Women's shirt should be present in the wardrobe of any fashionista. Such a thing perfectly combines with any outfit, and most importantly it can happen with a shortened or with an extended sleeve. It can be done in a business style, orthe option of such a blouse for the summer of silk or cotton will be appropriate to decorate with a small bow. If desired, it is possible to apply a liked ornament or applique. To make such a shirt at home is simple, the main thing is to rely on your desires and follow the instructions. Shirt Pattern The sleeve pattern can be anything, for example: Or this (for a short sleeve shirt): Collar make a pattern For tailoring you will need: - Pattern; - Cut from the fabric (silk, cotton, linen); - a little nonwoven; - a set of needles; - The machine. Let's get to work! To begin with, measurements are taken of the semicircumference of the neck,then the breasts, then determine the desired length of the sleeve. According to the pattern, a kind of shelf, back and sleeves are obtained. Fabric folds in half on the share. Then the details are decomposed into two symmetrical ones with sleeves and a shelf. For a blouse with a wide cut, you need to make a back piece folded into two layers. To cut out on the share both cuffs of the rectangular form in length to 30 see, then to borrow (occupy) with two more details without forgetting about the admission for seams. The upper parts are fixed with a non-woven fleece, the paired details are folded and leveled. The collar is folded with the side of the collar, shifting the upper part slightly lower, approximately 2 millimeters, with a pin, then you have to sweep away all the prepared parts. The collar is turned and thoroughly ironed. Racks to lay down, knock off the mace in the middle and be at the seams. Sew a collar to the counter, smooth out all the seams, turn out the future shirt on the front side and gently detach the collar and the stand. With cuffs to do likewise. Stroke them, retreating by 0.5 cm. Bend the edge of the shelf, which is intended for fasteners. Shoulder tucks well sweep and stitch. Lay the shelf and back from the front. Together to sew the lateral, then the front seam. Combine the seams at the sleeves with side seams and stitch both sleeves. Next, cut the middle of the cutout of the back with the center of the rack. The collar with sleeves should be laid with the front side, swept off and then pritach to the cutouts stand on the outside. Cut the bottom from the outside slightly to bend, then to sweep it. At the end of the rack attachment, sweep the outer and inner sides of the cuffs towards the product. The seams are handled manually, or with the help of an overlock. Make a loop in the shelf and sew on the buttons. Our women's shirt is ready! Wear it with pleasure!