Making a picture in Kansas style with his own hands with photo and description.

February 20, 2018 handmadebase

The main motive of traditional Japanese needleworkKanzash - the creation of colors from the fabric material. As a rule, they decorate brooches, rims for hair, hair clips. But who said that this technique is not suitable for making paintings or panels? Our master class is the best confirmation. What we create will be a wonderful interior decoration or an original present for a loved one. First, let's define the set of necessary items:

tweezers;
green thread (mulina);
the frame is 21x30 centimeters;
a satin ribbon with a width of 25 and 50 millimeters;
candle;
half-beads;
Glue gun;
scissors;
drapes.

Procedure. From the frame, remove the glass and transfer the size of the back of the frame to the drape. We cut it out, and we get the finished base. Next comes the turn of the flowers. In our master class will be used 4 varieties of Kansashe petals. Let's start with the simplest - with a triangular sheet. Take a satin ribbon 50 mm wide, cut out a square 5x5 centimeters. To make it easier to work, you can melt the trimmed edges above the flame of the candle, so that they do not crumble. What you need to do next is shown in the picture: Similar petals will need to be made:

six for an orange flower;

eight for a red flower.

Similarly, we make petals from a narrowyellow ribbon (25 millimeters). They should also be made eight pieces (since they are an insert for red lobes). We finished the first kind of petals. The second variety. Such lobes should be made:

fifteen white from a 25 mm wide belt;
ten yellow color from a belt 25 mm wide;
one orange color from a tape with a width of 50 mm.

The third kind of petal. Such lobes require five pieces of blue tape 25 mm wide. The fourth kind of petal. These lobes should be made:

twelve yellow from a tape 50 mm wide;
eight purple colors from a tape 50 mm wide;
four lilac colors from a tape 50 mm wide.

Let's demonstrate the order of color assembling. We did not use the foundation. Each petal was glued to the previous one, and in the end they closed in a circle. Similarly we do the same with violets: We form double petals. Petals smaller (from 25 mm wide) are inserted into the petals more and fixed with glue: Six petals are needed to make such petals: eight pieces are needed for these petals. Buds are made as follows: Now go to the leaves. From the 50-millimeter strip of the atlas we cut out the shape of the sheet, after which we burn it on the contour above the flame of the candle. At the same time, it is necessary to bend the edges with your fingers while it is still warm. The shape and size of the leaves should be chosen by yourself. In total we will need:

3 green color (from the tape 50 mm);
5 dark green color (from the tape 50 mm);
8 dark-green color (from a tape of 25 mm).

After manufacturing the necessary leaves, flowers andbuds, the composition is decomposed on the basis and finely drawn stems. They are then embroidered with a triple thread using a stitch seam. After embroidering the stems, proceed to glue all the elements of the picture. Of course, one should start with leaflets. The application of glue should be carried out exclusively on the center of the leaf: At the final stage, flowers, buds and half-beads are glued in the middle of each flower: At the very end, the base is glued along the contour to the back of the frame. Then the finished product is inserted into the frame. That's all! Our painting "Violets" in Kansas style is ready!

Comments

comments

Comments

Related posts: