Creating the tail of a mermaid is quite simplean idea that will require some advice and knowledge. The element of creation of the tail of a mermaid - requires effort and certain knowledge. Therefore, be patient and get modern lessons to create a beautiful tail of a mermaid. In order to realize the beautiful tail of a mermaid, we will need a skirt. To do this, the organza material will be used, which will be used as the base material for the tail. The skirt needs to fit tightly on the waist, also - it should go down to the floor, so that there is space for working with the material. To make a skirt, you need to take measurements withfabric, and then, cut out the necessary rectangle. Then, you need to glue the edges of the fabric with hot glue, so that a very narrow plane for the skirt comes out. The seam of this skirt should be at the back. Also, you can use a thread, special to tightly sew the fabric. Then, you need to take pieces of special elastic material. This material will be used for the fin of your skirt. The fabric should be selected in the color scheme of the mermaid. These are light blue tones, the blue fins are more plausible. In addition, a fabric in the style of metallic is also suitable. You can use single-color or multi-colored versions of fabrics. Next, it is necessary to cut this cloth intospecial squares of 1 meter per 1 meter. Cut the corner of the square and turn the fabric over. Further, it is necessary to fasten the cloth with pins using a table, or any hard surface that can help. Squeeze and in every way twist the fabric until the moment it does not wrinkle and become a different kind. Then, the fabric will need to be ironed and after - shake it as if you are airing the canvas. These same actions must be repeated with the rest of the squares, depending on your desires. After, it is necessary to decorate the tail of the skirt with scales. To do this, you can use a special surface, or purchased tissue. Some decorate the surface with the help of paints, drawing scales themselves. Then, you need to attach the pieces of this tissue to thebased skirt. Then, glue with hot glue or use threads. These corners with the forms must fall so that the tail moves away from the wheel. They can be attached at different levels. Thus, you make your own version of the fin for the little mermaid, which can be supplemented with your own solutions. Design the appearance of the fin in such a way as to leave to itself only the most pleasant variations and solutions.