Looking at these plush beasts, it's just impossible to hold back a smile! To create a bear, the following materials and devices are needed:
- yarn of yellow and white flowers ("Children's novelty (Pechora)" -100% acrylic (200 m in 50 g)
- a little black yarn,
- hook number 3,
- sewing needle,
- eyes or beads,
- 4 buttons for attaching limbs,
- sintepon or holofayber as a filler.
All the details of the toy are knitted separately, in columnswithout a crochet (further st.) in a spiral, and then sew together. Use a contrasting thread or a marker to indicate the beginning of the row. Knitting all parts of the bear begins with a sliding loop and ends with a connecting post. First of all, we bind the head of yellow yarn. We make a sliding loop and we sew 6 columns without a crochet. In the next row, we make an increase in each loop, tying two bars together. In the 3 rd row we make an increase (further pr) through 1 loop, in the circle we get 18 loops (further n.). In the 4th row, we make through 2 loops, it turns out 24 points. In the 5th row, we make through 3 loops, we get 30 points. In the 6th row, we make through 4 loops, 36 turns out. In the 7th row, we make through 6 loops, it turns out 42 p. From 8 to 14 row (7 rows) we sew 42 p. on a circle without changes. From the 15th row, we make the deductions (hereinafter referred to as the "U."), tying 2 loops together. We alternate 5 tbsp. and 1 ub. 6 times - we get 36 p. In the 16th row we alternate 4 tbsp. and 1 ub. - 30 p. In the 17th row we alternate 3 tbsp. and 1 ub. - 24 p. In the 18th row, alternate 2 tbsp. and 1 ub. - 18 loops. The bear's head is ready. It should be tightly filled with filler. Let's go to knitting the body. We also use yellow yarn. From 1 to 7, the body torso exactly the same as the head. As a result of the increase in the circle, 42 p. Turned out. From 8 to 11 row (4 rows) we knit 42 p. In the 12th row we alternate 5 p. And 1 h. - we get 36 loops. 13 and 14 series are at 36 st. each. At the beginning of the 15th row we make 6 in a row, then we sew 24 sts. - we get 30 points. Decreases of this series form a kind of puziko bear cub. This side will be the front part of the body. In the 16th row, make a job. every 3 tbsp. - 24 p. From the 17th to the 20th row (4 rows) we sew 24 st. In the 18th row, make a job. every 2 tbsp. - 18. The knitting of the torso is over. We leave the thread for stitching the head and body. Fill it with filler. Now we connect the lower paws. We start the work of white yarn. From 1 to 5 the row is knitted in the same way as the head. We get 30 p. 6 and 7 series are 30 st. each. At the end of the 7th row, we change the thread to yellow. In the 8th row we make a contract 6 ub. and we sew 18 items - it turns out 24 st. The front part of the leg was formed. The 9th row is 24 pips. In the 10th row, alternate yb. every 2 tbsp. - 18 p. From 11 to 17 row (7 rows) we knit on 18 st. without changes. In the 18th row it is necessary to produce a ub. through each loop - 12 p. In the 19th row we knit 12 pips in a circle. Now we fill the paw with a sintepon. The lower part is denser. 20 row - consists of 6 penalties. And we continue to do them until the hole is completely closed. We hide the thread and cut it. In the lower part of the paw, you can make 2 extensions and form fingers. The second foot should be linked exactly. We knit the upper paws with white yarn. From 1 to 3 a number of knitting patterns are similar to those of the head. It turns out 18 points in a circle. 4 and 5 rows are knitted unchanged for 18 st. In the 6th row, we immediately make 3 ub., And then - 12 st. It turns out 15 p. From 7 to 9 (3 rows), we sew around 15 circles in a circle. every 3 loops - 12 p. From 11 to 13 row (3 rows) we knit in a circle of 12 st. We fill the part with the synthepon. The 13 row consists of the allowances (6) that we make before closing the hole. We form the fingers. Similarly, we knit the second upper foot. Let's go to knitting ears. In the sliding loop, dial 8 tbsp. and close them in a semicircle. We turn the future ear and bind 2 air lifting loops, 3 items, an increase, 4 tbsp. - 10 loops. We unfold and knit: 2 air loops, 4 items, an increase, 4 tbsp. The eye is ready. We leave the thread for sewing. From the white yarn, you can tie a white inner insert, consisting of 2 circular rows. Sew the inserts to the ears with a white thread. The bear's muzzle is knitted with white yarn andconsists of 4-5 circular rows. It can be tied with a finer yarn. And, finally, the tail. 1 row - we knit 6 tbsp. in the sliding loop. The 2nd row consists of 6 pr. - 12 p. The 3rd row consists of 12 st. All parts of the body are connected. Let's proceed to assembly. On the head we make a small dent and fasten the eyes. Or sew large beads in the grooves. We attach the head to the body. Do not forget that in front of the bear has a small tummy. We sew the muzzle, filling it slightly with a filler. Before sewing up our ears, we find a convenient location for them. Now you need to fix the paws so that they canmove. First we sew the lower legs. It is necessary to prepare a double yarn of yellow color. Enter it from right to left in the lower part of the body, fixing one of the paws on it. At the injection point, leave 2 threads 6-7 cm long. Now the needle and thread unfold and return it to the insertion point, dragging it through the paw and trunk to the same point. We pull the two left ends and tie the knot. Tips cut off. We attach the second paw - make sure that the legs are symmetrical and touch each other at the bottom. Stretch, make a stitch (or use a button). And we draw a thread from the opposite side between the paw and the body. Cut the threads immediately under the needle, tighten and tie a strong knot. The ends are cut off. The lower legs are fixed. By the same scheme, we also sew upper paws. Thanks to this combination of paws, they becomemobile. The figurine of our bear cub has already taken shape. It remains to sew the tail. In doing so, you can make a teddy bear. Enter the yellow thread behind in the place where there will be a tail and show in front of the navel. Make a small stitch and return the thread from the starting point. A little stretch and tie the knot. We cut off the ends and sew a tail to this place, slightly filling it with filler. We embroider bear cub and nose. On the top of the head we make a small hairdo. Our sun teddy bear is ready! He knows how to sit. And even stand alone! The height of the yellow bear is 18 cm, and the brown one is 21 cm. It is connected with their more dense yarn crochet number 3,5. Such lovely cubs turned out!