Several master classes on weaving necklaces of beads and beads, photo of finished products.

February 12, 2018 handmadebase

The word "necklace" is translated from French asa collar, put on the neck. The main distinguishing feature of this decoration is the central element, larger in size than the other parts. The necklace is known for a very long time. In ancient times it was not only an indicator of wealth or served for beauty, people believed in its magical properties. The Inca priests wore several rows of heavy gold beads of various sizes around their necks, which were believed to have magical properties. In ancient Egypt, a necklace in the form of a golden plate in the shape of a crescent moon, encrusted with amulets, was worn by the legendary Cleopatra. Similarly, the Egyptians were very popular necklace with nominal pendants. Pharaohs wore such heavy jewelry, encrusted with precious stones, that on the back it was necessary to strengthen the counterweight, in order to just walk. The most famous warriors of ancient Rome wore special necklaces. In the East, different versions of the necklace were worn by dancers. In Russia, the word necklace was denoted by collars decorated with gold embroidery, pearls and precious stones, they were worn by both men and women. Such removable decorations could be worn to any one. Over time, the appearance of this decoration changed slightly. The necklace became shorter, new variants appeared, for example, the Riviera necklace, in it stones of one kind and shape are fixed so tightly to each other that the joints and the rim are practically invisible. Such a sparkling river of diamonds or emeralds was worn in the rarest of cases. Or a necklace, which tightly wrapped around the neck, in the manner of a dog collar. Danish princess Alexander at the end of the 19th century was the first to appear in such an ornament created from pearls. To become the owner of a refined, elegant or on the contrary bright and cheerful necklace, it is enough to look into the nearest needlework shop where beads are sold. Small beads of various shapes, sizes, colors and textures will create an original and beautiful decoration. Detailed master classes with step-by-step photos from our Club will allow you to weave the necklace easily and with pleasure. The main thing is to choose good quality beads with excellent calibration. The first necklace of beads has an asymmetric shape and the lowest level of complexity (that is, it does not). Even a beginner can weave it. At the same time, it looks very elegant. It will take:

Beads of white color 10/0;
Bioconuses of blue color 4 mm;
Needle and needle for beads;
Fasteners.

The necklace is made up of 14 flower parts,connected with each other by low beads. To string a convenient length of 5 white beads on the fishing line, move to one end of the line and tie a knot. The work will take place in one thread. To thread on the line 1 bioconus, 1 white bead and pass the line through the biocone and the bead of the first circle following the course of the weaving, again thread 1 bioconus and 1 white bead, pass the line through this biocone and the next white bead of the first circle, . to end. Fasten the line and cut it off. It is necessary to make all 14 details-flowers andproceed to join them in a necklace. This is done by adding white beads. In the figure, the additional low are marked in red. In each low there can be 3-6 beads. To start each new low-joint line to pass in the nearest in the course of work beads of flowers. All connection is performed by one piece of line. Take 3 pieces of fishing line and fasten them in beads,marked in the figure with numbers 1, 2, 3. String on each segment of white beads, then pass them through the biocone, connect the two pieces of the line to one and further to recruit are already two low. Attach two pieces of fishing line in the top two"Petals" of the top flower detail. String on them white beads, pass through the cone and continue to string the beads on both segments. When the length of the necklace is sufficient, thread the finish, fasten the buckles and enjoy the result. The next necklace can become part of a very gentle headset, its central element is perfect for making earrings. It will take:

Beads 11/0, 15/0;
Pearls 4 mm, 6 mm and 8 mm;
Bioconuses 6 mm and 4 mm;

To string a piece of line with a convenient length of 6beads 11/0 and 15/0, alternating between them. Work will go to one thread, so the entire low will be shifted to one end of the line, and close the knot in the circle. The line leaves the bead 11/0. String 1 pearl 6 m, 1 bead 11/0, 1 biocone 6 mm, 4 beads 11/0, skip the line in the first of four from the biocone bead, again thread 1 biocone 6 mm, 1 bead 11/0 and 1 pearl bead 6 mm, to pass the line through bead 11/0 from which the line emerged at the beginning of the second circle, the next clockwise bead 15/0 and 1 more bead 11/0. This is the first revolution. To thread on the fishing line 1 pearl 6 mm, 4 beads 11/0, pass the fishing line through the first of the 4 beads against the clockwise direction, thread 1 biocone 6 mm, 1 bead 11/0, pass the fishing line through the pearl of the first turn and pass the line along the clock arrows through 1 bead 11/0, 1 bead 15/0 and 1 more bead 11/0. Follow the picture. All movements of the line are indicated by arrows. Attach the ringlet to the top of any turn. For the chain cut a piece of fishing line of the required length. Attach the first detail of the fastener, thread the pearl 4 mm, pearl 8 mm, again 4 mm, 1 bead 11/0, 1 biocone 4 mm, 1 bead 11/0, 1 pearl 4 mm, 1 pearl 8 mm, 1 pearl 4 mm, so alternate to the middle of the necklace, then after the bead 4 mm thread the ring with the workpiece, again the bead 4 mm and alternate the sequence of the beads and beads further. At the end, fasten the second part of the fastener. The next elegant decoration will be an excellent addition to any evening room. Required:

Bioconuses;
Beads;
Round beads;
Faceted beads;
Needle and needle for beads;
Fasteners.

