Broken material, its use in the manufacture of handicrafts and useful items, crafts from plastic bottles, crafts made of tin cans, handmade crafts.
Waste material provides us with a variety ofopportunities for making crafts that can become a worthy decoration of any home. Items that have gone out of use are very often used to create useful things that can make our lives easier. And the biggest advantage of using waste material is the fact that you don’t need to go to the store and spend money on materials to create new things and crafts. Everything you need is already at hand. All that’s left is to familiarize yourself with the ideas for using old things to create new ones, which are presented in this article
What can I do from an old phone?
At the moment old rotary phonesare very rare. You can see them either among older people or at some companies that do not want to spoil their employees with technological innovations. To make a call from such a device, you need to perform a kind of "ritual", which cannot be compared with new push-button phones.
Time and new technologies have replaced disk drives.devices and left them in the distant past. But the designers were not satisfied with this decision and gave such telephones a second life by installing a clock mechanism inside. Such an old and reliable telephone is perfect for making original watches. Vintage watches made from Soviet phones can perfectly convey the spirit of the past. In this version of the craft, the clock mechanism is built right into the disk. The numbers on the phone, of course, do not correspond to the actual time, but it is quite easy to understand what time it is.
The second life for cans
Leftover tin cans can be useda wonderful source material used to make various items. Some of them may be purely decorative, while others can become useful items for your home or garden. Beer Can Lamp It would seem that a beer can is a rather nondescript and rough-looking item. However, by slightly working on its appearance, you can get a very beautiful openwork lampshade.
To make a similar item, cut off the toppart of the can, using scissors or a knife. Next, you need to draw a diagram of the future pattern and make holes on it, using nails of different diameters, a screwdriver or another similar object that can make a curly hole. This work should be done very carefully so that the can does not get crushed during the work. To avoid deformation, you can tightly fill it with some material, for example, paper. If desired, paint the product both inside and outside. Now fix the lampshade on the socket with a light bulb and your unusual lamp from a beer can is ready. Tin can as a candlestick Quite often, tin cans are used to create unusual candlesticks. It is quite easy to make such an item with your own hands. You need to wash the can and hammer a pattern on it, using a hammer and nails of different diameters. Use your imagination and the examples below to create patterns of incredible beauty.
Lampshade for a table lamp The next version of the product from beer cans involves using only the tongues. The can itself can serve as a leg for the future lamp.
To make a similar canvas from tonguestin cans, each of them needs to be cut at the top and intertwined. In the end, all the cuts need to be bent with pliers. You can also use wire instead. Shelves and organizers from tin cans Tin cans can be used for the most original storage solutions for many things. For example, you can attach them to the wall in the hallway and store hats, scarves, gloves in them. Additionally, you can hang outerwear on them. And how this idea can be applied to your interior, the photos provided will tell you.
The easiest way is to useUnneeded tin cans as a stand for writing or kitchen utensils. Such a useful thing will not take much time to make. It is enough to wash it well, clean the sharp edges, it is desirable to decorate them: paint them with acrylic paints, glue them with fabric or colored paper, decorate with ribbons, appliques, beads, etc.
Try experimenting a little.For example, a set of tin cans can be placed horizontally instead of vertically. You will get an unconventional organizer that looks like a pyramid.
What can you do with an old sweater
You can make something from an old sweaterquite a lot of useful things. Most of them are quite easy to do. Such ideas are useful for both women and men. Take advantage of the tips and do not let your favorite sweater go to waste. Bright and cheerful pillows This transformation of a sweater is very easy to do, and such an accessory will never be superfluous. In addition, knitted textures in the interior are very relevant at the moment.
Turn the sweater inside out andPlace the pillow as close to the side as possible. This will allow you to make one less seam. Now you need to outline the pillow, leaving about 2 cm for seam allowances, and cut off the excess. Sew the two sides together, you can do this by hand or use a sewing machine. Be careful, use all the loops so that the knitted parts do not “run”. Turn the pillowcase to the front side and put it on the pillow. You only have to sew up the fourth side. If you want the pillowcase to be removable, process the edges of the fourth side and sew on buttons. If desired, you can decorate the pillowcase with appliques, fabric flowers, etc. Warm and cozy blanket What could be warmer and more pleasant than your favorite winter sweater. However, a blanket made from old sweaters can be even better. Feel free to use all your accumulated sweaters and jumpers. Using the patchwork technique, you can create such original home blankets.
New Mittens from an Old Sweater You can make new mittens in just a few minutes using an old sweater and the most common tools at hand.
Turn the sweater inside out,Place it in front of you on a flat surface. Place your palm closer to one of the sides and trace around it, giving it the shape of a mitten. Add about 1 cm for seam allowances. Pin the two sides of the sweater together so that the fabric does not move and sew the mitten along the outline. After that, cut out the product and turn it right side out. The same thing needs to be repeated on the opposite side for the second mitten.
Decorate the finished product with buttons and threads.at your discretion. Now the mittens are ready to give you warmth and comfort. Warm hat from a sweater with your own hands Refresh your old sweater and wash it. Next, choose the part from which you will sew the product. The front or back side is best, depending on the appearance. Count on the fact that the elastic band, which is located at the bottom of the sweater, will serve as the bottom of the future hat. Taking into account all the listed nuances, cut out a rectangle corresponding to the size of the head. Choose the length at your discretion.
Sew the hat from the inside. You can do this by hand or use a sewing machine. You should get a kind of tube.
Finish the free edge of the hat in a way that suits you.way, pull it off. Now think about how you will decorate the resulting headdress. In this master class, the hat is decorated with natural fur from an old jacket.
Mittens and leg warmers To get such stylishgarments, just cut off the sleeves, fold them over and sew the cuts to prevent creases. You can wear them under or over clothing and shoes.
Unusual hanger from an old chair
Probably many people are familiar with thata situation when, instead of placing all the things in the closet on a hanger, they remain hanging on the backs of chairs. This is what inspired designers and craftsmen to create very unusual hangers from old and unnecessary chairs. Such hangers are a clear example of how people see the use of old unnecessary objects for their own benefit.
The idea belongs to an Italian designerAntonello Fuse. He has developed a series of characteristic and unique hangers made from old chairs. Anyone can create an original set of hangers using wooden, plastic, modern or vintage chairs. The result is quite impressive.
Tennis ball as a non-standard holder
This cute face will be happy tohold your keys, pen, towel, etc. If the little person is not busy with objects, he will be happy to give you a bright smile throughout the day. You can easily make such a holder with your own hands, using only a tennis ball.
To make a wall holder like this,just make a cut in the center of the ball or a little lower. Use a stationery knife for this. To make the ball look more like a funny face, make eyes using eyelets, buttons or beads, you can just draw them. Such a holder will be attached to the wall with suction cups or screws. This funny object can be used in absolutely any room: in the hallway, hang keys on it, in the bathroom or kitchen, you can easily hang a towel on it, and in the children's room, such a character, in addition to its main function, will delight little children with its bright shapes.
Beautiful patterned lamps from an old teapot with your own hands
For quite some time now metal coffee pots andkettles have been replaced by new electric kettles and coffee machines. Often, convenience and speed of making a drink take precedence over outdated vintage items. That is why most often old kitchen utensils end up in a landfill or at scrap metal collection points. However, today we will go the other way and try to remake an unnecessary metal kettle into a beautiful and unusual lamp. For this work, in addition to an old kettle and a working socket with a light bulb, you will need a special tool for cutting metal or ordinary nails and a hammer.
First of all, thoroughly clean the kettle from everythingdirt and scale. Use special cleaning agents, scale can be removed using citric acid. You need to decide in advance which method you will use to make holes. It will be very good if you have a special metal cutter, thanks to which you can make all kinds of round holes of different diameters. If you do not have one, various round holes can be made using a drill, but first you need to apply dots and lines to the surface of the kettle that make up the pattern. Additionally, work with the bottom of the kettle. Make a hole there so that you can insert a socket with a lamp. If you plan to make a ceiling lamp, then the bottom can be completely cut out. In this case, the socket will be attached to the top, under the lid. Such an unusual lamp can become an interior decoration made in the style of country, industrial or Provence.
Curtain made of plastic bottles
We have long been accustomed to drinking water fromplastic bottles. But what if you find a worthy use for these same bottles in your home. And there are quite a few options. But in this article we will talk about a very original item - a curtain made of plastic bottles. This unusual piece of furniture resembles large airy flowers floating in the air. To make such a curtain, you will need a lot of plastic bottles. Their number and volume depend on the size of the canvas that you intend to make with your own hands. Of the auxiliary tools and materials, you will need a knife, scissors, fishing line, and sand, which must be placed in a metal cup or frying pan. Now start making flowers from plastic bottles, which will serve as the basis for the curtain. Cut off the bottom, but you should not do this in a straight line, but repeating the outlines of the flower. After that, you need to dip all the flowers in the heated sand one by one - you need to melt the cut edges so that in the future they cannot hurt anyone. The most convenient way to make holes for the fishing line is to use an awl. You can string plastic flowers on the fishing line in two ways: make two holes in each bottom, stringing the flowers like beads, or make holes in a circle to subsequently obtain a solid canvas.
In fact, you can make many useful things from plastic bottles, all you need is diligence and desire.





