New Year's coming to us! Everywhere there are New Year's ornaments, and streets and windows of houses are filled with flickering garlands. And, of course, very soon we will put the Christmas tree, and we will decorate it with colorful balls and figures. To hang rain, tinsel and garland. This truly great holiday fills the home with comfort, and our souls - by faith in miracles and magic. Therefore, we are so carefully approaching the selection of a dress for a green beauty. And what could be better than jewelry made by one's own hands, into which we put a piece of our soul. Today we will weave a wonderful Santa Claus, who can serve as an ornament for the Christmas tree, as well as a keyring for keys, bags and other things. This lesson will not only be useful, but also enjoyable. It will dive us into the atmosphere of the New Year's Eve. Materials and tools:
- rubber (cutting) blue, white, red, beige and dark blue;
Stages of work: We will begin the weaving from below with a beard and gradually get to the pompon of the cap. So, now we will use a cut of white color. We throw the cut on the hook three times. That is, once they threw it, drew it, turned it eight, put it on again, and so once more. There must be three loops on the hook (p-li). Next, we need to transfer all three p-li from the hook to one white cut. We catch cutting with the tip of the hook, put the second end on the index finger, so that the cut was in a tightened position. Finger pull it and transfer the cut from the hook to the center of this cut. This can be done with the middle finger and the thumb, since the cuts are tight. We put on the hook that part of the cut, which is put on our index finger. Correct the cuts so that the three p-ki, which we shot, were in the center. Now there are two pensticks on the hook. We also need to transfer them to one white cut. We will do the same in the same way. This time it will be easier, because p-ki are more free. Here you can not help your fingers, but just hold the hook under the p-kami. On the hook again two p-ki, and weaving begins to form a chain. We have two chains of the chain, we need three. That is, we need to throw all the p-ki from the hook to one white cut once more. We have at the bottom three rings, which form the very first cut, and then a chain of three pen (s). Two p-ki on the hook must be marked, so as not to get confused. This is done like this: we drop all the p-ki from the hook to the cut of any other color, for example, green. When there are two p-ki on the hook, we pass the first under the second. Get the node, slightly tightened, but not much. Later we will shoot this cut. Return the hook to the last white boxes. They are wearing a green cut. We put the hook in the lowest ring. This is the ring that forms a wound cut. Now we have five prongs on the hook. Three rings and two p-ki were before. We shoot the first three boxes on one white cut, that is, this is the ring itself. The second end of the cut is put on the hook. Now on the hook again four p-ki. We shoot the first two on one cut. We throw another cut and remove all the p-ki from the hook. Two hooks on the hook. By this we have combined all the p-ki from the hook. Once again we hook into the ring and again weave oneCut through the ring and put the other side on the hook. There are four pills on the hook. We put the first two on one cut, put the second side of this cut on the hook. We take the third cut and place all the p-ki from the hook on it. The second side is hooked. So we rub six times more. We should get a semicircle of white rez-ok. Next we will weave two cuts of beige color and one white, as the face goes on. That is, when we remove the ring from the hook, we will use a beige cut. And when we weave through the first two p-ki, we also use a beige cut. But, when we shoot all the p-ki from the hook on one cut, then we take a white cut. She will imitate Santa Claus' gray hair sticking out from under the hats. A sham before the formation of a circle. Our weaving forms a chain from the side. We put the hook in the first lateral p-ku. It is wearing a green cut, we remove it. On the hook again four p-ki. We put them on one white cut. And so dial a chain of three pen. Two plus one on the hook. Begin to increase the beard. We shall be weave in a circle up to the place where the face starts, at the same time to hook in each n-ku at the side of the weaving. On the hook, two p-ki, we hook the nextp-ku and remove all p-ki from the hook to the cut-off of white color. Again, we dial a chain of three p-l, we hook into the next p-ku and shoot all p-ki for cutting. And so to the p-cu beige color. Now we need blue cuts, becausefurther we will weave a hat. We put the hook in the next p-ku and drop all the p-ki from the hook to the blue cut. On the hook, there are two blue p-ki, we also shoot them on one blue cut. We start the hook in the next p-ku and shoot the first two p-ki on the blue cut. We pass a blue cut through all the p-ki on the hook, the second side is put on the hook. We put the hook into the next p-ku, place the cuts of white color from the hook on one blue cut, put the second side on the hook. The second blue cuts all the p-ki on the hook. So plait to the place where the beard begins. When the series is finished, we will pull out the hook from the p-l and start it on the other side, that is, we will now spin in the opposite direction. When we take out the hook, hold the p-ki with your fingers, so that it does not jumped off and disband the weaving. We start the hook in the next n-ku and transfer the first two n-ki to one cut-blue of color. There are four blue pencils on the hook. We connect these p-ki, transferring them to one blue flash. Next, we hook the next n-ku and repeat the action. So we spill to the end. Again we turn around. On the hook, two p-ki, we will hook the second p-ku on the weaving. We place the first two p-ci from the hook on the cut-ku blue and put the second side of this cut on the hook. Turn around again. Fold the blue cut twice and transfer all the p-ki from the hook to it. Let's make a pompon for the hat. It will be white. We will carry Santa Claus on another hook. If there is no second hook, then you can transfer to the column of the machine or to any other object that will hold the p-ki for a while. Now reel on the hook a white cut three times. We move it further away to the hook and take another cut of white color. We also wind it on the hook three times and also move it further away to the hook. So reel three more rezinchki. Now we throw off all cuts from the hook to one white cut. It is better to fold two or three, so as not to overload. We'll put the hook in the blue p-ki with Santa Claus. We pull out the hook on which the weaving was held. Now there are two blue and two white pens on the hook. We transfer them all to the blue cut. There are two blue pens on the hook. We pass one through the other and tighten the knot. Straighten the pompon and remove the weaving from the hook. It remains to make a nose and eyes. Let's take a red cut and wrap it on the hook three times. Another cut of red color is doubled. We transfer all the pi-ki from the hook to a double cut. Now we transfer all n-ki to one white cutting. We make the knot. We put the hook in the center of the weaving. This is the very ring that formed when we wound the cut three times. You need to get the hook from the wrong side. Next, grab two white p-ki, on which the nose is put on, and tighten inward. There, we drop p-ki onto a white cut and make a knot. We hide p-ku in the weaving. We start the hook in the p-ki, which go vertically and drag the p-ku. Next, wind on the hook cut-dark blue four times. We transfer all the items to the beige cut. We put the hook into the supposed place of the eye from the wrong side and grab one side of the beige cut. We drag it inside and hook it, a little back. From the outside, grasp the second side of the detail of the eye and also drag it inside. On the back side of the hook are two beige pinks. We put them on one beige cut. We make a knot and hide it inside the weaving. Similarly, make the second eye. Our trinket is ready! It can be hung on keys, a briefcase or decorate a New Year tree. Also, using cuts of red instead of blue, you can weave Santa Claus with a red hat.