Work begins with weaving the chain. Its length is determined only by the desire of the needlewoman. The first step is necessary, if the clasp is also made of beads, if there are ready, then there is no need to carry it out. String on the fishing line bead, pass both ends of the line to the bead. This is the center of work. On the left side of the line, thread five beads, on the right 2 beads, 1 round bead, 2 beads, 1 biocone, in it to cross the ends of the line. To thread on each side one bioconus, to the right side one more biocone and in it to cross the ends of the line. Again, thread on the left side of the line 5 beads, and on the right 2 beads, 1 round bead, 2 beads, 1 biocone, the ends of the line cross in the bioconus. So alternate until the chain becomes the intended length. The end can be made in the form of a loop of beads. For the second row of the product, you need to skip oneend of the line so that it comes out of the last bead, and the second of the second bead in front of this bead. On the right end of the line, thread 2 beads, on the left one and cross the line in it. One end then pass through 2 beadsnext to the last bead, 1 biocone and 2 more beads, this end is next to the penultimate bead of the first row. At the second end of the line, thread 2 beads, 1 faceted bead, 2 more beads. The ends of the line should be crossed in a round bead strung along. Repeat the manipulation to the end. Attach a pre-selected buckle and necklace ready. Very gentle and feminine, the next necklace is ideal for the warm season. It will take:

Bioconuses 4 mm;
Faceted beads 5 mm;
Beads 11/0;
Decorative rings;
Droplet large bead;
Needle and needle for beads;
Clasp.

To thread a convenient length on the length of the line: 1 biocone, 1 ringlet, 1 biocone, 1 faceted bead, 1 bead, cross the ends of the line in the next faceted bead. At the right end of the line, thread, 1 biocone, 1 ringlet, 1 biocone, 1 faceted bead, cross the ends of the line in 1 bead. On the right side of the line, thread 2 beads and cross the tails of the line in the second. Skip the left half of the line through the nearest bead, thread on it a biocone, a ringlet, another biocone and cross the tails in a faceted faceted bead. The right end of the line goes from the right of the faceted bead, and the left one on the left. String on each halve of the line 1 bioconus, 1 ringlet and 1 more biocone and cross both ends of the line in this low. Attach to the bottom of the workpiece low of 6 beads, 1 drop-shaped bead, 5 beads, cut the line through the first bead in the low. Freeze. The ends of the line are passed through the last circle ofbioconuses and rings, as in the figure. The formation of the chain begins. For each half of the line, thread 3 beads, 1 biocone, 3 beads, cross the ends of the line in a faceted bead. So weave until the chain will not need length. The last faceted bead can be replaced with a small biocone. The second half of the chain is weaved symmetrically. It remains to attach the clasp and the necklace is ready. The following necklace is made in the style of ancient Egyptian ornaments. Wearing this, any woman can feel like Cleopatra. It will take:

Beads of golden color 3 mm and 5 mm;
Beads (pearls) of golden pear-shaped shape (5x5 mm);
Faceted beads of purple 6 mm;
Pins of golden color;
Wire for beads gilded;
Crystal of turquoise oval shape with 2 holes;
Fasteners;
Nippers and round pliers.

It is necessary to make 163 blanks. 158 for work, the rest are safety. String on the pin with a loop at the end of 5 beads 3 mm. At the second end, bend the eyelet. Still need to make 2 pieces of 9 beads. For the next type of blanks, you need to thread 1 faceted bead, 1 round bead, 1 pear-shaped, 1 round again and turn the other end into a loop. The decoration of the turquoise crystal. At the end of the wire piece make a loop, thread a bead 3 mm, pass the wire through the bottom hole of the crystal, the end of the wire passes from the wrong side. Pass the wire into the upper hole, thread another 1 bead 3 mm and make a loop. The crystal should be well fixed between the beads. For the base of the necklace you need 3 pieces of gold wire of 60 cm each. Twist from one to the other into one cord. String on it 80 pieces from 5 beads, alternating with beads 5 mm. For the next row of necklace, take a piecewire larger than the first three. String on it 1 bead 5 m, pass into the first lower loop of the preform of 5 beads, thread 1 preform with a faceted bead, again 1 bead 5 mm and pass into the lower loop of the second preform of the first row. String thus the entire second tier. Fix a small piece of wire crystal into thecenter of the second tier. The third tier is formed from blanks of 5 beads. For an even larger piece of wire, thread 1 of the workpiece into the lower loop of the workpiece of the second tier, thread a 5 mm bead onto the wire, thread into the loop of the second tier, and so on. The two blanks nearest to the crystal must be made of 9 beads. The final tier. Take the next piece of wire even longer in length. Pass the bottom ring of the first workpiece, thread 2 beads 3 mm, pass into the next ring, etc. near the crystal between the blanks of 5 and 9 beads, you need to thread 4 beads 3 mm, between the workpiece of 9 beads and the crystal itself, 3 beads. On all ends of the wires, you need to put on fixatives or clips so that the beads are seated tightly, thread 6 beads 3 mm on each wire and fasten the fastener. Necklace in the Egyptian style is ready.

Comments

comments

Comments

Related posts: