How to make the decoration of the hair ring in the form of turquoise flowers in Kansas technique, free, detailed photos and description

December 20, 2017 handmadebase

Every woman knows how one and onlyan accessory can change the whole image. An elegant brooch, buckle or hairpin, matched by color and style, will become a real highlight and emphasize the taste of the hostess. Such a simple thing as a hair band can turn an ordinary everyday hairstyle into a festive one. In our article, we will offer several master classes on creating hair bands decorated with flowers using the kanzashi technique. Elegant crafts, which are also called silk origami, are more than 4 centuries old. It was then that Japanese women changed their hairstyles. Simple straight hair was replaced by intricate knots. All these fancy hair structures needed to be secured, and various hairpins, sticks and combs were used. Since the traditional costume of a Japanese woman was very closed and draped literally from neck to toe, hair accessories became the only available decoration. Combs and hairpins became real works of art. They reflected many aspects of a woman's life. They were an indicator of her social status, what class she belonged to, whether she was married, whether she had children. Looking at the delightful hair accessories decorated with tiny pieces of silk folded into intricate shapes, one could confidently determine the level of wealth, sense of proportion and taste of a Japanese woman. The word "kanzashi" meant hairpins used to pin up hair, but over time it came to be used to refer to any decorations made of ribbons or fabric folded in a certain way.

Bezel with turquoise colors in Kansas technique

For those who think that turquoise isshade of blue-green, we want to say - you have never seen turquoise. This natural material is considered semi-precious, and jewelers make various jewelry from it. Turquoise, unlike diamonds, has an age. The young mineral has delicate milky blue shades, which over time become more saturated blue and later acquire a deep blue-green color. Therefore, in these master classes on creating hair bands with turquoise flowers, several of its shades will be present. Option 1You will need:

Satin ribbons of blue, blue and silver color and a width of 5 cm.
A small piece of blue tape with a width of 2.5 cm.
Candle or lighter.
Scissors.
Bezel.
Tweezers.
Hot glue and glue gun.
Elements for decoration (beads, rhinestones or any other accessories for your choice).

Before you start making flowers,which will decorate the headband, it is necessary to cut the ribbons into squares with a side of 5 cm. Petals. When working with satin ribbons, they will need to be melted over the fire. Therefore, for ease of work, it is worth getting tweezers. This is not necessary, but with its help it is easier to avoid accidental burns from the flame and squeezing of the blanks during the gluing process. Now we will work with blue and silver squares. We fold them diagonally, with the shiny side outward and carefully solder the corner, which is the top of the triangle, with the flame of a candle. Once again, we fold these triangles and again melt the tips over the fire so that they stick together. Now we put the blue blank on the silver one and fold again.We get blue color inside and silveroutside. Look carefully at the photo. One of the corners needs to be cut off a little and melted again. Pay attention to the next photo. The line of holding with tweezers serves as a line along which you need to cut off the lower part and melt the workpiece again over the flame of a candle or lighter. We got a double sharp petal blue-silver.For our project we need 12 of these.petals and 10 pieces of silvery blue. We do them in the same way. Now we start gluing the flowers. For these purposes, it is convenient to use a glue gun and a special silicone stick (if you don’t have a stick, don’t worry – you can do without it). We glue two flowers of six petals each. One silvery blue, the second silvery blue.We take a silvery blue flower and betweenWith the petals of the first tier, glue one silver-blue (on the left in the photo) and one silver-blue petal (on the right in the photo). Take one more petal (again blue and light blue) and glue them to the corresponding petals of the second tier (see photo). They should be located between these petals. The third circle will be 1 silver-blue petal, which should be glued between the petals of the second circle. На противоположной стороне необходимо отобразить лепесточки наоборот. Основа для ободочка готова. Сверху приклеиваем серебристо синий цветочек, расположив лепестки в шахматном порядке относительно серебристо синего цветка. В центр композиции приклеиваем красивую стразу в качестве сердцевинки цветка. Прикрепляем композицию на ободок. From the inside to the rim and flowerglue a piece of tape 2.5 cm wide. It remains to wait until the glue dries completely, and you can decorate your hair with this original, elegant accessory. A little history of hair jewelry Accessories for creating all kinds of hairstyles have existed on earth since the beginning of civilization. It is generally accepted that they are exclusively female magic things. However, elegant kanzashi hairpins were worn in ancient times not only by representatives of the fair sex. Such hairpins in the form of long and very thin stilettos not only securely fixed the samurai's hairstyle, but could also serve as a very formidable weapon - throwing knives. Of course, such deadly hair accessories were rare, and beautiful geishas decorated their hairstyles with completely harmless hairpins with elegant silk flowers. Option 2You will need:

Satin ribbon blue and dark turquoise. The width of the tape is 5 cm.
Tape of satin blue. Belt width 2.5 cm.
Candle or lighter.
Scissors.
Tweezers.
Hot glue and gun.
Bezel.
Elements for decorating the core of a flower (rhinestones, half-beads, etc.).

As in the previous master class, beforeto start creating the flower, cut the ribbons into squares. The width of the side is determined by the width of the ribbon itself. We will need from a ribbon 5 cm wide: 8 dark turquoise, 14 blue squares. From a ribbon 2.5 cm wide, you will need 8 blue squares. First, take one square with a side of 5 cm and fold them diagonally with the shiny side outward. Now take the blue triangle and wrap the turquoise one in half (see photo). It turns out that the top of the turquoise triangle is touched on both sides by the side corners of the blue triangle. Now fold the resulting two-color triangle in half. One side is turquoise, and one is blue. Fold again so that the blue side is on the outside, and the turquoise side is on the inside. The photo shows the line along which you need to cut the workpiece. Seal the tip of the petal over the flame.We make 8 of these petals. In the same way, we create 6 more simple blue sharp petals from a 5 cm wide ribbon and 8 small blue sharp petals.We glue one flower from small petals.Glue another flower from double blue-turquoise petals. Glue the remaining 6 blue petals together in threes. Now we begin to decorate our headband. First, glue a large flower with two-color petals. Place it on the headband so that its line passes through the middle of the flower in the space between the petals. Then, glue three connected blue blanks to the headband and two petals located on both sides of the headband on two opposite sides. Now all that remains is to glue the small flower on top of the large one. Place it so that the smaller petals are in the recesses of the larger petals.On the inside, you can put on the rim and flowerglue a small piece of thin satin tape. Advice! When choosing scissors, pay special attention to their sharpness. The better they are sharpened, the less the edges of the squares will fluff up. You can also use a soldering iron or wood burner as a cutting tool. They greatly simplify the process, because they serve both for cutting parts and for melting the edges. If you decide to use a soldering iron, you will also need a metal ruler along with a special work surface, such as a ceramic tile or a piece of glass. Option 3The following product is suitable for a baby girlas an addition to a festive costume. Kanzashi petals, combined into flowers, will be a great option for a crown and a magic wand of a little fairy. You will need:

Bezel and wand (you can use chopsticks for Japanese food).
Satin tape milky blue light color is 5 cm wide.
Silver ribbon of brocade 4 cm wide.
Satin ribbon of blue and silvery colors 1 cm wide.
The tape of the same shades is 0.5 cm wide.
Hot glue and gun to it.
Tweezers
Candle or lighter. It is better to use a soldering iron.
Elements for decor (crystals, beads, beads, asterisks, etc.).

As usual, the work begins with cuttingsquares. We cut them according to the width of the tape, which means that we get blanks 4x4 cm silver and 5x5 cm milky blue. We fold the blue square diagonally with the shiny side outward. We get a triangle with the base down. We fold it again. The edges should be even.We do the same with the silver square.Since its side is smaller, the workpiece will be smaller. It will serve as the inner part of the sharp kanzashi petal. Fold both workpieces. Try to make sure that the tops of the triangles are on the same line (silver slightly below blue). Fold in half. We got the outer side of blue. Pay attention to the photo. The tip of the right triangle, which is held by the petal with tweezers, must be cut and melted.In total we make 34 of these sharp petals forcrowns and 5 for the magic wand. Now we get down to the headband. Glue the upper part with a thin blue ribbon. Choose a headband and ribbon of the same width. Matching the edge of the ribbon with the edge of the hoop will make the craft more neat. It's time to create the crown. Glue two petals in the center of the headband. One is directed to the left and one to the right. Now glue 2 more petals between them. Now glue 1 petal between this pair. And two petals on both sides as shown in the photo. Now you need to glue two petals (one will be slightly higher than the other) to the right and left of the central one. Glue another one between them. You need to glue not only the ends of the blanks, but also try to secure the petals on the sides.From four petals we create a side flower. On the main flower we add two more petals on each side (see photo). To the side flower we glue one more on top and two below on the side.We repeat the small flower in mirror image on the other sidesides of the central structure. Decorate the cores with rhinestones. We begin to create the magic wand by pasting a thin blue ribbon over a wooden stick. Connect five petals together to form a flower. Decorate the core with a rhinestone as well. Cut out a circle from a wide blue ribbon. Melt the edges with fire. Try not to hold the ribbon over the flame for too long, as this will make the circle wavy. Glue several loops of very thin blue ribbon, approximately 2 cm long, onto the outer shiny side of the circle. Make a snowflake from a thin silver ribbon and glue it over the loops. Now glue the circle with the flower and attach the entire structure to the stick wrapped in ribbon. Glue another circle of blue satin ribbon to the back of the magic wand.The decoration for the little snow fairy is ready.

Comments

comments

Bezel with turquoise colors in Kansas technique

Comments

Related posts: