Bind the original toy crochet, using detailed instructions with photos and diagrams

December 19, 2017 handmadebase

A crocheted pillow toy for yourchildren Toys, connected with a hook, have gained great popularity to date. It is worth noting that the production of such toys does not require you to have great knowledge and long experience in working with the hook. Today we present to your attention a toy-pillow in the form of a bunny crocheted. For its manufacture you will need:

blue yarn of the company Richard Simon, brand "Angelina" (thirty grams of yarn, consisting of seventy percent of cotton and thirty percent of viscose);
yarn Semenovskaya "Arina" (thirty grams of yarn, half of wool, half of acrylic) in various colors: ten grams - yellow, twenty-five grams - gray, five grams - pink;
pieces of rubber of round shape, the thickness of which is not less than two millimeters (for making an eye);
sintepon;
the fifth number hook.

Conditional reductions in the manufacturing processcrochet products: VP cut from "air loops", RLS reduction from "sticks without a crochet", CCP short for "stitches with crochet". Knitting process We knit the back: from blue yarn Richard Simon, brand "Angelina" make a chain of four EPs and connect them to the ring using the appropriate column. Row one: create one EP for the lift. Then twelve CLOs through the resulting circle. We end the series with the join column. A number of the second: we make three EP lifts, after this we make twenty-four SSNs, tied in the COS of the previous series. We finish the series with a connecting post. Third series: we make three EPs for lifting, followed by a repeating pattern: one CLS, tied through the CLS in the last row from the hook. After this, we create two CLOs in the second from the hook row of a column with a crochet. Repeat these combinations until the end of the series. We finish this series with a connecting post. Fourth series: we make three EPs for lifting, then a repeating pattern follows: two CLS, tied through two CLSs in the series preceding the hook. Then we create two CLOs in the next CLS in the previous row from the hook. We ensure that this combination is repeated until the end of the series. Complete this row with the appropriate column. Row five: create three EPs to provide lifting, followed by a repeating pattern: three CLS, tied through three CLOs in the series preceding the hook. Then we make two CLOs in the subsequent SSN in the series preceding the hook. Repeat this combination until the end of the row. To finish this row is necessary the appropriate column. Seventh row: create three EPs to provide the lift, then a repeating pattern follows: four CLOs, tied through four CLOs in the preceding row from the hook. After that, we make two STS in the previous one from the hook row. Repeat this combination until the end of the row. It is necessary to finish this series with the appropriate column. Seventh row: we knit three EPs to ensure lifting, then follows a repeating pattern: five CLS, tied through five SSNs in the series preceding the hook. Then we make two CLSs in the series of CLS preceded by the hook. Repeat these combinations until the end of the series. Complete this row with a connecting bar. Row eight: we make three air lifting loops. Then we make eighty-five columns with a cake in columns with a crochet of the preceding row. It is necessary to finish this series with the appropriate column. We knit the front part: This part is made in the same way as the back, but with a yarn of gray color "Arina". Manufacturing face (two parts): from the yellow yarns of the yarn of the brand make a chain of four EPs and connect them to the ring with the appropriate column. Next we knit spirally. The first row: one EP to provide the lift, after it eight CCVs through the resulting ring. Second row: sixteen RLS ties in the RLS of the previous series. The third and fourth series: create the RLS, adding in each new row of 3 RLS. The fifth and sixth series: we create twenty-two RLSs through the RLS of the previous row. We make a nose of a rabbit: we make a chain of four EPs in pink yarn and connect it into a ring with the appropriate column. After doing this, we continue to knit spirally. The first row: one VP is made to provide for the ascent, then seven SSNs through the resulting circle. The second and third rows: seven RLS tie in the RLS of the previous series. Create a tongue of a hare: a pink yarn we make a chain of six VI (four VI + one VI for lifting). The first row: create one RLS through the third EP of our chain, counting off the hook. After that, we make one RLS in the subsequent VP of our chain. Then create three RLS in the subsequent VP of the base of our chain, counting from the hook, after which we create three RLSs from the wrong side of the chain. Finishing, we cut the thread. Doing the ears: (two parts) Inside of the ear: yellow yarn we make a chain of twenty-one air loops (twenty air loop loops + one air loop for lifting). The first series: create one RLS through the third EP of our chain, counting off the hook. Then we will make five STS in the next five VPs of the basis of our chain. Then we create two half-columns, after which we knit ten columns with a crochet, two half-columns, seven columns without a crochet from the wrong side of the base of the chain. Finishing, we cut the thread. The outer part of the ear: from the blue yarn Richard Simon, brand "Angelina" make a chain of twenty-three air loops (twenty air loop loops + three air loops for lifting). The first row: we make one column with a crochet through the fifth air loop of our chain, counting off the hook. Then we make five bars with a crochet in the next five air loops of the base of our chain. Then we create two half-columns with a crochet, after which we knit ten posts with two crochets, two half-columns with crochets, seven columns with a crochet from the wrong side of the base of the chain. Finishing, we cut the thread. The details that have turned out, we put together and we tie the blue yarn with one row of columns without crochets. The second ear is done in the same way. Making the upper legs (two products): make a chain of four yarns of yellow yarn and connect it to the ring using the appropriate column. We carry out the work spirally. The first row: one EP to ensure the rise, we bind six RLSs through the resulting circle. The second is the twelfth series: we create twelve RLSs through the RLS of the previous series. Production of the lower paws (two products): from the gray yarn we knit a chain of four EPs, closing them in a ring. We continue to work spirally. The first row: create one EP to ensure the rise, we bind six RLSs through the resulting circle. The second row: we knit twelve RLS through a column without the cusp of the preceding row. We cut the thread at the end with scissors. The third and subsequent series: attach a thread of gray color, then create twelve RLSs through the RLS of the previous series. Cut the thread. Tail manufacturing: from the yellow yarn we make a chain of four air loops, closing them in a ring with the help of a connecting column. Then continue the work in a spiral. 1st row: 1 in. n lifting. 7 tbsp. b / n in the resulting ring. The second and third rows: we knit sixteen columns without a crochet across a column without the cusp of the preceding row. We collect in one piece Mordashka stuffed with sintepon, we do the same with the nose of the toy, which after that we attach it to the face. We attach eyes and mouth. We sew the tail to the back from behind. Paws are also stuffed with sintepon. The back and front parts are folded by the outer sides in the middle, between them we attach ears and paws. The parts are connected, leaving a gap of about five centimeters. We turn it out, fill it with sintepon and sew this gap. The toy-pillow is ready!

Comments

comments

Comments

Related posts: