two elements "A", "B" and "C". As a result, we get the coquette and the straps of our product. In order to make the finish of the Russian sarafan, you need to cut out the pieces of cloth that remained from the main parts, ribbons, the width of which is seven centimeters. 2. From a monotonous fabric it is necessary to make a pattern of 2 trapezoids. We determine their height, taking into account the desired length of the product. On the bottom edge, the length is one meter ten centimeters, and at the top create different bases of trapezoids. The flap located behind should be five centimeters wider than the detail of the back, and the front flap should be wider by eight centimeters. 3. It is necessary to sew the side parts of the coquette, and with the help of a braid to process the upper part. 4. In the middle of the front flap you need to sew a finishing ribbon. Attach it together with the braid, which should be sewn along the seam itself. 5. We connect the seams of the sides of the front and back flaps. The edge is finished with a colored ribbon with braid, which was laid parallel to the seam. Then iron the hem. Applying large stitches, we will stretch the top of the flaps. Next, you need to gather in the so-called "kuliska" the bottom of the coquette in width. 6. After that, we need to sew the coquette and the bottom of the product. Next, iron and process from the wrong side each seam. Ljamochki it is necessary to fold in half, to process their seams, laying a braid on edges. The straps are also processed with an iron, determine their location and length, while wearing the product itself. We join them with sutures to the coquette. As a result, your sundress is ready! And here's another way to create a Russian sarafan with your own hands. It is worth recalling that each region of Russia had its own traditions in creating sundresses. The products could differ in the features of the fabric, color, patterns, and other details. There were also differences between the festive and everyday models of sarafans. Here is another instruction for making Russiansarafan. 1. You need the following elements of the pattern: 4 pieces of strapless 2-nd length from the place above the chest to the shoulder point (the width of the element is five centimeters); Backrest detail (length from the center of the scapula to heels, width - half of the girth above the chest); element of the front part of the product in the form of a trapezoid; on the upper part the width is half the girth above the chest. Please note that each part must have allowances for seams. 2. The part of the strapless should be folded in pairs, facing the inside, then you need to stitch both pairs on the three sides and turn them out. And then process the seam along the edge of the fourth side. 3. If in your plans - to decorate the product with embroidery on the part of the chest or back, you need to make an overlay of fabric with embroidery on the edge of the details of the sarafan. Next, you should bend the edges along the sides on the two main flaps of the fabric, process them with a machine seam (on the left, the embroidery does not need to be stitched). Elements must be connected to each other on the right side entirely, and on the left - in the upper part take care of the place for the lightning. 4. Then we make the hem of the edges at the top and bottom of the main cloth flaps, treat them with a machine seam. If embroidery is provided, then you should leave some distance (symmetrical), where you can hide the edges of the strapless. 5. The straps should be attached using a "zigzag" seam or the so-called "over the edge". If embroidery is provided, then the edges of the strapless should be placed between the embroidery and the main part of the tissue flap. Lightning stitch along the left side seam between the embroidery and the main part of the tissue flap. 6. The product can be decorated with beads, ribbons, beautiful braid or buttons. This model sarafan has a fairly wide step. Therefore, you will be comfortable in it.

Comments

comments

Comments

Related posts: