Embroidered tablecloths patterns scheme

Embroidered tablecloths patterns scheme

Content


Once upon a time, tablecloth embroidery was shortchangeda common activity for many women. Almost every girl had to prepare a dowry for herself, which included a tablecloth embroidered with her own hands. Today, cross-embroidered napkins, tablecloths and towels have become a wonderful decoration for the home interior. What adds value to them is that all this was made independently. But a cross-embroidered tablecloth is not just a beautiful thing and accessory for the festive table, but also an indicator of a family’s wealth, which reflects its customs and traditions. All this is encrypted in patterns embroidered on the fabric. Let's look at how to embroider tablecloths with a cross, and what patterns are suitable for this.






Materials and tools

One of the best materials for a tableclothlinen. Very often needlewoman buy ready-made linen tablecloths and then embroider them or embroidery patterns cross. Of course, this requires certain skills and a suitable circuit, which is very much on the Internet.
To embroider a tablecloth you will need the following materials and tools:

  • Linen tablecloth;
  • Threads floss the right shades;
  • Needles for sewing and scissors;
  • hoop;
  • Scheme;
  • Threads for sewing.
  • How to embroider linen tablecloth

    Linen fabric is the ideal material forcross stitch napkins, towels, bedspreads, tablecloths and bed linen. Linen tablecloths embroider not difficult, and even more easily than the tablecloth of other materials. In practice, it is almost the same as that embroider on canvas. As is rovnotkannym linen cloth, the number of filaments in the joint and in the transverse direction had the same. Therefore, they are very easy to find, and embroider them. Many embroiderers believe that it is not easy to work with and avoid flax. But the work will be simplified, if you follow a few rules:


  • Linen fabric must be well stretched for work;
  • Choose a needle for sewing the right size, fit №№26-28;
  • Embroider only in good light in the room, it is good to see the weave linen;
  • Not half-cross embroider on linen. Where the scheme involves half-cross, use
    ;
  • Linen fabrics have defects, so the cross stitch, you need to capture the warp yarns, both in length and width;
  • Do not mark on the pencil flax, better use for this thread other than the basics of color;
  • Pay special attention to the flatness of placing crosses;
  • Do not twist the needle thread in the derivation of the web;
  • Linen should be stretched beforeembroidery and immediately proglazhena iron. If you wait for it to completely dry, the bumps will then be very difficult to smooth the fabric and will not be perfectly smooth.
  • Choosing a pattern for embroidery tablecloth

    Really beautiful tablecloth only succeed,if you choose the right scheme pattern for her. This can be a ready ornament for embroidery, and any picture that can be expanded on a linen canvas. For example, it can be a beautiful flower, a bird, or a bunch of grapes, you will embroider around the perimeter of the tablecloth. Of course, this work is difficult to perform, as it is necessary to calculate the number of pieces and place them equidistant from each other. Therefore, we recommend beginners to choose simple embroidery pattern of two or three shades of floss.
    When choosing patterns for an ornament, you need to accurately calculate so that it fits on the tablecloth a certain number of times and is not cut off.




    If we talk about popular embroidery patterns, floral ones have always occupied a leading position. Beautiful violets, tulips or roses will look great on the tablecloth.
    You can use the diagrams presented onwebsite, or purchase special sets. They usually include tablecloths, floss threads and embroidery patterns. Ready-made kits are good because they have already calculated the number of threads for you and correctly selected their colors.

    embroidered tablecloth

    To start, you need to determine the pattern forEmbroidery and its location on the canvas. For embroidery tablecloths cross repeating pattern generally selected and place it along the edge of the fabric around the perimeter. Sometimes in the middle of the web is also present some bigger picture.

    It is necessary that from the ornament to the edge of the product there isthe same distance everywhere. To do this, you need to make markings before embroidering. You need to embroider, stepping back from the edge, since the fabric there may crumble over time and the pattern will deteriorate. The distance to the edge should be at least 5 cm.
    Don't forget about the corners.The pattern should fit organically into the corners, clearly drawing them. The ornament made in the corners of the tablecloth will give the finished product more symmetry and completeness. This tablecloth will look very neat.
    Before starting work, mark the fabric,having verified and measured all distances. Marking should not be done with a pencil. Use threads of a contrasting color or a special disappearing marker, which is sold in craft stores. It will be easy to embroider a symmetrical pattern by marking out 10x10 squares.
    Having prepared the threads and marked them with symbols fromkey of the pattern, start embroidering. Start embroidering by stepping back the required distance of 5 cm from the edge of the embroidery. Using the diagrams, place the design along the edge of the fabric, making sure it is symmetrical. Once you have finished embroidering the outline design, you can begin to work on the central image, if there is one. Accurately calculate the center of the fabric by first marking it with a marker or stitching along the contour with threads.

    Final treatment and care

    If you've used is not ready for embroiderysewed a tablecloth, and the workpiece, then you need to take care of the edges. Deal with them in order to avoid fraying. To do this, they need to tuck a couple of times and the stitch on the sewing machine. If there are no cars, you can do it manually. Just walk around the perimeter of the fabric obmetochnym seam. To hide the seam, you can sew the edge of the lace tablecloth, which further decorate the finished product.

    Your tablecloth is ready, but in order for it to please you with its bright colors and look like new for as long as possible, you need to properly care for it.

    Cross tablecloth should be separate from other items. Lather soap and water is best, which is not alkali. In no case do not rub the product and do not remove it, so as not to damage the pattern.
    If the tablecloth is very dirty, then it can beboil. You can even boil linen tablecloths, but only those that were embroidered with white threads; colored ones can fade. If the fabric has a colored pattern, it cannot be washed in hot water. Use lukewarm water with soap and salt.
    Stains on a white tablecloth can be removed by dampeningsoak a cotton swab in bleach and lightly rub the fabric with it. But you need to be careful not to get bleach on the embroidery. Then the tablecloth is rinsed a couple of times in cool water and starched.
    The washed product is slightly wrung out by hand,hang out to drain excess water and wrap in a terry towel. There it dries out a little. The still damp product is placed face down on a soft cloth and ironed with a non-hot iron. The lining fabric should be smooth, this will help preserve the embroidery relief. Patterned fabric can leave its imprints on the embroidered product.
    Places where the tablecloth does not have a pattern can beiron from the front side. The iron is moved evenly in both directions of the fabric threads so as not to stretch it. The ironed cross-embroidered tablecloth should lie straightened out for a while; you should not fold it right away.
    Here, your linen tablecloth is ready. The painstaking work is completed and now you can lay it on the festive table, surprising your guests with your talent.

    patterns Scheme for tablecloths




















    Comments

    comments