Vests are always in fashion and versatile. They fit well with skirts, trousers, jeans and look great on their own. Waistcoats are suitable for women of any age group and for all types of figure. Vests are created in different styles, models and from different fabrics, allowing them to be combined with existing clothes. For women with appetizing forms, a waistcoatelongated straight cut or slightly fitted with reliefs along the vertical, visually shaping them. Slender girls can safely wear short vests, emphasizing the ideal figure. Drawing patterns Using the basic drawing of the dress to the hips, you can build the pattern you need. 1. To determine the length of the product, it is necessary to measure down the center of the back 41.6 cm from the point that defines the boundary of the seventh cervical spine. draw the contour of the back, while measuring the armhole upwards of 12 cm and taking into account the measured distance of the dart, and draw it (see Figure 1) .3. the neck along the seam on the shoulder of the two elements of the product should be extended by 2 cm. 4. On the central back of the back, increase the depth by 0.5 cm and draw a drawing of the resulting neck of the back. draw a model outline of the neckline passing the vest, based on figure 1.6. arm and back to increase in depth by 1.5 cm. We lay off from the top of the received neck the gear and the back of the article and get the length of the seam on the shoulder equal to 7 cm. draw a parallel border line from the middle of the transfer at an interval of 2 cm. 8. Draw the bevel and the bottom line of the product transfer. from the top of the received neck to measure 5 cm down and draw a line of the cut in order to translate the dash onto the bulge of the chest. cut all cutting elements. To translate a dash on the chest, it is necessary to make a cut and to combine the sides of the dart. note where the warp threads look. Cutting vests and liningelements of fabric for the lining and the base of the vest, while leaving allowances of equal width on all sides. It is necessary to lay the side wall, neck cuts, and armhole elements. If the performance of the bottom is calculated in the pattern of the product, the front part of the fabric for the lining should be cut, subtracting the width of the bottom. Make a cut of the two elements of the bottom, taking into account the allowances. We strengthen the underbody with the help of nonwoven fabric and sew on the front half of the lining. We sew the lining to the waistcoat The whole vest is made with a lining. It is not difficult. The main thing is to combine all the elements from the main and lining fabric. Sew all the seams of the waistcoat and lining, leaving only the seams on the shoulders and one of the seams on the side about 15 cm so that it can be turned around. Allow ironing by ironing. Place the lining with the waistband facing each other, combining the seams and contours of the seams, and stitch along the slices at the bottom of the gear and back, sides, throats and armholes. Starting and finishing scribbling, do not reach about 3 cm to the dash on the shoulders. Cut off excess material left on the allowances, near the seams, on the curvilinear sections - insect, at the corners - obliquely. Before and the back of the article, fold face and sew the seams on the shoulders, not grasping the lining. Put your hand in the open position on the line on the lining, grab and stretch out to the outside one of the seams on the shoulder. Fix the sections of the lining on the shoulders and stitch (see Figure 2). The allowances are ironed. Sew the throat and armhole sections (see Figure 3). In the same way, treat the second seam on the shoulder. The resulting hole in the center of the back and the seam on the side, flush with your hands. Here is such an original and stylish vest we got!