Pattern of overalls with a hood with their own hands. Easy and unconstrained create a unique and unique outfit for your pet for free

January 27, 2018 handmadebase

Owners of little pets always want toto please their little four-legged friends. Overalls with a hood - not only stylish clothes, but also a means of protection from cold, rain and severe frost. Yorkshire Terriers are gentle and affectionatecreate, and warm clothes for them a must! They are sensitive to weather changes, and can easily freeze on a simple walk. Thanks to simple patterns that can be sewn with your own hands. The main feature of the pattern is the presence of a hood, which will reliably protect the tender ears of a small dog. Believe me, it is much easier and cheaper to sew clothes for the Yorkshire terrier. This, besides, is also a fun activity! To create unique clothes you can use different fabrics, but the best choice is knitwear. It perfectly stretches, keeps warm for a long period of time and it is easy to wash it. Or, you can take any other fabric that you like best. Ready-made overalls with a hood looks simpleadorable, and you do not even want to take it off your pet. Below is a detailed instruction, thanks to which, you can easily and quickly create a pattern of overalls and sew your dog a stylish outfit. In fact, sewing a hooded overall for a Yorkshire terrier will not be difficult, even beginners will be able to figure it out. All the work will take no more than an hour, and having mastered the basics of sewing art, you can sew to your pet a whole wardrobe of amazing outfits in the latest fashion of 2014. For overalls you will need the following materials:

Pattern;

Elastic;

Lightning;

Fabric (1 meter should be enough);

2 clips for ties;

Elastic tie;

We will begin the preparatory work for sewing a magnificent overalls:

First, take all the measurements from your Yorkshireterrier. The main parameter is the length of the feet. It must be measured from the armpit, where the paw starts, and to the floor. Use a sartorial meter. Measurements should be made at the very base of the paws (there is the widest place).
After you measure the length of the back of your pet. Take measurements from the neck to the tailbone.
Using the meter, determine the girth of the animal's trunk (choose the thickest place).

Only now you can begin to build a pattern.

Draw a rectangle on a large sheet of paper,in which such sides: the length of the figure is equal to the length of the paw of the dog, and the width - to half the grasp of the paw. If you want, then add 3-4 cm in width, so that the sleeves are spacious.

At the top of the figure, draw a smooth curve.

Now we are building the pattern directlyoveralls with a hood. First draw a rectangle, which will have such sides: the length equals the length of the back, and the width - half the circumference of the trunk. To the width we add a few centimeters, so that the overall was slightly free and not restrained in motion. Now across the entire width from the left corner up and down to the very bottom we measure the length of the neck, and add a few centimeters to the resulting value, so that the dog can freely rotate its head (we denote by point A).

Now the length of the back is divided into three equal parts andmeasure 1/3 of the right angle from the bottom to the left (denoted by point B). From the right corner at the top to point B draw a line, as in the photo. After from point A to point B we draw a line that will pass under the pet's breast. Then cut out the holes for the paws near the chest line.

Cut out the remaining patterns. Fold the fabric in half from the outside inward. Apply the patterns to the fold line, and circle them directly on the fabric. Do not forget to leave allowances on the seams. For the paws you will need 2 parts, on which you need to leave a 5 cm base for bending. Near the neck also need to leave 5 centimeters for the fold, and to sew the string.

The line of the chest will be sewn with lightning, so it is also necessary to make allowances, and more.

Now go to sewing the edges of the sleeves. You need to bend them down, sew, but at the same time leave a hole for the gum.

Handle the top of the overalls, and leave the two holes for the tie. Process the bottom part, and then you can grind the sleeves and zipper. And at the end we hood the hood. It remains only to pass the elastic bands into the sleeves, and the string- in the neck. Fix the cord with the clips on both sides. Thus, in just a few hours of simple work on a simple pattern, you can make a wonderful overall with a hood for your Yorkshire terrier. Such craftspieces will look wonderful and help to protect your four-legged pet from severe colds. So do not hesitate, create magnificent overalls with a hood using our patterns and let your dog be the most satisfied pet in the world. The results of the work done and the impressions of the article are not forgotten to be shared in comments with other users.

Comments

comments

Comments

Related posts: