Unusual interior items with their own hands, a table from an old tire, tips and advice on how to make it.
Old, spoiled tires most oftenuse in the decoration of flower beds of personal plots. But this is far from the last solution to the application of these items. And today's master class is the true proof of that. It is dedicated to making a table from an old tire made in eco-style. Using the tips and recommendations presented below, you can easily make an unusual table yourself. Out of use tires are not endowed with the most aesthetic appearance. Due to this, we must completely hide it behind the natural surface in the form of a bundle or twine. The final result will depend directly on the thickness of the selected rope. Than it will be thinner, the more difficult and laborious will be the work, but the result you will be satisfied. Your table will come out more elegant and unusual. The process of making a table from an old tire To make such a table you need an old unnecessary tire, a couple of round sheets of plywood (their diameter should be slightly less than the bus itself), a suitable rope, and wheels. Of the additional tools should be prepared glue gun, screws, drill, special coating in the form of a special lacquer or wax. First you need to fix the plywood sheets on the tire. This can be done using a drill, self-tapping screws, it is possible to use a screwdriver or a superglue. By the way, you can make a table with an opening lid, in this case, the lid will be attached to the hinges, you can perform it with handles from the same rope. Now proceed to decorating the table. You should start from the center of the table. The glue needs to be put on the middle of the table and fasten the rope in the form of a small circle. Continue to glue the table with a rope in a circle, heading from the center to its edges. At this stage of work, the most convenient option will be the use of a glue gun, rather than glue from a tube. Use glue as often as possible, so that in the future the rope held very tight and did not fall off. When the top of the table is fully decorated, turn it upside down and continue the work, pasting the sides. The bottom of the table can not be pasted. If desired, screw the wheels or feet to it. When the table is completely ready, open itthe finish coat. And now our original table of tires in ekostile is fully ready for use for its intended purpose. The owner of such an interesting design solution can be everyone, using an old tire, rope and their skills.