Animals, like cats - that's enoughindependent and independent kind of pet. Therefore, this beast must necessarily have his own house, which will mean their space. Modern pet stores are full of different houses, beds for seals. Nevertheless, there are options for self-equipping with the home of your cat. Make a house for the seal will not seem too difficult task. This is a fairly simple action that requires your careful attention. So, the simplest and cheapest option isto become a house made of different boxes for a printer equipped with old carpet or simply carpet remnants. This house is convenient for two reasons: on the one hand, it is a haven for the cat, and on the other hand - a surface for claws, which the cat will be comfortable to "scratch". For the execution of such a work, we can be useful:
- A box made of cardboard of dense type
- Carpet, or carpet, which has synthetic
- Litter from water (Can be a sheet in the form of hydrolyzing properties)
- Hot glue
- Knife for boots or a universal knife
- Pencil, ruler for drawing
- Adhesive tape (Either scotch tape)
It is better to choose an old carpet, since a new onethe synthetic material can have various chemical substances. Therefore, only purchased material is better to use in the process of work only after two weeks. The proportions of the box should be optimal forcat. The entrance or opening for the cat should be large enough to allow the cat or cat to enter and exit the shelter without problems. In this case, the animal should feel comfortable inside the dwelling (stand in full growth and freely move around the edges).
Preparing the box
First of all, you need to make a markup, andthen cut off the hole for the entrance to one side of the box, which will be our entrance. Then, it is necessary to glue all sides of the box, in particular, along the side parts, so that they can not open or interfere with further work. Next, you need to glue each other to the sash.
Next, we work on the material for insulation. It is necessary to cut a piece of a rectangular type. The length and the shiran must match the size of the boxes for the subsequent wrapping of the bottom and the two side walls inside your box. Using the material, push the folded line of a piece of insulation material through the inlet. Then, turn inside and apply glue to the surface, glue it to our box. Next, we cut also three pieces of rectangular ribbonsfor insulation. Then, one of them is glued to the ceiling of our house, in the interior, a second piece of glue on the back of the house. The third is laid on the floor, as a second layer of insulation. Then, using glue, we put the space around the entrance to the house and also, we paste additional tapes in the joint in front of the back wall of the house, as well as in front of the house floor. We remind you that such isolation will not allow the liquid to crawl out of the house or absorb moisture inside the house. In addition, such material will retain heat in this house.
We paste the house with carpet (carpet)
The upper surface of the house is pasted atcare kavrolina, or carpet. Then, using the frontal position of the house, we paste it with a cloth. We must wait until the material dries, and then, with the help of a knife, cut off the opening of the entrance. It is desirable that you have previously made a cutout layout. Nadresses should have been diagonal, using fake contours. Then, bend the upper parts and strips in the sides, turning them into the house, then glue them to the wall. Next, cut the bottom strips with a knife. Then, cut off the flap of a wide variety of carpet weave it also, as indicated below, in the photo. It remains only to wait for the glue to dry out and process the remaining materials. If there is a glue somewhere, it is better to get rid of it, wipe it off so that the cat does not have the opportunity to poison. Wait a few days, and then put a pillow in it. House for a cat ready!