How to sew an elegant, unique swimsuit with your own hands on a pattern. We sew two kinds of swimsuit for a couple of hours

How to sew an elegant, unique swimsuit with your own hands on a pattern. We sew two kinds of swimsuit for a couple of hours

With the onset of summer or a trip to the sea, the girls go for a new swimsuit. We want to offer you to make a swimsuit yourself, to attract attention to yourself on vacation and stand out from the crowd. How to sew an elegant, unique swimsuit with your own hands on a pattern. We sew two kinds of swimsuit for a couple of hours. Photo №1 Necessary materials: • Cloth about 1.2 meters (elastic, cotton or silk) • Scissors, sewing items • Rubber with a thickness of about 3 cm • Pattern swimsuit bikini style • Sewing machine. To build a pattern, it is necessary to takedone or done on an old swimsuit. Manufacturing process: 1. We increase the pattern by your size and cut from the material the elements of plaques D1, D2 and D1-D2, while leaving allowances of about 1.5 cm. 2. We spend them together. 3. The edges are wrapped two times, fastened with pins and stitched on the machine with threads that match the color of the product. 4. With a wide zigzag line, sew an elastic band, do not forget to stretch it to the required length, near the hem along the entire edge. Sew gum so that it does not crush. For the front and back, the entire length must be divided in two. As a result, we get that on the panties are evenly located all the folds. 5. Spread from the sides and the melting is ready. 6. Do the cutting of the material of the upper part: D3 - two pieces, and D4-D7 - one piece, not forgetting to leave 1.5 cm for allowances. 7. The edges of the bottom and top of the elements D3 are sewn and further we spread the stretched rubber to them with a wide zigzag line. The length of the gum is equal to the circumference above and under the breast divided in two, if the dimensions are much different from each other. If not much different, then take equal. 8. Spread the edges of the top. 9. Element D4 we put in half and sew on both sides, and through the third side we turn on the face. 10. Iron the material from which we will perform a bow, and wrap the edges from the third side inward and sew it with an inconspicuous stitch. 11. The element D6 of rectangular shape is placed in two, we sew two sides and turn it over our face. 12. The top of the swimsuit is connected with a bow with a shred of fabric, covering them like a ring in the middle. We patch the flap, and make the line unnoticeable by turning the back of the bodice. 13. We sew the edges of the bow to the top. 14. Applying the elements D5 and D7, we use the same method to make a pant for the panties sewn back in the middle. Swimsuit made. There are swimsuits, which are much easier to sew, not applying a pattern. Necessary materials:• fabric of nylon in two colors: in our case gray and apricot (1.4-1.9 m) • panties from an unnecessary swimsuit • fabric made from natural materials for a lining • paper • accessories for sewing, scissors.Process Manufacture: 1. fold in half the panties and outline them on a piece of paper separately for the front and back. 2. Cut out 2 contours of the material for the lining, not measuring to the allowances, and from the base material, already leaving the allowances of 7 mm. We sew through a wide zigzag line. to sew the front half and back half together, it is necessary to put them side-by-side to each other, to combine and pin with the pins at the edges in the places of the legs, and then sew in a zigzag line. we put out the sides of the panties. If you want, you can put a rubber band between the fabric and stitch it along the edge in a zigzag pattern. 5. on the sides we tie small ties, distinguishable by the color of the fabric, used for the bodice. remove the size of the circumference of the chest and the gap from the top of the circle to the point under it (III). D = OG-7cm. we cut 2 strips of cloth of different shades of rectangular shape with dimensions A * W, leaving the allowances of 7 mm, and 2 the same flaps of rectangular shape from the material for the lining, but without allowances. We put the outer side of a strip of colored fabric with a cloth for the lining, we spread it along the large edges and turn it out. 9. one strip is laid in half, and the other is pushed into the hole (see figure below); 10. from the wrong side, we sew strips of the same shade close to the knot. 11. At the end of the strip of fabric we connect, puncture with pins and stitch. swimsuit is done.

Comments

comments