How to make an elephant of plastic bottles, rubber bands, tires / Toys with your hands, patterns, video, MK

How to make an elephant of plastic bottles, rubber bands, tires / Toys with your hands, patterns, video, MK

With the help of several improvised materials, you canit is easy to decorate with your own hands the courtyard of a private house and the adjacent territory. So, now the production of decorative figurines from household wastes - plastic bottles, tires and many other things that have served their own ends, is gaining popularity. For example, there are several ways to make an elephant.

Elephant from bottles

To make such a figure (Figures 1, 2, 3), it is necessary to prepare the following materials:

  • 2 eggplants of 5 liters;
  • a section of the bicycle camera;
  • 4 plastic bottles with a capacity of 0.5 liters;
  • paint;
  • plastic eyes;
  • sand;
  • copper wire;
  • 15 cm of packing tape.

Elephant from bottles Elephant from bottles-2 Elephant from bottles-3The whole process of making a figure is easy to performwith their own hands, you can attract children to work. Small bottles should be filled with sand - this will give them stability. It is enough to pour 1/3 of the volume and tighten it tightly (Figure 4). Elephant from bottles-4Of the five-liter plastic bottles will beears and trunk are made. So, from the first it is necessary to cut off two lateral parts - they and become ears of the future garden sculpture (fig. 5). It is possible to sew pink inserts for pink ears - so the elephant will be more realistic. Elephant from bottles-5With the second eggplant, all labels must be removed andremove residual glue - this will allow the paint to be applied evenly. Do not need a pen and cover. In one side, it is necessary to make four identical holes for half-liter plastic bottles (Figure 6). Elephant from bottles-7On the back of the eggplant should be doneholes for the ears and fix the workpieces in them (Figure 7). At the bottom of the large bottle (trunk), a small slot must be made and a packing tape inserted therein. The edge of the tape should be cut a little - so it will look more like a tail (Figure 8). Elephant from bottles-8In the neck of the eggplant, insert a cutbike camera - enough will be ¼ of a piece. If the neck is wider than the chamber, you can compact it with the usual rubber bands (Figure 9). Instead of the chamber, you can use the remains of an old watering can - its spout repeats the shape of the trunk. Elephant from bottles-9At this point, you can start fixingplastic bottles with an elephant's trunk. The holes can also be compacted with rubber bands or rags. Thus, the legs of the animal are obtained (Figure 10). If desired, you can sew all the details together with your own hands, using a copper wire for this - so the design will be more durable. Elephant from bottles-10Now it is necessary to paint the resulting figure and wait until it dries completely (Figure 11). Elephant from bottles-12Eyes an elephant can be borrowed from any old plush toy or bought in a store for needlework, and eyelashes and mouth paint with contrasting colors. A figurine made of plastic bottles is ready! Elephant from bottles-11

An elephant of old tires

A large space for creativity is provided byold tires - they can become the basis for a lot of fanciful shapes. So, you can make with your hands from the tires of a nice elephant. To create such a figure it is necessary:

  • 2 tires;
  • screws;
  • shoe and conventional knives;
  • paint;
  • rubber from the car camera.

It is very easy to make tires, it can be doneown hands. Using a shoe knife from the lower tire, it is necessary to cut out the elephant's tusks, as shown in the figure (Figure 12). Instructions for splitting the tire: the knife must be made on the same cut several times, carefully pressing on the board in such a way that it expands. After that, a normal knife can be inserted into the cut and continue cutting the tire in the desired direction. An elephant of old tiresThe first bus is dug into the ground at the maximumpossible depth - it must be stable. In the front, two thin strips are cut to 25 cm in length - they will be tusks. You can attach designs of greater strength if you attach the protector part of the tire to the top tire, tapering to the end - it will simulate the tail of the elephant. It can be screwed with screws. From the second tire, the head and trunk of an elephant are cut out. If desired, you can not cut the trunk, and instead use a spout of a plastic watering can. From the pieces of the old camera, you can cut out your eyes and ears for handicrafts. All parts can be sewed together or fastened with copper wire. Elephant from old tires-2You can also make such a cute elephant (Fig. 13). For its manufacture, one bus is enough - all the cut out details must be sewn together by a thin wire. With the help of paint, you can draw the animal's eyes.

The elephant of the erasers

Great popularity in needlework nowuse a small colorful gum - they are suitable for creating bracelets, as well as a variety of figurok.Dlya create such an elephant (Figure 14), you must prepare:

  • a set of rubber bands of the same color;
  • a hook for weaving;
  • Weaving machine.

The elephant of the erasersBegin work should be from the manufacture of the trunk - this will require up to 30 elastics. We can weave such an elephant with our own hands, but for this we need patience and a little preparation. Elephant of rubber bands-2The trunk can be weaved on the hook, creating one forAnother loop of doubled rubber bands. The rest of the body is woven with a special machine - the head is fixed between several hooks and alternately all new and new rubber bands are woven into the toy. Look at the similar master classes:

Comments

comments