Ways of braiding the French braid from the rubber with their own hands with a photo and description.

Ways of braiding the French braid from the rubber with their own hands with a photo and description.

If you decide to weave the original bracelet fromcolored rubber bands, but do not know yet which of the ways of weaving will help create the most effective product, then use the materials in this article. In it, we will tell you in detail how to make bracelets in the form of the so-called French braid of rubber with their own hands. As it turned out, there are many ways of weaving bracelet in the form of a French pigtail. This is explained by the fact that there are different interpretations of this kind of weaving. For some, it is a classic version of this kind of work, while for others it is the reverse French pigtail. Learning to weave bracelet French braid from colored rubber with own hands photo. Photo №1French pigtail in a bracelet made of rubber -these are two ways of weaving, but with increasing the number of rubber bands and connecting them in different techniques, products are obtained that are completely different from one another. In order to learn how to weave the necessary pattern, you should understand how to create them. The photos will help you in this. Here are two options for braiding the French braid, which are very different from each other. Let's talk in more detail about each of them and about those devices that can be used in their work.

How to weave a French pigtail on the fingers (without the machine)?

For work you will need: rubbery liked colors, clasp. Learning to weave bracelet French braid from colored rubber with own hands photo. Photo # 2 The first way to create a French pigtail from rubber with fingers (without using a machine) is as follows:

  • It is necessary to prepare the rubber bands that will beused in the work. Their shade does not play a big role, everything here will depend on your personal preferences and how you want to see the finished product. In order for the product to come out with the necessary pattern, you need to lay out the materials in a clear order.
  • On 2 fingers it is necessary to put on a rubber so that it as a result has got a kind of "eight". Put on the rubber band on the index and middle fingers to make it as comfortable as possible.
  • Then another rubber band of contrasting color (to make the figure clear and bright) should be put on top of our "8-ku", however, it should not be twisted, but left as a ringlet.
  • Conducting the putting on of rubberies one by one and following the actions described above, you will get a bracelet, which is made in the technique of the French pigtail.
  • A variation of this weaving is the addition of not one, but two or three rubber bands, so that the product can be produced with a large volume and width.
  • Learning to weave bracelet French braid from colored rubber with own hands photo. Picture №3 How to weave a French pigtail with a slingshot? There are whole sets with silicone multicolored rubber bands, along with which special tools are offered for work in this technology - slingshots. Thanks to the latter, your manufacturing process will become faster and easier. Therefore, the manufacture of rubber products will be more affordable for beginners. For work you will need: twenty-five rubberies of 2 contrasting colors you like, a slingshot, a clasp, a crochet hook. Learning to weave bracelet French braid from colored rubber with own hands photo. Photo №4 The second way to create a French pigtail from rubber with the help of a slingshot is as follows:

  • It is necessary to prepare the rubber bands that will beused in the work. Their shade does not play a big role, everything here will depend on your personal preferences and how you want to see the finished product. In order for the product to come out with the necessary pattern, you need to lay out the materials in a clear order.
  • On the slingshot it is necessary to put on the rubber band so that it as a result takes the form of the "eight".
  • Then another rubber band of contrasting color (to make the figure clear and bright) should be put on top of our "8-ku", however, it should not be twisted, but left as a ringlet.
  • Then, putting on a pair of rubber bands in this way, carefully lift the bottom rubber band, while grasping other elastic bands.
  • Conducting the putting on of the rubberies one by one and following the actions described above, in addition to the action of the first item, you will get a bracelet, which is made in the technique of the French pigtail.
  • A variation of this weaving is the addition of not one, but two or three rubber bands, so that the product can be produced with a large volume and width.
  • As a result, you will get a beautiful bracelet made by yourself. Learning to weave bracelet French braid from colored rubber with own hands photo. Photo №5 How to weave a French pigtail with a fork? This technique differs from weaving on the fingers only in that the elastic bands will be put on the teeth of the fork. For work you will need: twenty-two rubberies of 2 contrasting colors you like, fork, clasp. The third way to create a French pigtail from rubber bands with a fork is as follows:

  • It is necessary to prepare the rubber bands that will beused in the work. Their shade does not play a big role, everything here will depend on your personal preferences and how you want to see the finished product. In order for the product to come out with the necessary pattern, you need to lay out the materials in a clear order.
  • The fork should be put on rubber so that it as a result has got a kind of "eight".
  • Then another rubber band of contrasting color (to make the figure clear and bright) should be put on top of our "8-ku", however, it should not be twisted, but left as a ringlet.
  • Conducting the putting on of the rubberies one by one and following the actions described above, in addition to the action of the first item, you will get a bracelet, which is made in the technique of the French pigtail.
  • A variation of this weaving is the addition of not one, but two or three rubber bands, so that the product can be produced with a large volume and width.
  • As a result, you will get a beautiful bracelet fromrubber bands on a fork, made by own hands. How to weave a French pigtail with a machine? First let's talk about what the machine is like and how to properly work with it when weaving products from rubber bands. Learning to weave bracelet French braid from colored rubber with own hands photo. Photo №6 The installation for weaving is aspecial equipment for making products by weaving from rubber. It is made of plastic, consists of upward columns, on which you need to put on rubber. Method number 1: 1. The machine itself must be installed on a smooth, stable surface. In doing so, carefully read all the instructions that are provided in the kit, and pay special attention to the arrows of the structure. Their direction should be in the opposite direction from you. 2. We need to go to the weaving, starting with the 1st column in the 1st row. Rubber should be placed diagonally, pointing to the left side. After that, we put on the next rubber, which should also be placed diagonally, pointing to the right side. So we will continue the edge of the 1st gum. Conducting the putting on of the rubberies one by one and following the actions described above, in addition to the action of the first item, you will get a bracelet, which is made in the technique of the French pigtail. Learning to weave bracelet French braid from colored rubber with own hands photo. Photo №7 3. After that, you need to turn the machines themselves in such a way that the arrows are located in your direction. The elastic bands can also be removed with your fingers, but a more efficient device is a crochet hook. It is necessary to grab the 2nd gum from you and transfer one of its edges into the central row so that it is on top of another rubber band. As a result, the rubber will look like it was bent into two parts. 4. Similar actions are performed with respect to other gums. In this case, the direction will be due to the way you started to weave. Then you just need to remove the bracelet and gently stretch it. You will have circles that can be a unique decoration of your outfit. Learning to weave bracelet French braid from colored rubber with own hands photo. Photo №8 Method number 2: 1. The machine itself must be installed on a smooth, stable surface. In doing so, carefully read all the instructions that are provided in the kit, and pay special attention to the arrows of the structure. Their direction should be in your direction. 2. It is necessary to put on the rubber so that it as a result has got the appearance of the "eight". 3. Then another rubber band of contrasting color (to make the figure clear and bright) should be put on top of our "8-ku", however, it should not be twisted, but left as a ringlet. 4. The third rubber should be worn in the same way as the second, and then twist it, as if folded into 2 parts. We advise you to choose the 1st and 3rd gums of the same color, so that the product has an exquisite look, without looking excessively variegated. 4. The fourth by the bill rubber should be put on in a similar way, as well as the second, and then twist it, as if folded into 2 parts. Then take the lowest elastic band and remove it from one edge so that it can cover the other upper bands. 5. After we proceed to such actions: we remove the middle elastic band in the place where the side that is in contrast with it is located, as well as the lower elastic band of the same color. As a result, the pattern is completed. 6. Then you just need to remove the bracelet and gently stretch it. The edges of the finished bracelet should be fixed with a clip. You will have circles that can be a unique decoration of your outfit. For those who prefer more extravagant and original products, it is worth making the first bracelet from the methods suggested above, and those who want a three-dimensional product can be advised to create a bracelet in the second way. Learning to weave bracelet French braid from colored rubber with own hands photo. Photo Number 9 How to weave the 3rd French pigtail with the help ofForks? Such a product will suit those women of fashion who want to add to the collection of their jewelry another large product. Taking as a basis any of the above methods of creating a bracelet French braid, you need to create three pigtails from rubber bands of different shades or the same color. Next, you need to fix the ends of each braid to avoid their dissolution. Then it is necessary to weave their finished plaits one common, straightening at the same time its links. Next, the detents are removed and we collect the edges of the article on the crochet hook. Another rubber band needs to be held through the six tips of the bracelet, and then put on the retainer. At the end, we straighten all the links of the product. What you need to pay attention to avoid mistakes when weaving the French braid? Of course, it is impossible to predict in advance all the difficulties and mistakes that can arise during braiding the braid of the French braid. Learning to weave bracelet French braid from colored rubber with own hands photo. Picture №10Learning to weave bracelet French braid from colored rubber with own hands photo. Photo Number 11 The most common mistake in this processis the confusion in the combination of colors and their alternation. If you made such a mistake at the beginning of your weaving, you will notice it soon, because the colors of the rubber bands will not match. To prevent or correct such an error, it is necessary to fold the rubber bands in a clear sequence, and if you have already made a mistake, then it is better to dissolve the product. Otherwise, the pigtail will not work. I hope that our article will help you quickly and easily make a bracelet in the form of a French braid of rubber with your own hands.

    Comments

    comments