Winter is the time when children ride a sled withhills, play snowballs and, of course, mold snowmen. This master class will tell you how you can make a snowman with your child out of yarn. The lesson is fascinating and quite uncomplicated. For this we need:
- the yarn is white;
- felt blue, orange;
First we cut out from the cardboard four circles. Two of us should be big and two more small. In each mug we need to make a hole. To do this, take the scissors and carefully cut it out. In order to get into the middle, we just cut the edge of the circle. Then we take the first two circles (large) andapply to each other. Apply better so that the incisions are directed in different directions. We needed them only to cut out the middle. And now we begin to wind the white yarn on the ringlets of cardboard. The yarn needs to be rewound. It should not be very short, but it should not be long either, because it can get confused. When the yarn is finished, simply unscrew the thread from the tangle and tie it to the tip of the already wound yarn. And so we continue to wind. We wind many layers. It is necessary to wind until the hole is completely covered with threads. Again we take scissors in hand or you can use a stationery knife for convenience. And we begin to cut the yarn along the edge around the circle. Now we are threading between two cardboardcircles and tie a knot, properly pulling. We pull out these cardboard mugs and straighten out our pompomchik. It may not be exactly flat. In order to fix this, take the scissors and cut the protruding thread. That is, just cut our ball. This will be the biggest lump for ourthe future snowman. Now we will make another ball, but smaller. And for this we take two other small circles. Also we impose them on each other and wind the threads. After that, we just connect the resulting pompoms. And now we'll make a hat and scarf for the snowman. For this we take blue felt. But you can take another color. This is how fantasy will tell. And cut out the stripes, one small circle and one big one. A strip is cut out as wide as you want it to be a cylinder. And the same with the fields. Want to make more, make a little more. And the smallest circle is the top of the snowman's hat. We cut it out as large as you want. Its diameter will depend on the diameter of the cylinder. Now take the glue gun and warm it up well. We twist the strip into the cylinder. You can twist into a roll, and you can leave a void inside. We glue a small circle on top and a big one from below. Here such hat should turn out. Let's make a snowman a nose. He can have it both orange and red. We take a felt of red or orange and make a tiny little kulechek. It can also be glued with an adhesive gun or you can use a needle and thread. We make the scarf very simply. Cut the strip of the desired length from the felt of blue color (the color of the hat) and make on the edges of the cuts, imitating the fringe. We glue the nose and eyes to the head of the snowman. You can use the usual small beads or even buttons for the peephole. We will attach a hat. We'll put on a scarf. That's such a fluffy snowman we get! You can attach a thread to it and hang it on the Christmas tree. Or you can just put it on the window and admire it all winter, and maybe even not just winter.