How to knit knitting needles for a newborn girl, dress, gloves, coat and hat according to the instructions with photos and charts

December 11, 2017 handmadebase

Knit knitting needles for children, consisting of dresses, mittens, coats and hats. In this set, the coat and dress are designed for a child aged nine to twelve months, and the hat for three to six months. Necessary materials and tools: • Mondale Extrafine yarn (100% merino wool, density 175 m / 150 g) - for a cap of 50 grams, on a dress for one hundred and fifty grams, three hundred grams for the creation of a coat; • buttons - three on a dress and six - for a coat; • spokes number 3; 3.5; 4.5; 5, as well as an additional spoke. When knitting the set, the following techniques are used: "Double gum" pattern Using the contrasting thread, we collect 50% of the required loops. Next, the first row is knitted with a working thread - one face, one thread, and repeat. The second row is knitted like this: the cape of the obverse, to remove one loop, like the purl, without tying, the thread is before knitting, and repeat. The third and all other rows are tied in this way: one face loop, we remove one loop, like the purl, the thread is in front of the knitting, and repeat. The contrasting thread unfolds in the finished part. Facial smoothness. Facial rows - facial loops, purl rows - purl loops. Wrong surface. Face rows - purl loops, purl stripe - facial loop. Elastic. One front and one back loop are alternately front-end. Handkerchief. Face and purl series - face loop. A double braid. The width is nine loops. The first row is knitted like this: 4 facial loops, one facial crossed, 4 facial. Second row and fourth: 4 purl, one purl cross, 4 purl loops. Third row: 4 loops crossed to the left (we leave two loops on the auxiliary knitting needle before knitting, two face loops and loops from the auxiliary knitting knit with the face loops), one crossed cross, four crosses to the right (two eyelets left on the auxiliary knitting needle, two face and loop from the auxiliary knitting knit facial). We repeat from the first to the fourth rows. Shuttle Number of loops should be a multiple of 8plus 2. The first and third rows are knitted with facial loops. The second - the purl. The fourth row is knitted like this: 2 purl, 6 loops together, purl, repeat, and 2 purl loops. The density of knitting can be characterized as follows: the facial smoothness with knitting needles No. 3.5 - 26 loops x 33 rows = 10 x 10 centimeters; facial smoothness with knitting needles №5 in two threads - 18 loops x 25 rows = 10 х 10 centimeters. The knitting of the coat is carried out in half the folded thread. We knit the back We start with a set of 65 knitting needles on knitting needles 5, and for knitting we knit two rows with a double rubber band, and then there is garter stitching. At a distance of 3 centimeters from the bottom knit the facial smoothness. At a distance of 20 centimeters from the plank we knit with garter stitch, making a reduction of 8 in one row in this way: 8 facial, 2 eyelets together face, 7 facial, 3 x loop (3 eyelets together face, 7 facial), 2 loops together, 8 facial. After 1.5 centimeters we pass to this knitting: 6 stitches with purl stitch, 3 x (9 stitches with double braids, 3 stitches with purl), 9 loops with double braid, 6 stitches with purl. After another two and a half centimeters we close on both sides for the armhole in each second row 1 x 2 loops, 1 x 1 loop. At a distance of 10.5 centimeters from the beginning of the armhole, we close the remaining 51 stitches. We knit the right shelf We collect 49 loops on the spokesNo. 9 and knit two rows of double rubber band. Then we sew 20 loops with a regular elastic band and 29 with a garter stitch. At a distance of three centimeters from the bottom we knit the initial 20 loops with an elastic band and 29 facial smoothness. At a distance of 16 centimeters from the strip, make two holes od buttons: the first after the initial 4 loops, and the second through 13 loops from the previous one. After that, we perform an additional two pairs of holes with an interval of 5.5 centimeters between them. At a distance of 20 centimeters from the bar on the initial 20 loops with an elastic band, and on the remaining 29 loops with a garter stitch, making 9 subtractions on these loops according to the following algorithm: 3 x (3 loops together face, two facial, 2 loop together facial, two facial ), 2 facial loops. After 1.5 centimeters we pass to this knitting: 20 loops with an elastic band, four purlins, 9 loops with a double elastic band and 7 purlins. At a distance of 2.5 centimeters on the left, we make armholes as well as on the back. At a distance of 6 centimeters from the armhole for the neck, on the right we close in each second row once 20 loops and 4 times one loop. At a distance of 4.5 centimeters from the neck we close the remaining 13 loops under the shoulder. The left shelf is knitted similarly, but already without holes under the buttons. We pass to the sleeves We collect 82 loops on spokes number 4,5 and knit two rows of garter stitch and 4 rows of frills, total - 3 centimeters. We make the transition to the spokes number 5 and then we knit the facial smoothness. From two sides add in each tenth row three times along the loop. For the pellet, at a distance of 17 centimeters from the strip, we close on two sides in each second row four times three loops. At a distance of three centimeters from the beginning of the pellet, close the remaining 14 loops. Now we knit a collar We take knitting needles 4,5 and we collect 186 loops, we knit two rows with the help of garter stitch and four rows of frills, total - 3 centimeters. We change the knitting needles to No. 5 and close the six loops from the sides and go to the mating with the front face. After four centimeters on the bar, close all the loops. Sew on the sides of the collar edge six side closed loops. We collect the product. We begin with the performance of the shoulder joints. We sew the closed edge of the collar along the edges of the neck of the back and the front part, eliminating 50% of the shelves. Vtachaem sleeves, performing the seams on the sides and sleeve seams. Sew sew buttons. We knit a dress Again we begin to knit from the back. We take knitting needles 3,5 and we collect 83 loops. For bunching we knit 1.5 centimeters with a platemaking technique. After this, go to the surface of the surface. At a distance of 20 centimeters from the bent we knit with handkerchiefs, subtracting 12 loops uniformly in the 1st row: 14 facial, 2 x (two eyelets together face, 5 facial), 4 x (3 eyelets together face, 5 facial), 2 x (2 loops together face, 5 facial), 9 facial. After one centimeter under the central incision we knit exclusively on the first 41 loops, leaving the remaining ones open. Next, we knit: six stitches with a purl stitch, 2 (nine stitches with a double braid, three stitches with a purl stitch), 9 stitches with a double braid, two stitches with a purl. At a distance of two centimeters from the incision for the armhole, close the right in each second row once with 2 loops, twice with one loop. At a distance of two centimeters from the beginning of the armhole and before the final 6 loops make a hole under the button and after 4 centimeters we make one more. At a distance of 9 centimeters from the armhole on the right side, close 18 loops, postponing the remaining ones. After that, we knit on the open left side loops. We collect at the base of the cut from the underside the remaining 11 loops of the last loops of the previous part and we knit symmetrically, without making holes for the buttons. We knit the front part. We change knitting needles for a skirt at №3,5 and dial 91 loops on them. Similarly, we knit the back. After this, go to the front. At a distance of 20 centimeters from the bent we knit with a platelike technique, by dividing 20 loops uniformly in the first row: 5 facial, two eyelets together face, 5 facial, 9 x (3 eyelets together face, 5 facial), two eyelets together, 5 facial. After one centimeter, close all the loops. For the bodice, we change the knitting needles to No. 3, we collect 194 loops and for knitting we knit two rows with platemaking technique and 4 rows with frills, total - 2 centimeters. We return to knitting needles 3,5 and we knit 7 loops with the wrong side, 4 x (9 double-braided stitches, 3 stitches with the purl stitching), 9 double-braided stitches, seven stitches on the back. At a distance of two centimeters from the beech we make armholes similarly, as we do on the back. At a distance of 6 centimeters from the beginning of the armhole for the neck, we lay down the central 15 loops and then knit separately, while at the edge of the cut we close two loops twice in each second row, twice in one loop. After three centimeters from the cut we close the remaining 18 loops on each shoulder. We knit the sleeves. We take knitting needles # 3, which we collect 43 loops. For knitting we knit by means of a double rubber band of 4 rows, after which we switch to a regular rubber band. After two centimeters from the tying edge, we change the knitting needles to No. 3.5 and knit the front face, adding 5 x 1 stitches from each side in each sixth row. On the pellets of the sleeves at a distance of 13 centimeters from the strip, we close on each side of the second row 5 x 4 loops from two sides. The remaining 13 loops are closed at a distance of 3 centimeters from the beginning of the hoses of the sleeves. We gather our dress. First we perform the seams on the shoulders. Spokes number 3 on the edges of the neck of the dorsal and anterior part (including open loops), we collect 79 loops and knit with elastic. In the third row, make one hole under the button. At a height of one and a half centimeter from the beginning of the product, 4 rows are knitted with a double rubber band and closed with a knitted loop of a loop. Then we sew the top of the skirt to the base of the bodice from the wrong side at the level where the bake ends. Vtachaem sleeves, performing the seams of sleeves and side, and then sew buttons. We knit the hat. We type 258 loops with the No. 3 knitting needles. With weaving techniques we knit two rows and 4 rows with frills, in total it turns out 2 centimeters. We pass to knitting needles 3,5 and we knit in the following sequence: one edge, then we repeat this combination: 9 double helixes, 3 loops with the wrong side; and we finish the edgeband. At a distance of ten centimeters from the shuttle we knit the facial smoothness, making uniform downs on 8 loops: edge, then this combination of 10 facial, broach; we finish the edgeband. This decrease is repeated seven times over the preceding in each second row. Then we perform one row, making a strap at the same time for 2 loops, and the remaining loops tighten the working thread and sew the edges of the sides. And, finally, go to the mittens Start withright. We dial 41 loops on the number 3 spokes. For cuffs we knit 4 rows with a double rubber band, and then we switch to a regular rubber band. After 3,5 centimeters from the bottom we take knitting needles 3,5 and we knit this way: one face, then this combination is repeated: face, 2 loops together face, one cape; one facial. We carry out the reverse series with the wrong loop, in the next row we knit this way: four eyelets with a facial surface, two braids, two loops with a purl stripe, 24 loops with a smooth surface. At a distance of 6 centimeters from the cuffs we subtract one eyelet after the initial and before the final and two sides of the middle loop. We make repetitions of these decrements over the previous four rows, then in each second row 5 times do the same (10 centimeters from the cuffs). The remaining loops are sewn with a working thread and we make a lateral seam. We knit the left mitten similarly. That's all, our kit is completely ready!

Comments

comments

Comments

Related posts: