
Sew a stylish dress-case for a woman with her own hands, using a pattern, step-by-step description with photos.
A sheath dress is a versatile outfitstylish woman. You can wear it to the office, and after adding a couple of original accessories, go on a date in it after a hard day. You can create such a dress with your own hands. In this article we will talk about several ways to sew a sheath dress, using a pattern and a photo. You can sew such a product quite quickly and quite simply, so it can be recommended for beginner needlewomen.Let's first figure out what we arerepresents this dress? This is a narrow model that emphasizes the figure well, has a rounded neckline and no collar. The undoubted advantage of sewing such a dress model yourself is not only its originality, but also the possibility that the product will fit well according to your figure. At your request, the model can be created with sleeves or without them. The dress can be created in length below or above the knee. Therefore, we advise you, when choosing a model of such an outfit, to twirl in front of the mirror for a few minutes and carefully evaluate which one will be more suitable for you. So let's get started. To create the first model of such a dress you will need: a piece of fabric measuring one and a half by two meters; threads of the corresponding color; scissors.
Learning to sew a sheath dress 1.First you need to create a pattern drawing using your measurements. You can take the sample we offer as a basis, transfer it first to paper, and then – onto the fabric. Mark the modeling lines and use scissors to cut out the details of the future dress from the fabric.
2.On the front side we sweep the darts, as well as stitch them in, then iron them, focusing on the direction towards the center of the flap. In a similar way, it is necessary to process the darts on the back side. 3. Baste and then sew seams on the sides of the product. 4. Sew a hidden zipper along the back side. 5. We cut out a facing for the neck of the product, the width of which will be three centimeters, then baste it to the dress. Then you need to turn it inside out, remove the facing and iron it thoroughly. 6. Treat the sleeves and bottom of the dress.
And here is another pattern for a sheath dress, whichcan be used to sew a classic little “black dress”. To create such a dress model, we will need material made from wool, jersey, or gabardine. If the width of your fabric flap is about one hundred forty – one hundred and fifty centimeters, you will need one length of the product, adding to it only fifteen – twenty centimeters. Therefore, it is so important to initially select the required length. Having a basic pattern, you can make a dress, which is called “for yourself,” taking into account the individual characteristics of your figure. We offer a pattern for a standard figure, so before you start cutting, you should definitely compare your measurements with those given by us. If necessary, make adjustments to the drawing according to your parameters. When making the cut itself, add more fabric in those places where you plan to “adjust” the fabric. product. Also keep in mind that the product may have a lining, this will be especially true if you have chosen transparent fabric as the main material. You can make a pattern for the lining using the basic patterns of the product.
So, you need to cut out a dress for thissuch details: front yoke – one piece; front side – one piece; back – two parts; front side neck facing – one piece (it needs to be removed from part of the yoke, while repeating the contour of the neckline and at the same time this line; at a distance of four centimeters, draw another line, which will become the outer cut of the facing); facing of the neck of the back side – two parts (it needs to be removed from part of the back, while following the contour of the neck); facing of the front armhole – two parts; facing of the back side armhole – two details.
Stages of sewing a dress:We offer you step-by-step sewing of a dress without lining: 1. On the front side, we baste the darts, as well as stitch them in, then iron them, focusing on the direction towards the center of the flap. In a similar way, it is necessary to process the darts on the back side. 2. Sew the yoke to the main part of the front side, overcast and iron the yoke. 3. Stitch the central sections of the back side. 4. We sew in a zipper. 5. We sew down the central sections of the back side to the mark. 6. We sew the seams along the shoulders. 7. To make the facings more durable, they must be treated with an adhesive pad, then sew the facings along the seams along the shoulders, then – We sew over those sections that are open. 8. We process the neck with facings. 9. Sew the seams on the sides. 10. We process the armhole with facings. 11. Having tried on the dress and finally decided on its length, we process the bottom line. Your sheath dress is ready!