Who among us does not like to eat ice cream? Perhaps there is no such person, or at least there are not many such people. This treat allows you to cool in the hot summer, but at other times of the year you should not deny yourself this pleasure. Do you want to pamper the dolls with this delicacy? Today we'll make ice cream for toys from rubber bands on the machine. Materials for work:
- Rubber bands;
We remove the middle row from the machine. The remaining 2 rows will be rotated in different directions. Somewhere in the center we will put on 1 red elastic band for 2 pins (pcs-k) of the bottom row (nr). Pull this elastic (cut-ku) and put it on again. 2 white cuts you need to pull diagonally. Two more, crossing the previous ones. We lift the red cut from the pcs and release them in the center. We pull 4 pieces of 4 pairs of cut-ok. We raise and release in the center 2 lower cutson each pc-ke. Repeat 1 time, but now in the lower layer we have 4 cuts, so we'll raise too 4. Pull the pair cut-ok on the 1st pc-to the upper row (v.p.) and turn it to the figure-eight, the 2nd part we put on pcs to in front. Now we are doing the same on n. Only now do we hold the cut on the 3rd piece. And we connect the rows with the same pairs of cut-ok. Shaving, pouring pairs of re-ok along the entire perimeter of the weaving. We repeat the series. On a separate machine or on free machines of this machine, we will form a chain of 5 rez-ok, twisted in 2 times. You can do without the machine. On pcs-ki before 1-m pull on 1 lilac cut, turned the figure-eight. And on the pcs after the last too. We put on the hook cuts from the 2nd pc-ka n. and stretch through them a pair of lilac. We put on a lilac pair on the piece, from which the white ones were taken off. Stretch this pair of cut-ok to the 1st pc-ka v.r. Since the 3rd pc. just put the cut on the hook and pull a pair of lilac. We put it on the same pc-k, and we extend the second part to the previous pc-ka. In the same way we proceed with the following piece-com. That is, we replaced the white cuts with lilac. The same thing needs to be done on the v. We place our chain on the 2 nd and 3 rd pcs to the r.p. and on the 1st and 2nd pcs to c.r. We pull around the perimeter of a pair of lilacrez-ok and plait as in the beginning. We also raise the lower layer (4 cuts). Shave another 3 rows, the last 2 - pink cuts. Now we put pink cuts on white, again replacing the color. Screw the cut on the hook 3 times. Next, take 1 white and 1 pink cut and place the winded cut on this pair. And put this pair on 1 white cut. Such details need 10. They put on all the perimeter. We lift the bottom layer and drop it in the center. Plait 2 rows of white pairs cut-ok. Now start the hook in the last pc-to-d. and pull the inside of the bottom pair of cut-ok. We squeeze it into the previous pcs. The remaining cuts on the last sht-ke just drop. The same is done on the 1st pc-ke vr. Now there are 8 pieces left. Shave 1 row of white cutters. Launch the hook in the last pc-to-d. and pull the inside of the bottom pair of cut-ok. We squeeze it into the previous pcs. The remaining cuts on the last sht-ke just drop. The same is done on the 1st pc-ke vr. There are 6 pieces left. Plait 2 rows of white cutters. With the 1st pc-ka n. pull out from the inside 2 lower cuts and drag them to the pcs-k forward. The remaining drop. The same thing on the last pc-ke v.r. Only cuts do not drag forward, but back. We have 4 pcs. Shave 4 rows of white cuts. We put on 1 row. We reset all lower cuts, leaving only 2 on top. We start the hook and place all the cuts on it. We draw 2 white slits through all the loops. We bind the knot. The delicacy is ready!