In any home, where the special refer tointerior, there are paintings or photos within. Not one office does not do without such decor elements. Often these are standard landscapes or something of the kind. Now no one will be surprised at this. And imagine what your photo will look like, transferred to a wooden surface. If it is still topped with varnish, it can last for many years. Such a masterpiece you can easily make by yourself. This master class will teach everyone how to transfer the desired photo to the board. This method can be used to transfer any images, and similar pictures will look great among any interior. To perform this work you will need:
- the image printed on the printer (choose black and white, because the color photo will not look so stylish and original);
- Acrylic lacquer and gel (medium), which can easily be found in any store for creativity;
- The brush and the plate itself, corresponding to the size of the photo.
And the first thing in this paper will be applyinggel on wood (the surface should be smooth, you can preliminary clean it with sandpaper). The layer should not turn out to be thick, but not too thin. In the first case, it will be very difficult to disconnect the paper, and in the second case, the paper will not be glued and the image will not be able to be printed on the wooden surface. Make the acrylic layer even, it should be of medium thickness. Now place the selected photo face to the tree. Here a very important aspect is that the image must be printed laser. Otherwise, you can not even try to do this work. Using a suitable object, level the surface of the image and remove the formed air bubbles. Leave the resulting design for the night, sheshould dry well. Make sure that nobody touches it. Now you need to remove the paper from the wooden surface. Do this by applying a wet sponge - so it will be much easier. Although you can try just to wet the tree and rub the paper with your finger. Repeat this step several times. If you want to achieve the effect of a vintage photo, you can age the image. Rub the edges of the wooden board with sandpaper, so you will not only remove the remnants of the gel, but also grind the tree. When you finish your work, open all the varnish. In order that the resulting picture could be hung on the wall, find in any hardware store staples for pictures. Now the work is ready and you can enjoy the result.