How to sew an elegant black and white dress with a hat for a doll with a pattern with your own hands with photo, video and description.

December 31, 2017 handmadebase

For any little girl there is probably nothing moredesired toy than a doll. In addition, little girls like dolls with bright shiny outfits and decorations. It is very easy to bring joy to your child if you sew a new original dress for her doll. It is quite simple and inexpensive to do this - just find the necessary scraps. Decorations for a doll can be made from old unnecessary jewelry.The dress we offer looks quiteeffectively due to the contrast of the 2 tiers of the skirt and the neckline decorated with white lace against the background of the dark bodice. The wide-brimmed hat with a bow emphasizes the elegance of the image.For this master class you need to purchase:

jersey of white and black flowers for skirt;
white knit fabric with embossed pattern for sleeves and upper bodice;
Satin ribbon (10 centimeters) for the bow;
thin wire (350 centimeters);
Velcro (80x5 millimeters);
A narrow black braid (20 centimeters in length) for the cap;
fabric adhesive;
half a ball for ping-pong.

We begin work on making the outfit withhats. Draw the brim on a sheet of paper according to the dimensions specified. Next, cut out the pattern, attach it to a black knitted material and outline the edge lines. Cut the brim without seam allowance. Place the piece face down on the table and process the edges. To do this, fold the cut along the contour upwards to a width of 50 millimetres, and place a wire inside. Next, sew a narrow zigzag stitch along the fold; the wire remains inside the stitch, and the material is slightly stretched during sewing. Move on to the crown. Using the same material, cut out a circle with a diameter of 90 millimetres and cover half of the ball with it. The edges of the cuts of the circle are folded inwards into the ball and glued. The crown is connected to the brim. For this purpose, notches 10 millimetres deep are made on the material along the line of the internal cuts of the fields.From the face, the area of the notches is lubricated with glue andis pressed to the ball from the inside after placing the crown on the brim. A black braid is knitted along the connection contour. Let's move on to sewing the dress. We draw a drawing of the frills on a sheet of paper using diagrams #2 and #3. After that, the pattern is cut out. We take white knitwear and cut out a strip 120 millimeters long, a strip 100 millimeters long is cut out of black. Both strips are cut without overlaps. The frills are cut along the lines indicated on the diagram. A 5-millimeter-wide cut is turned to the wrong side along the cut lines, and the edge is stitched. For the outer cuts of the frills, the processing is similar to the edges of the brim of the hat. We make a lapel, the width of which will be 5 millimeters, a wire is inserted into it. We sew it with a zigzag stitch so that it is inside the seam. After this, the black frill is placed on top of the white one, and a “forward needle” stitch is laid along the top. Both tiers of material must be gathered onto it to a length of 150 millimeters.We take white elastic knitted material andWe cut out one piece of the bodice, leaving 5 mm wide seam allowances. Along line 1-2, we cut the piece for the back. Using lace or knitted fabric, we process the cuts with piping. The neckline and sleeves are processed with lush frills made of black knitted fabric. For this purpose, it is necessary to cut out 2 frills for the sleeves (80 x 15 mm) and 1 frill for the neck (160 x 15 mm). All frills have a zigzag stitch along one of the long sides, and during the stitching, the material must be tucked. We gather the remaining sides as follows: a frill on the neck to a length of 80 mm, frills on the sleeves to a length of 40 mm. The made frills are stitched and sewn along the short sides.We begin to cut out the pieces of the upper part of the bodice fromblack knitted material, leaving allowances, the width of which will be 5 millimeters. We bend the upper and side cuts to the wrong side and stitch. The darts are stitched and ironed. In the center of the piece, 2 folds are made and manually secured with several stitches. The part of the bodice made of black material is placed with the wrong side on the face of the part of white material. Then they are pulled together manually using a blind stitch, aligning the lower edges.When sewing, it is necessary to stretch the elasticwhite part, so that the black part does not gather. You should sweep the cuts on the sides and bottom of both pieces. Finally, connect the skirt to the bodice. To do this, they are folded face to face and a stitch is laid. Velcro is sewn along the back vertical cut; a bow is attached to the bodice.

Comments

comments

Comments

Related posts: