The most comfortable and common optionhome clothes - this is a dressing gown. It fits all and is loved by people from small to large. It is important to choose a model, but do not forget what we are choosing to pick up a robe material. Dressing gowns people wear in the country, in the kitchen, after the bath and for every situation the fabric from which clothes are sewn is the most different. In the beginning we will consider the simple model of a dressing gown. Dressing gown of usual cut, with a smell, double-breasted with a waist at the waist. Turn-down collar, view of the Schalke. On the right shelf we will make a nice patch pocket. The sleeves will be straight, vtachnye, have a length of 7/8, end with cuffs. The gates and cuffs are advised to be made from material for finishing or simply to fasten. For what you are more suitable for such a model, you decide on your own. For the drawing of the pattern it is necessary to construct the basesgowns that will be useful for the next sewing of other things. We construct separately a back and a shelf on a paper. In the beginning, you need to move the dart, in this style, into the armhole. After some action, the shelf acquires this external appearance. We perform a pattern of a straight robe, therefore it is required to adjust the lines to the proportions on the sides. To provide freedom of movement, it is enough to increase the width of the dressing gown at the bottom. But this is the simplest version of the pattern. If you want your gown to fit perfectly on your figure, then build a pattern more complicated. The gates are finally closedsmooth curvilinear line c7c1, following the rule: to the center of the gate, the stitching line must go at an angle of 90 degrees. The deviation can be of absolutely any configuration. In our sample, the departure feature has a traditional simple shape, which is suitable for a simple gown, and goes smoothly with a curved line. We recommend that when using voluminous materials for sewing a dressing gown, deepen the armhole and, naturally, increase the width of the sleeve. Council. On the shelf on the left side, on the waist in the seam of the undercutting, make a belt-string, which has a length of about 250 - 300 mm. A similar belt to sew to the seam from the side to the right on the inside, but slightly higher than the waist. As a consequence, there is no bending and opening the gown of the robe to the left. And the shelf on the right lies on the top of the shelf on the left and is fixed with a string. After building the pattern, transfer it to the fabric and cut out, leaving the allowances on the seams. The fabric for tailoring you choose yourself. It can be a warm terry cloth and light silk. Also you can combine several types of fabric or colors. In any case, a robe sewn with your hands, will be for you the most comfortable and favorite dressing gown!