We make an original stepladder chair for the kitchen with our own hands. Step-by-step instruction on creating a useful craft with photo

We make an original stepladder chair for the kitchen with our own hands. Step-by-step instruction on creating a useful craft with photo

Very often in the kitchen you need to get something: remove flowers from the upper shelves, change the curtains for washing, get a couple of cans from the mezzanine above the entrance. And what do we usually do in such situations? We take out the chairs, try to reach out on the toes, standing on uncomfortable stools for this not intended, or even put the chairs on each other and put ourselves in extreme danger while being on such a shaky construction. How to avoid such dangerous for health and undesirable situations. It is very simple to use specially designed for such purposes stool stepladder. Of course, you can right now run to the store and purchase a useful accessory in the household. But why spend extra money and money, when you can make a stepladder chair with ease with your own hands. The material for making such an entertaining craft is usually chosen wood. He has a number of certain advantages over plastic and metal:

  • The tree is very easy to process
  • Natural wood color looks very natural and beautiful
  • The weight of the resulting wooden ladder will be advantageous to differ from other competitors and it will be convenient to transport
  • A tree is an environmentally friendly material, which is very important because we will use our artwork mainly in the kitchen
  • Boards and beams from which the chair will be made stepladder can be bought very cheaply in any store.

It is these advantages that contribute to the choice of wood as a material for future crafts. Now go directly to the manufacture of our chair-ladder. It will consist of the following parts:

  • Seat;
  • Stand support;
  • Stairs
  • Well and reiki by which we will connect the whole structure.
  • photoinstruction on the creation of a ladder-chair by one's own hands. Photo №1 For reliability and strength of the structure, it is recommended to use the following parameters:

    • Between the strings of the ladder, the distance should be 48 cm.
    • The distance between the support column and the string (maximum) is 60 cm.
    • Seat height - 60 cm.
    • Approximate seat parameters are 30 by 50 cm.
    • For convenient functionality of the ladder to you2-3 steps are needed. They should be located from each other at a distance of 16-20 cm. From the bottom step to the floor and from the seat to the top, the distance should be the same.

    We make the seat. To create a seat, you need 2 basic rails and 5 cross rails. First, treat the surface to the ideal smoothness of the tree. Then fasten the slats to each other. Mark the straight lines at a distance of 5 cm from the edges on both sides. Using a milling cutter, make a groove, the width of the groove should be slightly less than the base rail. In order for the construction to be more reliable, glue the joints. In the photo below you can see the finished version of the seat. photoinstruction on the creation of a ladder-chair by one's own hands. Photo # 2 If there are no racks under your hands, an excellent seat canGet out of a pair of boards with parameters of 500 by 150mm. They simply need to be attached to each other. Next we manufacture the support part. For this you need 5 racks. Two of them will provide a horizontal connection, the two will be guiding and the latter will serve for the strength of the structure. It is necessary to connect the guide rails under the slope. photoinstruction on the creation of a ladder-chair by one's own hands. Picture №3 Connections are all done with dowels. Drill holes at the ends of the rods. Their diameter should be slightly smaller than the diameter of the dowel. In the rack-racks, you also need to make holes. For the reliability of all the connections of our stairs-ladders also need to be glued. In the end, you should get the back of our stool-stairs. photoinstruction on the creation of a ladder-chair by one's own hands. Photo №4 When you are installing the rack, do not forget,between the guide rails should be such a distance that it was possible to fix the seat support rails. The next step is to make a ladder. Before starting the creation, it is necessary to pay attention to the fact that the flight of stairs should be fixed at an angle. At the same time, all steps are strictly horizontal, therefore grooves for them must be made at an angle. In order to identify the angle, first assemble the entire structure without connecting laths and steps on a flat surface. Set the distance between the support arrow and the string of 60 cm and adjust the angle of the construction to achieve a strictly horizontal arrangement of the steps. If necessary, reduce the length of the pillars and string until the height of the seat is 60 cm. When finished, connect the structure with the connection rails and cut off the ends of the pillars and bowstring at the desired angle. Next, note the location of the steps and make grooves using a router. When you fit two strings to each other, you should clearly see the symmetry of the slots for the steps, as in the photo below. photoinstruction on the creation of a ladder-chair by one's own hands. Photo №5 The width of the steps should be 44 cm. and a depth of about 15 cm. All the grooves in which you will fasten the steps should have a slightly smaller width in comparison with the thickness of the steps. All connections also, as in previous cases, treated with glue and strengthened with screws. photoinstruction on the creation of a ladder-chair by one's own hands. Photo №6 Next, mount our chair stepladder. The final connection of all the parts with each other will be performed in this order.

  • To the seat we mount the guide of the support post and the strings of the stairs. To ensure that the upper ends of the rails do not cling to the seat when you fold the structure, just round them.
  • Between the upper stage and the seat, fix the slats to connect the support post and the ladder with one end, and the second ends - secure in the middle of the support posts.
  • photoinstruction on the creation of a ladder-chair by one's own hands. Photo №7 When you mount the entire structure of ourchair-ladders, cover it with varnish for durability and convenience. In total it is necessary to impose 3 layers. Seats and steps need to be covered with a little more layers. This is necessary for greater durability of the product. In order for our stool-staircase to serve us for many years, it is necessary to update the coating with varnish during use. When you do not use hand-made articles, it is best to hide it in a warm and dry place. Also, try not to leave a stepladder chair made on your own in the street in wet and cold weather, this has a bad effect on the quality of the wood. Now our chair-stepladder for the kitchen with your own hands is ready and you know all the secrets for its operation. photoinstruction on the creation of a ladder-chair by one's own hands. Photo №8 Thus, very quickly from ordinary woodwith the help of tools available in the household of every man, you were able to make a beautiful stepladder chair for the kitchen with your own hands. This article not only fits perfectly into the interior of the kitchen, but it will be very useful in the household and in a couple of weeks you will not imagine how to manage without it. In addition, all this will cost you completely for free, as it was done by yourself. So do not expect to make a beautiful stepladder chair for the kitchen with your own hands, share the experience with other users in the comments and let your household be as cozy and enjoyable as possible.

    Comments

    comments