
Master-class with step-by-step introduction on making bows with flowers in Kansas technique
Original bows in brown leopardcolor will suit not only little girls, but also adult girls. Such coloring and unusual style of the product will decorate a braid or tail and will look original at a party for any occasion. The versatility of these bows is that they suit any style of clothing, that is, they are combined with skirts, jeans, and, of course, dresses.
To create unique bows with flowers, prepare:
The product consists of several layers:the lower part is formed by a pair of bows of different flowers, and the upper part is decorated with a flower of sharp inverted petals. For the very bottom bows, you will need a wide ribbon in a brown tone. Cut a 20 cm piece from the satin. Cuts can be made with electric scissors that burn the satin or with a burner. Such tools allow you to immediately process the edges in the right way so that the delicate satin does not crumble. If you use regular scissors, then immediately burn the edges near the flame of a lighter (candle).
The blanks are glued together into a round piece, butIn this case, glue is applied to the very edge of the cut, then the second edge is pressed against the glue. The back side of the satin should be inside, and the smooth part should be outside, it is the front side.
Apply a drop of glue from the inside to the joint of the cut and immediately press it to the opposite side to change the shape of the workpiece to an eight. Create two identical parts.
Now we start making the base forbow from leopard ribbon. This tape is rep, so it is thicker and easier and faster to work with. First, cut the ribbon at a distance of 17 cm. You will need two equal cuts.
Each leopard print blank should bealso turn into parts like the number eight. These are the folds that are easy to glue together into a voluminous bow. For each product you will need two elements, and for a pair of bows you will need four parts.
The center of the bows is decorated with flowers made of sharppetals. To solder such petals you will need square blanks from the main brown tape. The size of the square is equal to the width of the tape, that is, the sides are 38 mm.
Connect the diagonal corners of the square to form a triangle.
Next, the piece is folded along the center line to form a four-layer triangle-shaped blank.
The upper corner of the workpiece is bent so that the part bends evenly and in the center. The petal will be formed from this figure; a heated wood burner will be required for this procedure.
Using a hot tool, cut off 1 mmbase of the petal, it is better to use a metal ruler, as it will press all the layers so that they can be easily soldered, and will help make the cutting line even.
Lightly singe the base of the petal, which forms the center of the flower, and immediately turn the piece inside out by simply folding it over.
First, the first pieces, which were made from a wide brown ribbon, are glued together into a bow.
The leopard print details are also glued togetherbow, but it is necessary to maintain symmetry of the contact angles so that all protruding parts of both bows have the same direction. To do this, it is easier to put the leopard blanks on a brown base and fix them in a similar way. Both layers of bows are glued together only in the center, the protruding parts do not need to be fixed with glue.
Start gluing petals to the center of the product to form a flower. The petals are fixed with glue only in the central part.
To ensure that there is no gap left in the middle of the flower, you need to place a pink rhinestone there.
Glue a hair clip to the back of the work so that the bow can be easily attached to loose hair, or used to decorate a braid or ponytail.
A wonderful pair of bows will come in handy for any occasion, they go well with pink clothes, brown shades, and also suit any hair color.