Children's carnival costume of the Red Hat youyou can always sew with your own hands, even if your sewing experience is minimal. In our master class, we focused on the details, and got an elegant costume in which the child looks like a doll. The calculation is presented for a child of 3-4 years old, respectively, for girls younger or older the material will go less or more.
To sew a red hat costume with your own hands, you will need:
- tulle 1.5 m red; - crepsatin orsatin red 1-1,5m; - white crepsatin 0.5-1 m; - dense satin or imitation leather of black color 30cm; - thread the color of the fabric; - oblique inlay 15m red; - satin ribbon 5cm wide white and black; - lace white and black; - satin ribbons and decorative elements of red and gold color; - gum 1.5 cm and 0.5 cm thick; - Gluey dense fabric like dublerin or a collar under men's shirts.
How to sew a suit of the Red Hat: description of work
Cutting the children's costume Little Red Riding Hood Let's start withtulle. Our petticoat will be 30cm long. Therefore, we cut out 5 bands with a width of 30 cm and a length of 1.5 m for cutting the fabric. The total length of the under-skirt without assembly will be 7.5 meters Then proceed to the red atlas. The real Little Red Riding Hood simply cannot be without a lush red skirt. Because the costume will consist of a fluffy skirt-sunklesh. To do this, fold the fabric in half along the lobe thread and mark a semicircle with a radius of 40 cm with a piece of soap or chalk And one more - a radius of 10-12cm. The centers of both circles lie at one point. We also need a belt for the skirt and petticoat. These will be 2 rectangles with the size of 80x8cm. Now we will deal with the most important accessory.carnival costume of the Red Hat, in fact, the very cap. It should be in the spirit of the time, i.e. with a large lapel and small lace around the edges. Cut our hats will be very simple. This is a rectangle measuring 40x25 cm and a drop of 12x7 cm. The sizes are presented for the child with a volume of the head of 47-48 cm. Now the corset. The corset should be 5 cm less than the length of the child’s waist so that the lacing looks beautiful. Ahead the corset will be slightly higher. We cut out the aprons from the white crepsatina. Blouse will also be made of white crepsatina. In order not to bother with the pattern, we take the base from the blouse that fits the child. I only increased the size of the shoulder, so as to make the folds in front and behind. On the back make a clasp. (on the left - in front, in the middle - the sleeve, on the right -back) Sewing and assembling the costume of the Red Hat for a girl We start with a petticoat. Sew together all 5 pieces of cut. Then we process one edge with an oblique bake. Then we remove the thread tension to zero and make the maximum line pitch. In this mode, we make a line to assemble the petticoat, then gently pull the single thread and assemble the petticoat. Already assembled petticoat will stitch to the belt. We put the gum - and you're done. Getting to the skirt. Before starting work, I treated the outer and inner edges of the skirt with a thermal method. Then the outer contour is treated with a bias. It is better to sew a bias tape with a decorative stitch. We attach the belt. Now we proceed to the decoration of gold ribbon and white lace. All skirt to suit the red cap is ready. The cap is the most important attribute of the costume, because it should look beautiful and elegant; I sewed lace on three sides of the rectangle. Then sew the remaining side of the rectangle to the "drop". Wrenched and processed edge. This is what should happen. The apron is also processed by thermo-method, we twist the edge and sew lace. The belt for the apron and strings are made of satin ribbons. A blouse we begin to sew classically - with shoulder seams. Lay the folds, sew and process the seams. We sew the sleeves along the side seam and fasten it along the shoulder. Bottom sleeves tuck and sew lace. We insert the sleeves. We process the neck with an oblique inlay and lace. The blouse is ready, all that remains is to insert the elastic bands into the sleeves and sew the decor. We sew a corset. Glue the adhesive fabric to one part of the corset. Then we sew both parts of the corset and turn it over. On the front side we sew lace with a decorative seam. The bottom of the corset is treated with satin ribbon and decorative stitching. Ahead of processing holes for the cord grommet. As you can see, to sew an original children's costume of the Red Hat with their own hands is a snap! Natalia Druzenko specifically for the site Previous article: Next article: