Master class for faking a delicate hair clip with your own hands

Master class for faking a delicate hair clip with your own hands

Charming soft blue hairpinwill be perfect for a gray-eyed girl. The added tulle gives the flower splendor, and the rhinestones glamor, so with this hairpin your girl will undoubtedly look like the most fashionable princess!Master class for faking a delicate barrette with their own hands ,. Photo №1To create a hair clip you will need:

  • The blue satin ribbon is 4 or 5 cm wide. It should be without special treatment, which gives the density to the matter, so look for light matter, otherwise the rounded petals will not work.
  • Tulle is a white, thin mesh thatis often used for festive or wedding dresses. You will need very little of it – a piece 5 cm wide and about 25 cm long. Tulle can be cut from an old ball gown or veil.
  • White satin ribbon with a width of 38 mm (or 4 cm). The length of the snow-white cut is only 30 cm.
  • Long sharp scissors. If you have thermo shears for cutting and soldering the edges of the fabric, then they will be an ideal solution.
  • Rhinestones are white with different diameters. One rhinestone must be larger to decorate the middle.
  • White thread with a needle for stapling the base.
  • Lighter.
  • Metal tweezers (used in medical practice) or a tool for plucking eyebrows, but with long sticks.
  • Transparent and strong glue, it can be “Moment Crystal” or hot glue.
  • Clamp or prikolka.

    • Master class for faking a delicate barrette with their own hands ,. Photo # 2You can start creating a hairpin decoration withany stage – make a flower, a branch or a tulle “skirt”. All these parts are made separately and then connected. To create a flower and a branch, you will need square blanks of satin ribbons, so cut the tape by 4 cm. If you do this with hot scissors, the edges will not change, and it will be easy to work with the blanks in the future. The number of blue elements is equal to the petals, so make 7 of them, another square will turn into a circle for the base. You will need 6 white parts, that is, 3 pieces for each branch.Master class for faking a delicate barrette with their own hands ,. Picture №3Fold the blue piece diagonally from one corner to the opposite corner.Master class for faking a delicate barrette with their own hands ,. Photo №4The next step is to bring the edges with sharp angles down. Do this evenly and symmetrically, and you should end up with a rhombus.Master class for faking a delicate barrette with their own hands ,. Photo №5Turn the piece over and on the reverse side, fold the right corner of the diamond towards the visual midline of the piece.Master class for faking a delicate barrette with their own hands ,. Photo №6The second corner on the left is also folded towards the center and slightly overlaps the first fold.Master class for faking a delicate barrette with their own hands ,. Photo №7Bend the piece along the conditional middle line,clamp it with metal tweezers and melt the bottom over the flame of a lighter. It is necessary to melt the satin for several seconds, then squeeze the bottom of the part well with the "paws" of the tweezers. If you are using a tool for plucking eyebrows, then quickly squeeze the lower part of the petal with your fingers after melting, but remember that the material is very hot. Do not rush to quickly melt the bends of the material, bringing the workpiece directly into the flame, in this case the material will turn black (soot) or burn through completely.Master class for faking a delicate barrette with their own hands ,. Photo №8The result is round petals:Master class for faking a delicate barrette with their own hands ,. Photo Number 9Sew seven identical petals into a single flower. Use a needle to attach the elements at the very edge of the base and pull the thread tightly.Master class for faking a delicate barrette with their own hands ,. Picture №10To create the bottom part of the flower from tulleskirts, cut a piece of white mesh measuring approximately 5 by 25 cm. Fold the rectangle along the longitudinal line exactly in half. Start sewing the crease with large stitches, forming a skirt.Master class for faking a delicate barrette with their own hands ,. Photo Number 11Pull the quilting seam almost all the way through, then straighten the fabric around the circle.Master class for faking a delicate barrette with their own hands ,. Photo number 12From the remaining blue square, cut out a circle measuring 2.5-3 cm and singe its edges over a flame. Apply hot glue to the round base and glue the tulle backing.Master class for faking a delicate barrette with their own hands ,. Photo №13A blue flower is glued to the center of the work over the delicate mesh. It should be pressed lightly to the base until the glue sets.Master class for faking a delicate barrette with their own hands ,. Photo Number 14To form two branches, you will need sharp petals. Such parts are created using a different principle of bending the workpiece. First, a square part made of white satin is bent diagonally into a triangle.Master class for faking a delicate barrette with their own hands ,. Photo number 15Then it needs to be folded again along the center of the triangle to form the same shape, but smaller. The fabric will be folded into four layers.Master class for faking a delicate barrette with their own hands ,. Photo number 16Bend the element again along the center line to create a sharp angle at the top. Clamp the element with tweezers.Master class for faking a delicate barrette with their own hands ,. Photo number 17The lower parts are often uneven, they need to be trimmed with scissors by a couple of millimeters and immediately melted near the flame so that all four layers are fused into one seam.Master class for faking a delicate barrette with their own hands ,. Photo Number 18Glue two petals together at the base (it is easier to add a drop of glue with a thin stick or toothpick).Master class for faking a delicate barrette with their own hands ,. Photo Number 19A third leaf is glued between this pair of petals, and a small snow-white branch is formed.Master class for faking a delicate barrette with their own hands ,. Photo number 20The twig is glued between any blue petals.Master class for faking a delicate barrette with their own hands ,. Photo Number 21The second branch is fixed on the other side through 3 petals. Since the number of petals in the blue flower is unclear, the branches will lie asymmetrically, which will not spoil the composition.Master class for faking a delicate barrette with their own hands ,. Photo Number 22Glue a large rhinestone in the center and glue 3-5 more shiny elements to the side of it to create iridescent effects.Master class for faking a delicate barrette with their own hands ,. Photo # 23Turn the decoration over and glue the clip. Of course, it is better to place it from one branch to another, then the flower will not look upside down on the hair.Master class for faking a delicate barrette with their own hands ,. Photo # 24A gentle and charming hairpin for a blue-eyed girl is ready. It is convenient to pin up loose hair or decorate a hairstyle.

    Comments

    comments

    Related posts:

    Default thumbnailMaster-class hair clips Kanzashi own hands - the original decoration for hair in the form of snowflakes. This detailed master class with photo and description will teach you how to make your own flowers from polymer clay for hair clips. Hairpins from tapes with their own hands with photo master-classes Hairpins with own hands from beads in the master class (photo) DIY Christmas tree bow – DIY bead weaving technique and master class