A gift for the pope with their own hands is a boat with seafood. A step-by-step guide with a photo.

A gift for the pope with their own hands is a boat with seafood. A step-by-step guide with a photo.

Probably everyone faced the problem of choicea gift for the pope, but there are a lot of interesting solutions and various ideas. For example, when you come from the sea, many bring with them completely different shells, and from them you can create weird crafts. Men have a liking for vehicles, hence the idea was born to create a boat for themselves as a gift for the pope. A boat for Dad with his own hands with a description of the steps and photos. Photo №1 For the embodiment of the boat from the seafood will need:

  • Three large shells are flat-shaped, which will form the basis of the entire structure.
  • One raman, it can be taken in any size. The larger the size of this shell, the more massive the ship looks.
  • Small flat shells that will form "developing" sails.
  • To fix the whole structure you need glue. In this case, the optimum option in choosing an adhesive is a melting pistol and a rod made of liquid plastic. This material perfectly holds all the details and does not leave dark stains at work.
  • Sticks as the basis of sails, it can be skewers for shish kebab or turned branches.
  • The rope is dense, not very thick.
  • A boat for Dad with his own hands with a description of the steps and photos. Photo # 2 Start to work with the formation of the foundation. For it, glue together the three seashells, they should look the undulating side in different directions, and the side where there is a straight line, they need to be brought together in the center. The place of the joint is poured with hot glue on a glass or tile surface. It is better to glue the parts from two sides, that is, flip the shells and squeeze the glue and from this side to the junction of the parts. A boat for Dad with his own hands with a description of the steps and photos. Picture №3 Wait until the glue dries and proceedThe assembly of the second "floor" of this design. The large sink should be washed and dried. If you collected the shells themselves after a storm, they will have to boil for several hours beforehand, so that the rapans are cleared of mud, various substances, and have a pink appearance. You can use souvenir shells, which are already sold cleaned. At the center of the substrate, apply glue with a longitudinal line and fix the main part of the ship in the form of a shell. A boat for Dad with his own hands with a description of the steps and photos. Photo №4 When the glue dries, and the design becomesyou can proceed to the creation of a mast. To do this, you need three sticks 10-20 cm in size, the larger the rapan, the higher the sails. In the recessed part of the shell squeeze out a large drop of glue and fix vertically the skewer. A boat for Dad with his own hands with a description of the steps and photos. Photo №5 Neighboring sails are created similarlyway. It is important to ensure that all three sail bases are in one row. The next step is to create the visibility of the sail tension. That is, we need to glue on the mast, the stern is reduced twine for the tension of the matter, but since we have an imitation of sails in the form of shells, then the fastening will have a different character - just fix the thread on all parts of the ship in an arbitrary combination. In this case, the yarn is stretched from the stern to the back of the vessel through all the upper points of the beams, circling around each vertex. A boat for Dad with his own hands with a description of the steps and photos. Photo №6 We begin to form beautiful sails from smallshells. To fix them again, you will need liquid glue. Arrange the sails in the same order, that is, the rounded part in the direction strictly down. On each beam there are 3-6 shells, depending on the size of the entire structure. A boat for Dad with his own hands with a description of the steps and photos. Photo №7 The remaining beams of the ship are made similarway. Shells can be placed equally on different sticks, or follow the chess order. But using the prototype of this ship, strive for accuracy and symmetry. A boat for Dad with his own hands with a description of the steps and photos. Photo №8 In 10 minutes all the glue will dry and a charming gift for Dad is ready. Special warmth is brought to such a gift that is created by ones own hands and will surely please the parent. A boat for Dad with his own hands with a description of the steps and photos. Photo Number 9 At the last stage, the structure can be hidden with varnish. This will ensure the longevity of the souvenir and give a kind of smoothness, beauty. A boat for Dad with his own hands with a description of the steps and photos. Picture №10

    Comments

    comments