Fishing Tube for spinning by one's own hands
The tube is a very convenient device forcarrying spinning, feeder and other rods, including conventional float rods. Possessing a fairly high strength, the tube perfectly protects the rods from damage during transportation and storage, as well as when fishing with constant movement in places with difficult terrain (cliffs, pits, bushes, etc.). In addition to protection from mechanical damage, the tube has several other useful functions, in particular, it makes transportation more convenient and protects the rods from rain, snow, dirt and other natural phenomena. The tube is most relevant for spinning rods, of which only a few are needed for fishing and which, unfortunately, break very easily and are very expensive. A tube for a spinning rod can be bought in almost any fishing store, and it is quite convenient and of normal quality. The only serious disadvantage of a factory tube is its unreasonably high cost. It is also worth noting the standard size, due to which it is not always possible to choose an option suitable for the length of the spinning rod. If you are not satisfied with the designs offered in stores, you can make a tube for a spinning rod with your own hands and in accordance with your tastes. We will tell you how to do this below, but you can choose the method of manufacture that you like the most. 1. A homemade tube for a spinning rod from a plumbing pipe. A fairly simple and cheap option, but quite practical. The design is durable, moderately heavy and wear-resistant. 2. A simple tube for a spinning rod with your own hands. The easiest way, it will take a maximum of 15-20 minutes to make. However, there may be a problem in finding the pipe used. 3. For lovers of strong alcoholic drinks. An interesting version of a tube from cognac packages. How to make, see the source.
4. Homemade spinning rod tube made of plastic profile, covered with tarpaulin. Not the best option in my opinion, but also worth attention. How to make see here.
5. Another option made from a plastic pipe, this time a folding design with a cover. Let's take a look.
Finally, a few useful ideas. 1. The most convenient lid on the tube will be one secured with a glued-in zipper.
2. For particularly “delicate” spinning rods, the inside of the tube should be finished with some soft material.As you can see, making a spinning rod tube with your own hands is not difficult, and most importantly, it is inexpensive and fast.
