What seams are needed to work on the pattern of beads? Description and diagrams for training

To learn how to work on drawings in the stylebead embroidery, it is necessary to master the basics of working with beads in general. This point is especially important when constructing a beautiful and unique design. Therefore, let's start learning the basics!

What seams are needed to work on the pattern of beads? Description and diagrams for training

First of all, you need to take the fabric wherethe pattern or structure of your drawing will be applied and stretched onto some device, like a tablet (a wooden frame will do). We will secure it with buttons. You can also use a hoop. The canvas can also be extended by basting for additional strips of fabric. It is best to do the embroidery on a table with ordinary white fabric. This is necessary so as not to lose the beads. In addition, organize the lighting. It is important that you can see the light composition immediately, during the work. The nylon composition of the product will be selected as the thread for embroidery. Light gray or beige thread colors are ideal for light fabric. Simply put, you need to select a shade to match the tone for embroidery. When working with beads, needles of sizes 10 and 12 are most often used. For the set, you can also use a needle 11 to get a universal version of the product for work. First, let's master the monastery stitchIt is very reminiscent of a popular embroidery variant.using a cross. The stitches for this product are performed only in the diagonal structure, and for each stitch you need to use one bead. For the back side of the product, we get a version of vertical stitches. Let's try to secure the thread with a needle, and then - we will bring it to the side of view (front) and string another bead of the desired color, based on the pattern that is offered to you. The next row occurs when the needle is carried out along the back side in a vertical position, up or down, and after - the needle is brought out to the visible side for the corner of the cell (upper). Then, we string the beads and continue embroidering according to a similar pattern row, but using the opposite direction. After we move on to the offset row, it is necessary to carry the needle along the back side in the desired grid for the diagonal. Then, bring the needle out in the upper corner. We will use a running stitchFor this we will need to use onestitch in the ratio of one bead. We bring the needle out from the wrong side between the second and first bead symbols, then string the first bead and insert the needle in front of the first bead symbol. Next, we bring the needle out using the wrong side, using the third and second row of beads, then string the next bead and insert the needle between the second and first symbols. We bring the needle out using the wrong side between the third and fourth symbols, then string another bead and insert the needle between the third, second bead symbols. The work must be continued in a similar version of the pattern on the fabric. We may also need a stem stitch.To do this, we will secure the thread and string the beads.Then, we insert the needle into our product and bring the needle out behind the bead, strung, and then again pass through the stitched bead. Then, we string the next bead and insert the needle into the fabric for the new bead and also bring it out between the penultimate and last bead option. We thread the needle with the help of the stitched bead and string another one with the help of the thread. With this method of sewing, the embroidery will be brought out tightly. Seam "Arches"This option is suitable for products where there is nowe need a tight fit of our beads, also, the embroidery should not be rigid. Each stitch for the front side must be strung with several beads, which are attached with fabrics of one of them, which are at the intersection of the stitch. The sewing method in this case turns out to be very rigid. Circular embroidery optionThere is also a circular embroidery option, whichuses the spiral method with increasing circle diameter until the end of the picture. Next, using semi-bent rows, we fill the necessary space for the future product with beads. You can also use the line and stem stitch options. We use the semi-bent rows with the help of the "Arch" stitch, on two beads.

Comments

comments

Related posts:

How to weave an alstroemeria flower (“Peruvian lily”) from beads, diagrams, description and photo of the work How to make a tree of beads with your own hands? Schemes and a master class for work Crochet shell pattern and pattern – description of a pattern for sewing clothes, patterns for work Lessons of weaving from beads by the method of hand weaving, the scheme of work with a canvas, the description of various nuances of weaving How to decoupage bottles with rice paper, what materials are needed, we will tell you in this article