We sew the dress on the floor with our own hands for detailed instructions with photo
Master-class on sewing evening dresses in the floorby the hands Most women have at least 1 evening dress in the wardrobe, the cost of which, most often, is high. Therefore, you can try to sew on your own elegant evening dress. It is absolutely easy to do this. Our advice will help you in this. In this article we will tell you in detail how to sew a luxurious and comfortable evening dress to the floor. It should be noted that the proposed version of the dress is very seductive, but not vulgar, but has a classic component and very bright. So, let's begin. In tailoring women's dress is very important rationallypick up the fabric material, which will become some kind of its zest. In the proposed master class, he became a scarlet silk satin. We need it a bit more than 2 m. We also need to prepare a stretch mesh. At the very beginning, we need a pattern of the future dress, which we translate into a tracing-paper. The pattern needs to be transformed. First, we model before the bodice. We need to provide a detachable side and an insert of light material. Then we transfer the recess on the chest, so that in the end,It was revealed along the relief line. And then we put a new line of undercut. Next, cut the paper tracing paper on the planned dots, going from the shoulder level, and close it. The relief dotted line is drawn to the very end. We need to cut the bodice on the end line and we will glue the recess on the chest, coming from the shoulder. We make an incision to pass the dress along the line, located at the waist, to the point having a relief. We close the waist at the waist, create the model of the target of the bodice, applying the possible lines of the cut for this part. In the same way, draw a coquette from the shoulder area. Scissors divide the resulting details diagonally, lay a recess on the back of the product, taking into account the conjugation of all the lines. Model the bottom of the dress. We draw a line of the level at which our skirt will narrow, retreating from the waist of 45 cm. We subtract along the sides and the seam in the middle for 2 cm to ensure narrowing. At the bottom of the dress we measure the desired length and extend the sideline. At the same time, we spread the sidewall 20 cm in relation to this straight line. The same actions must be carried out on the sides,line in the back of the future dress, in the same way flap. For the flap, we also close the recess located at the waist in the front part, as a result of which we increase the flap. The line of the lateral fold is expanded by 4 cm andwe process glue from the back side. To qualitatively draw a model of the central folds on paper, you can apply the templar a distance just beyond the fold line of the crease width. We begin to lay out the details obtained on the tracing paper on the fabric material. We cut out all the details, making an allowance of 1.5 for the seams. The details already cut from the fabric are made moresolid dublerin, and already cut the sections with a sticky half-centimeter tape. To impart a hardness to the middle seam, we apply a stretch doublerine. We make stripes from this material along the more trailing side. The width of the strips is 3 cm. We advise making duplicate parts in 2 sets: first we work with an iron without applying stripping, and then with steam. Stitch the line, not climbing the buckle, and begin to glue the elements from the middle seam. Sections need to be swiped without delay. We chop and grasp the recesses on the waist line. If we take into account that we have taken a rather delicate fabric, we must very carefully fix the endings of the lines. At this point, you smooth the middle seam and grooves. We pass to the lightning: first we hint it, and then we sew it in the intended place. We begin to work with the elements of the top of the back, smoothing their middle line. Turn the neck from the back side. To prevent wrinkling, we cut the seam allowances in places, turn out the front side. Clamp this place, manually create the shape of the edge. This part is again turned upside down and we put the mesh element of the specified part. We cut the layers and then we weak them. Turn out the front side and carefully iron it. The diagonal of the back is strengthened with a doublerin. We need to cobble together, and then sweep the top and bottom of the back of our dress. We begin to work on the front of the dress. We grind the recesses on the chest. Note that the recess must be pressed upward. In front of the skirt, we remove the folds planned at the sides and in the center. We connect the skirt of the dress with the bodice, then we straighten it and smooth it so that the slices are bent upwards. We determine on the transparent details allowances for seamsand attach them. We start processing the slices of the product, which is placed upwards. The allowances need to be processed with an iron in the direction of the opaque fabric. By the same principle, we connect two parts of the dress (side with the central). We need a piece of paper cut from paperthe calf, for finishing the transfer of the cutout of the neck. We take the main fabric, we make a pattern of obtachka with allowances for the seam in the part of the neck, and the outer side is left without them. We reinforce the obtachka with a doublerine, leaving the outer edge obtated. On the neckline we sew the obtack, cut itallowances for seams. To fix the obtack at the cut, we direct the allowances to the seams in its direction, then we spread out 3 mm from the seam. Work with the neck is completed by smoothing it. We start to process the diagonal line of the cutoutbehind our dress. We take a curve, add it so that the recesses are closed. Having placed a tracing-paper, we mark on it a dotted line. The back cut of the dress is processed in the same way as its neck. Shoulder joints are recommended for sewing with an overlock. We smooth the allowances in the direction of the backrest. We take the grid and cut it from the diagonal line of the strip, the width of which is approximately 3 cm, and we process them armholes. Stitch the resulting strips from the outside to the dress, leaving a 4 mm allowance for the seam. We smooth the strip. We process the edge with a machine stitch, we pass through the iron. Work on the armhole is over. Overlock also treat the side seams, we smooth the allowances in the direction of the back. The Moscow seam treats the lower part of the dress. The neckline is decorated with hooks, as an element of decor, and our elegant dress can be worn for the next party!