Pullover kimono with knitting needles, a free description of pullover kimono, pullover scheme

February 27, 2018 handmadebase

To carry out the original warm poncho it is necessary to have:

Circular knitting needles in size 3, 5-3, 75 mm
Set of straight and hosiery spokes 4 mm each
Hinge holder, extra spoke for small-length "braid" pattern, marker

Recommended yarn: Knit Picks Elegans (70% baby-alpaca, 30% silk, 100m / 50g) or similar in composition. The density of knitting is: 20 * 28 loops = 10 * 10 stocking knit - with spokes 4 mm. Features of work: pullover-kimono knits on the circular knitting needles, in the direction from the bottom to the top to the end of the pigtail pattern. Then the backrest and before knitting with straight knitting needles, each piece separately. Sleeves products in the same way. At the end of mating - all the details are sewn together. We knit for the size 38-40. The chest of the finished product: 82.5 cm. The amount of yarn: 11 skeins Yarn Knit Picks or similar in composition. Patterns: circular pattern "spit-net", "braid", "braid". "Spit-net" 3lpc - 2 loops before the canvas on the holder, 1 purl, remove 2 facial before work. 3rpc - remove 1 loop and leave behind the cloth, 2 facial, 1 purl behind the canvas. c4f - 2 hinges in front of the product, 2 front ones, 2 front ones before work, remove. c4b - remove 2 loops behind the canvas on the holder, 2 facial, remove the 2 facial after work. "Spit" pattern: Dial an odd number of loops, in this case 17. c6b: 3 loops at work, 3 facial, remove 3 facial from the holder. c6f: 3 loops before work, 3 facial, remove 3 facial from the auxiliary knitting needle. First row: (front side of knitting): 2 face, 2 purl, 9 facial, 2 purl, 2 facial. A number of the second: 2 purl, 2 facial, 9 purl, 2 facial, 2 purl. Third series: 2 facial, 2 purl, c6f, 3 facial, 2 purl, 2 facial. Row fifth: repeat as first. Seventh row: 2 facial, 2 purl, 3 facial, c6f, 2 purl, 2 facial. Row eight: repeat as the second. Reattach the pattern completely. Pattern "Pletenko" (dial an even number of loops, in this case a multiple of 6): c6b: leave 3 loops at work, 3 facial, remove 3 facial from the knitting needle at work. c6f: leave 3 loops before work, 3 facial, remove 3 facial from the knitting needles before work. Rows 1, 5 (front side of knitting): facial smoothness. Rows 2, 4, 6, 8 (even): the purest surface. Row 3: 3 front, * c6b; repeat from *, at the end of the row perform 3 facial. Row 7: * c6f; repeat from * to the end of the row. Repeat pattern from the first to the eighth row. Work: Dial 168 loops. Mark the edge of the product and the side with a marker and close the product in a circle. To paint with an ornament "a spit-grid" three repetitions. Next, separate the blade on the back part and transfer: 84 loops. Transfer the hinges of the front part to the other spokes. Bind on straight knitting needles, until the length is 31 cm from the beginning of the braids at the waist. The edge to close. RIGHT FRONT SITCH Dial 42 loops on the left side of the spoke. From the middle of the product, knit with one-sided smoothness, while decreasing one loop at the beginning of the row. For a neat edge, it is recommended that all thinning be done by pulling. In each 6th row, make 11 more decrements. Then continue knitting straight. Stop when the length is 31 cm from the top of the braid at the waist. The edge to close. LEFT FRONT SIDE It is symmetrically symmetric to the right (but the reduction is done by tying two loops together). SLEEVE On the straight spokes, 17 loops are recruited, then knit with a pigtail pattern to a length of 42 cm. To decorate the last row. Dial 85 loops on the cuff. At 40 cm finish tying. Knit sleeves with one-side smooth. The first row: 2 front, 2 purl (elastic 2 * 2), repeat to the end of the row. 1st circle (for convenience we will denote RS): * 3lpc, 3rpc, 2 purl, repeat from the asterisk. 2nd: P1, * 4 facial, 4 purl, repeat from the asterisk and stop for 7 loops in front of the marker, 4 facial, 3 purl. 3rd: P1, * c4f, 4 purl, repeat from asterisk to 7 loops in front of the marker, then - c4f, 3 purl. 4th: knit as the second. 5th: * 3rpc, 3lpc, 2 purl, repeat from the asterisk. 6th: * 2 facial, 2 purl, repeat from * to 4 loops in front of the marker, 2 facial, 1 purl. A single loop must remain in front of the marker. 7th: leave 1 loop behind the canvas, remove the marker, 2 face, 1 purl from the holder *, 3rpc, 2 purl, 3lpc, repeat from *. 8th: 2 facial, * 4 purl, 4 facial, repeat from * to 2 loops in front of the marker. 9th: (leave 2 loops for knitting, remove marker, 2 face, 2 face with extra knitting needles) * c4b, 4 purl, repeat from *. 10th: * 4 facial, 4 purl, repeat from *, at the end of the circle perform 3 purl (one loop should remain in front of the marker). 11th: remove one loop after the canvas, remove the marker, 2 front ones, 1 purl with additional knitting needles, * 3rpc, 3lpc, 2 out, repeat from *. 12th: the whole circle of elastic band 2 * 2. 13th: * 3lpc, 3rpc, 2 purl, repeat from *. 14th: knit, as in the second circle. 15th: 1 purl, * c4b, 4 purl - repeat from *, at the end of the circle perform 3 purl. 16th: repeat the pattern of the second circle. 17th: * 3rpc, 3lpc, 2 purl, repeat from *. 18th: repeat as a circle 6. 19th: repeat the pattern of the 7th circle. 20th: repeat the pattern of the 8th circle. 21st: * C4f, 4 purl, repeat from *. Lap 22-24: Repeat the circles with 10-12. Again we repeat the pattern of circles in the same sequence with 1-24. Make sure that the product does not twist during the mating process. To do this, mark the front side with a marker. Product Scheme Lace. It is knit with knitting needles. Set the row with 4 loops, * tie 1 row with the front, do not twist the blade, rearrange the loops on the other side of the double-sided knitting needle. Repeat from the sprocket to the required length. ASSEMBLY Give details a look. Steam the parts of the product with an iron. Sew up sleeves. Decoration of the neck On spokes with a diameter of 4 mm, dial 24 -30 loops and decorate the "Plait" with the required length. Knit is not tight, so it looks bumpy. Loops close. Sew to pullover. BELT Knit on straight spokes 4 mm in size, dial 4 loops and up to the desired length (each has its own). Sew to the product on the waist line in several places. Not too tight to not deform the product.

Comments

comments

Comments

Related posts: