How to sew a soft toy bear with his own hands on a pattern from professionals. Step by step guide to the sewing process

How to sew a soft toy bear with his own hands on a pattern from professionals. Step by step guide to the sewing process

This toy will be a real lesson for thosewho are just trying their sewing skills. Every beginner should sew a toy - a teddy bear. The most suitable option in this matter is sewing a toy based on the prototype of the classic bear of the famous company Steiff. Its undeniable advantage is that it can move and rotate its limbs. If you look from the side, it looks like an animal standing on its hind legs.How to sew a soft toy bear with his own hands on a pattern from professionals. Step by step guide to the sewing process. Photo №1It is worth noting that such a wonderful toyincludes several components with fasteners for the head and paws. At first glance, the entire process of work may seem difficult, but this is only the first impression. In fact, if you do everything correctly and consistently, then you can ultimately make the correct pattern. All the work does not constitute any difficulties or impossible actions. Even a beginner can make such a bear. The presented article will describe in detail all the main stages of the Teddy toy. The main thing to pay attention to is to strictly observe all proportions.The work must begin with creating a pattern. First, take tracing paper and use it to transfer all the main details.To make the Teddy bear look visuallyNaturally, it is worth drawing the direction of the pile above each part. Then all the elements are marked with letters and designations. To transfer all parts of the paws and head, it is necessary to mark in advance the area where the place for fastening will be located in the future. Directly on the pattern itself, the places for the eyes are marked. To make it easier to make a toy, a not very dense fabric is more suitable for work. An important point - it is imperative to draw the pattern only from the wrong side, taking into account the direction of the pile. Directly on the pattern itself, it is necessary to take into account the indentations for the seams, therefore approximately 4 mm of free space is added. All areas where fastenings will be located in the future are left openings using scissors or needles. Beginners should remember that several places should be left unstitched, because the filler will be stuffed in them.Instructions for manufacturing and assembling parts:You need to turn all the cut parts of the body and paws with the villi inward and you can start sewing. You can sew the middle seams in the front, but the back seam should remain unsewn, because the stuffing and fasteners will be inserted in that place later. Next, sew the parts of the paws. When the work is ready, they are sewn directly to the body, but all the parts are sewn strictly turned out. When everything is ready, the unfinished bear must be turned inside out and filled with filler halfway. The upper paws are sewn in a similar way. The head assembly must be assembled from the nose and sides in the same way as the other parts. Next, you can start inserting the fasteners. They will allow the paws and head to rotate. Often, craftsmen use ordinary bolts on cardboard disks. And the last stage of the work is sewing on the eyes and ears of the bear. To add special expressiveness to the bear, you can use the tightening technique. Some parts of the head are sewn with simple threads. Particular attention is paid to the nose and eyes. This creates the effect of hollows near the eyes and a convex nose. Using this technique, you can give the toy a special facial expression.And that's it!A beautiful DIY Teddy bear of the years! The described technique reveals in detail all the secrets of sewing such a toy. It can be given as a gift or kept for yourself. You just need to try and see that there is nothing complicated!

Comments

comments