Toys decoration with their hands from plastic bottles / Toys with their hands, patterns, video, MK

Toys decoration with their hands from plastic bottles / Toys with their hands, patterns, video, MK

Scientists claim that plastic, includingbottles from it, does not decompose for centuries, clogging the nature. It is all the more pleasant to give him a second life, to make of the bottles something beautiful and useful. For example, a boat that can be floated along the river. toys from plastic bottles

The ship from the bottle

It will take:

  • the ship itself is a plastic bottle;
  • wooden sticks (you can take Chinese);
  • thread;
  • scissors;
  • colored and white paper;
  • 2 small nails, 1 large, equal to the diameter of the rods;
  • glue.

The order of performance of work

  • In order to make a ship, take an emptya clean plastic bottle and burn with a hot nail three holes along the axis (one near the plug, the second in the middle and the third between the middle and the bottom).

The ship from the bottle

  • In the bottom of the bottle, knock in two small cloves. They can also be pre-heated.

The ship from the bottle-2

  • Insert the masts into the boat and lubricate the holes with glue for sealing.

The ship from the bottle-3

  • Cut out sails of different shapes from white paper, andfrom a red flag. Secure them to the ship by piercing the masts. Flags cut out double, so that, having missed the halves with glue, wrap them with the ends of the masts. If the boat sails ahead, then the flags and sails must also be turned forward, because our ship is sailing and sails downwind.

Ship from bottle-4

  • A sailing ship must be all rope-wrapped. Sailors call them guys. We will wrap our boat with threads starting from the nose and bowsprit (horizontal mast).

The ship from the bottle-5

  • Two cloves hammered into the boat will also serve us for fixing the masts and sails to the guys.

The ship from the bottle-6

  • To ship confidently stayed on the water,you need to make him ballast. To do this, simply unscrew the lid and pour some sand into the boat, and it's good if it's a little damp. The sand will not crumble and our boat will not make overquisition.

Ship from bottle-7Such a boat will never sink. You can put a note inside for unknown friends, and send the ship on a long voyage.

ladybug

I propose to make a cult insect in two versions. The first ladybug will be relatively small. Ladybug with her own hands

  • Take an empty small bottle of shampooor balm. It will be the trunk. Cut out wings from a red bottle (for example, from under ketchup), and circles from a dark beer can. Attach the stapler circles to the wings, and one glue on the lid. The ladybug must have eyes to know where to go. Attach the wings with a screw.
  • The second ladybug will be big. Before you do it, you have to collect a lot of different color plastic bottles. Dig a shallow round fossa. Decide which way your ladybug will crawl and starting from the nose, place a black-and-red pattern out of the bottles. If you can not find enough red tare, you can do it by painting the inside of the transparent bottles with red paint. Such a ladybird can become an adornment of any garden.

    • Ladybug with her hands-2

    Frog

    If a green plastic bottle appears in your garbage, do not rush to throw it away. Just 15 minutes of work and on your table will appear a frog made of plastic bottles.

    • Cut off the neck and cut out four paws. From colored paper, make paws, eyes and a girdle that will designate the mouth. Glue the parts to the plastic.

    Frog

    • The original glass for pencils can bemake from the bottom of the green plastic bottle. Just cut out the paws and face, as shown in the photo, glue the eyes and accessories and draw a smile.

    Frog-2

    • The frog princess can be made from two bottles(green and yellow). Cut the bottom and top from the green container and connect them inside with an adhesive tape. Cut out the hips and, cutting the edge of the bottom and hips, insert them into the slots, fixing it inside with an adhesive tape. In the yellow bottle, cut off the screw part and cut out the crown. Put it on the screw neck (head) of the frog and secure with a lid. Cut out the paws, arrow, tongue and eyes. Glue the parts.

    Frog-3

    • Frog box is obtained from two bottoms,connected by an ordinary fastener "zipper". It is enough to glue your eyes and eyelashes, and immediately it becomes clear that this is a cuckoo. "Lightning", before sewing, attach with glue.

    Frog 4

    Figures for decorating the garden

    doll of plastic bottlesIt is interesting, walking in the garden, to meet there differentfigures from plastic bottles. It is even more interesting to make something beautiful and necessary from waste and to please your loved ones. There is an elephant in plastic bottles in the shade of the plums drinking water from the pond. A bee from plastic bottles can be planted on the gate. Let the entrance guard. If children play in the garden, they will really like to find in the bushes of currant and jasmine different surprises. They do not know yet that a doll of plastic bottles, which you made with your own hands, is waiting for them on the bench. Dare! Turn waste into a fairy tale. doll of plastic bottles

    Comments

    comments

    Related posts:

    Default thumbnailMaster of original cocks from plastic bottles and tires / Toys with their own hands, patterns, video, MK Default thumbnailHow to make an elephant of plastic bottles, rubber bands, tires / Toys with your hands, patterns, video, MK Christmas tree of plastic bottles with their own hands, photo, instruction / Toys with their hands, patterns, video, MK Crafts from plastic bottles with their own hands, how to make flowers from plastic bottles, cornflowers from plastic bottles, roses from bottles with their own hands. How to make a gnome for a garden of bottles or gypsum. Master Class. Video / Toys with own hands, patterns, video, MK