Create wonderful and useful crafts from plastic bottles with your own hands

Create wonderful and useful crafts from plastic bottles with your own hands

Surely, each of us at home has emptyplastic bottles from under the water. Do not rush to throw them away - because they can make many interesting and sometimes useful things. Plastic bottles are one of the universal and practical materials for creating handbags. Let's start creating a children's toy - catamaran for Barbie. Take two plastic bottles and connect them with electrical tape . Cut in the side of each bottle an opening of such a width that you can seat the doll. All - the catamaran is ready. How to make crafts from plastic bottles ?. Photo №1 Children's fountainIn hot weather there is no better occupationfor children than playing with water. To take the child for a while, you can give him a fountain made of plastic bottles with his own hand. Take the bottle and make holes in it with a knife. It is best to make these holes at the very bottom of the bottle, so you can use all the liquid. Cover the holes and pour water in the bottle to the top, tightly screwing the lid. The liquid with a fully twisted lid will not flow. If you slightly open the lid, the water will instantly suck from the holes made. This is due to the air displacing the water, which comes from the neck of the bottle. Crafts in the technology of papier-mache In the technique of papier-mache,with the use of plastic bottles you can create wonderful toys, for example, for a boy - an airplane, for a girl - a cheerful little animal. To create such toys, take bottles, cut out the details of the future toy. Then fasten the parts with adhesive tape. If you need additional parts, make them out of cardboard, and then attach them with adhesive tape to the main figure. Next, pick or cut small pieces of paper. Then it is necessary to dilute the PVA glue with water 1 to 1. Dipping each piece of paper into the resulting solution, glue them on the figure. Such layers on the craft must be from 4 to 6. After the glue dries, we proceed to coloring, and then to decorating the toy. Vase for flowers To create a vase you will need: empty bottle, iron and material for decor (beads, rhinestones, sequins, etc.) Take the bottle, separate the neck, round the sharp edge with an iron. Garnishing an artifact with the prepared material, you will get a beautiful vase. To round the edges of the vase, take it, put the paper on the sharp edge and iron it. The sheet is in this case necessary to prevent the plastic from sticking to the iron. An iron must be applied several times for a short time, each time checking what is going on under the paper. Box of bottles with our own handsWe take twoPlastic bottles and cut off the bottoms. Then fasten to the bottom of the zipper with glue, or sewn with conventional threads. Next, you can decorate the ready box at your discretion. Another option is to create a box from a plastic bottle. Daily jewelry from plastic bottles It's hard to believe, but from a plastic bottle you can easily make an original and fashionable decoration for every day. To make a bracelet, take a bottle, cut out of it a plastic ring of the required thickness. By encircling the ring with colored yarn or cloth, pasting with rhinestones, beads or lace, you will receive an original decoration.Supply for decorations with your own hands. You can create a stand for decorations by using bottoms of plastic bottles, a metal threaded rod, several nuts and washers. Take the plastic bottles and cut the bottoms (the number of bottles depends on how many levels you want to get in the end). Next, sharpen the sharp edges of the bottom of the iron. In each bottom, make holes equal to the diameter of the metal rod. Toss one end of the rod with the nut and washer. Put the first bottom on the rod with the cut side down. This will be a stand for the future stand. Then screw the next nut with the washer on thelevel, which will be the first layer, then put the bottom on the bottom of the already trimmed side upwards. Next, using the same pattern, you put on all the remaining nuts with washers and bottoms. The attachment for jewelry is ready.

Comments

comments