Wooden stand - an indispensable kitchen accessory, necessary for protecting the surfaces from hot pans and pans. Original and functional podstavochki can be made by hand. For work you will need:
- wooden squares of square section (1 sq. cm);
- smooth branch, 3-3.5 cm in diameter;
- sandpaper (medium and fine);
- hacksaw for metal;
- glue for wood.
The first step is to cut off 6 pieces of length12 centimeters. The points of the spills and the surface of the slats are treated with sandpaper before smoothness, otherwise when using the stand you can injure the skin. Now on each reechke it is necessary to mark places for grooves. Put the first 2 marks at a distance of 2.5 cm from the edges of each rack. The following labels are at a distance of 3.5 cm. The last 2 labels are at a distance of 5.5 cm from the edges. Thus, on each rail there will be 3 segments of 1 cm. The next step is to cut out three slots (they are marked by 1 cm intervals), the depth should be made 0.5 cm. If you do everything neat enough by connecting all six racks, you get an even grating. That the product does not crumble, the slats should be glued with wood glue and put the workpiece under the press for a day to dry. While the stand dries, you need to cut out the brancha knife 9 round 0.5 cm thick. After sawing the roundworm also need to be processed with sandpaper before smoothness. After the workpiece has dried, it remains to glue the rods onto it, placing them on the intersections of the rails. Then the product is again placed under the press before it dries. If the surface of the resulting stand is uneven, you can fix it with sandpaper. The stand is ready. If desired, it can be decorated with burning, varnished or left as it is - in kind.