We sew a rabbit tilda fat man, a master class, video / Toys with own hands, patterns, video, MK

April 17, 2018 handmadebase

Author: Zanoza In this master class we will sew a hare of a fat man in the style of a tilde. And, I hope, my master class will be useful to you in this. zayac-tilda29 To sew a hare with your own hands, we will need the following materials:

fabric: flannel of two colors, linen, lining;
filler (fluff, sintepon, holofayber);
threads of a floss (for embroidery of a nose);
black acrylic paint and blush for "make-up";
sewing thread.

Operating procedure:

Pattern print out, first increasing to the correct size. The height of the hare is 25 cm.

On the green flannel we transfer the pattern of the frontpart (abdomen) and mark the points vertically. Apply the workpiece to the yellow flannel, puncture the pins and stitch the right half of the abdomen along the contour to the central points. Similarly we proceed with the left-hand side.

Fold the workpiece with the abdomen inwards and transfer the pattern of the back. Sew the details on the sewing machine, (except for the place marked with a dotted line on the pattern). Cut out the workpiece, stepping back from the edge 3-4 mm.

We fold the yellow flannel twice and transfer the pattern of the head, hands and tail. For the ears we take flannel and flax. All the details are sewn on the sewing machine and cut out.

Turning the workpieces, do not forget to iron them. All the details are packed tightly with the filler and sew the notches with a hidden seam. We begin assembling the hare.

First we sew the head to the body with a hidden seam. Ears folded in half and pin to head with pins. Then we sew with a secret seam (so that the ears do not fall, it will take a little to sew them together). Do not forget to sew a tail.

And now almost the most responsible part,formation of the muzzle. Although we both have a tilde hare, and Tone Finnanger, as everyone knows, has no nose and mouth, an exception is made for hares - you can embroider a muzzle. Which is what we will do.

First you need to embroider a rabbit's nose. And it will not be much work. We mark the triangle on the spot of the future spout and embroider it smoothly, gradually reducing the size of the stitches.

Upon termination of formation of a nose, we deduce a string onlevel of the mouth. Depending on what you want to make a hare - important, surprised or cheerful, choose and shape the mouth. After the end of the embroidery, we remove the thread from the back of the head and cut it, slightly stretching it.

The muzzle is almost ready. We draw with acrylic paint the eye-point and, of course, like all dolls in the tilde style, we put the hare on the cheeks blush. We pass to the second part of the master class, to tailor clothes for our rabbits.

And we sew our fat man a jacket of linen andlining fabric. We fold the flaps with the wrong sides outwards and transfer the pattern. Then sew on the contour on the sewing machine. At the top of the collar we leave a slot for eversion.

For sleeves, fold the flax by half and transfer the pattern. Attention: before sewing details, tuck the bottom and stitch. The sleeves are also sewn along the contour.

All the details are cut out, twisted and ironed. The slot in the collar is sewn with a hidden seam. Try on a jacket. The same thread that embroidered his nose, sewing a jacket to his stomach, imitating a decorative clasp.

Immediately sew and hands, beforehand them into the sleeves. We take out the needle at the shoulder level and sew through both hands. This method allows our fat man to "move" with his own hands.

We tie a bow around the neck and enjoy the result. Our tilde is ready.

zayac-tilda28 If you think that in the next master class we will make a doll, then you are mistaken. We will sew again . Do not be surprised, rabbits, as they say, do not happen much.

Comments

comments

Comments

Related posts: