Everyone knows that Goldfish performsdesire. So why this fairy-tale heroine is not put in every yard, so that all desires of adults and small inhabitants of the house will be executed soon. This craft can fit in any yard, for its construction requires a small area - about one square meter. To create a goldfish yourself, you will need:
The design is made in two stages: First, a high foundation is created, and then it is necessary to start cutting out details of the Goldfish and to assemble them. First, clean the place on the flower bed or lawn under the construction of tires. The prepared area must be no less than the circumference of the wheel. In the center of the selected area, place the first tire horizontally. Then, inside the circle, beat 2-3 pins from the metal pipe or the corner. The height of the metal frame should be approximately equal to the height of the three folded tires. Metal pipes will fix the entire composition in place and will not allow it to be moved to another place, or dumped. In the first tire, fill in the sand or pour in the solution, but not to the top, but slightly more than half the height of the circle. If you use sand, be sure to pour water into it so that it sucks well. On top of the first tire is put on the second tire, which is fastened to the lower base by bolts. Without fastening, one tire can move over the other, which will lead to a breakdown of the entire structure. In the second rubber circle, also pour sand, which should be moistened, or pour the solution. Then put on the third tire, which is fixed along the edge of the circle with the lower tire. In the third part of the base, the sand does not fall asleep, it will be necessary to fill the solution with only one second volume, since then the constructed construction in the form of the Goldfish will be fixed by the cement mortar to the substrate. At the second stage, you should start creating the body of the Golden Fish, which is based on an integral old tire, which is fixed vertically to the center of the base and bolted in places of contact with bolts. Then fill the third tire of the base with a solution so that it fixes the body of the fish. From the second tire, you need to cut out the flat fins. Their model has the form of an elongated oval, on the one hand they are cut serrated. When the solution cools, screw the fins to the body of the fairy-tale character and to the circle of the base. The upper part of the body of the fish is decorated with a large carvedfin, it is also created from the second tire. To fix the fin on the head of the fish, you need to make a slot of the appropriate size, insert the part and fix it with a metal corner in 2-3 places. For the tail of a goldfish, less thanhalf of the circumference of the tire, it must be cut in a straight line. The tail is fastened with bolts and tightened tightly by gangs with large substrates. This is the most important detail, since many children will want to sit on the tail, hang on it, etc., so to fix it, approach as closely as possible. Color all the details in the correspondingcolors, the golden color should prevail as much as possible, red stripes give a truly fabulous appearance, and they are separated by white strokes. The pedestal base should be bright, colorful. You can draw large dots on the lower tires by the type of stones, or draw developing algae in green. A beautiful composition in the form of a Golden Fish will decorate your yard for a long time and will certainly fulfill all your cherished desires.