This article tells how to sew warm and comfortable pants for a boy on an elastic band

December 15, 2017 handmadebase

In this MK I want to suggest easy to sew functional panties for the boy. Such a product, depending on the chosen fabric, can be worn at home, on the street or used as pajamas. Fig. 1 On different resources, there is a lot of information on sewing baby panties, and this option seems to be the easiest. Because now it's getting colder, I decided to make warm panties. For the manufacture of panties you will need:

terry cloth;
fabric "hem" in color to the terry;
scissors;
elastic band with a width of 2-3 cm;
thread in the color of the fabric;
The threads are bright, very different from the color of the fabric (to make a note and easily remove it);
paper for the pattern.

To create a pattern, take your trouserschild and circle in a straight line on the paper where the pattern will be built. Add 1 cm to all the lines and cut them out. I skip this step and immediately cut it out onto the fabric. It turns out one detail on two legs, an anus and in front. Fig. 2 Sew all four identical parts. Fold the parts so that the pattern or the front of the fabric is pointed during stitching. If you use a sweat cloth, make sure that all the cut out details of the pants of the hairs of the mahra are directed in one direction. If the pile is lying in different directions, the product will look ugly. Now proceed to the processing of the bottom of the pants. In shops usually sell such panties without elastic under. I sew these pants for pajamas. And when the child is asleep, he, of course, turns in different directions, and pants without elastic bands in the lower part of the pants rise to the knee. So I decided that an elastic band is the best way to avoid this. We take the fabric of the hem and measure it on the lower edge of the leg, while stretching the fabric well. If the elastic is size in size, then it will not hold. As a result, the fabric will be slightly larger than the pant leg, folded in half. Fig. 3 If you fold the future elastic band from the fabric of the hem and attach it to the sewn leg, it will be noticeable that the hem is smaller. Fig. 4 Sew the elastic band face to face and fold it in half to make a fold. Fig. 5 Now the folded elastic band from the hem is applied to the front side of the finished trousers and we sew it with bright threads. Fig. 6 Stitch along the stitching stitch. I did it on the overlock, if not, then you can just stitch a zigzag line. Fig. 7 So you need to do with the second leg, starting with fig. 3 in Fig. 7. For convenience, measure two identical pieces of gum immediately. I took a width of 10 cm. After I folded the elastic, in the finished form the width of the rubber was 5 cm. After you finish with the bottom, it should look like this. Fig. 8 We turn the panties to his face. Let's see what happened. Fig. 9 With the bottom of the pants finished. Now proceed to finish the belt. We measure the fabric of the hem along the upper edge of the pants, stretching the elastic band well. It should look like this. The elastic should be slightly longer than the panty folded. Fig. 10 If we put the elastic in half, it should be shorter than one side. Fig. 11 Sew gum to face. Fig. 12 This time we do not fold it in half, as in the bottom part, but we sew only one side of the rubber band with bright threads. For a good distribution of the gum, mark with chalk the four identical segments, so that the intended parts of the rubber band coincide with each of the seams on the panties. Fig. 13 All that we have marked with bright threads - we spend and remove the note. Fig. 14 What we have asked for - we'll check it out and see how it turned out. The remaining neprishity gum edge to bend in half, and the second edge unfiled gum is to look at the wrong part. On the wrong side of the untreated side of the gum need more time to wrap and tack bright thread. The rubber band on the belt should look like this. We look, that should turn out from the front side. We leave a small unmarked place on the side of the panties. There is a gut-wrenching our pants and stitched by 1 mm below our gum on the reverse side seam should go right on the edge of the gum. Fig. 15 We left an un-sewn edge of a rubber band - a hem. There we will insert an elastic band 2-3 cm wide. I have 3 cm, you can take the one you like best. Measure the gum on the belly of your child so that it does not press and was not too loose. At one end of the rubber band we hook a big pin and pass through the entire belt, make sure that during the stretching the rubber band does not twist. Sew the two ends of the elastic and sew the previously left gum-hem. After we all asked, they removed the note, put in the elastic band and sewn the last area under the elastic, we should get such simple and very comfortable panties! My child very much likes such panties, they are free and very pleasant for the body. Thank you all for your attention.

Comments

comments

Comments

Related posts: