Making pendants from disks is fun and easy. Their color resembles the waves of ocean waves on a sunny day. Best for this task is suitable for an ordinary rainbow CD. Do not take color - they have a habit of breaking during processing. How to make a pendant from a molten disc? Step-by-step instruction STEP 1: Small fireworks Find a useless CD and put it in the microwave for only five seconds. In the microwave, the disc crackles and sparkles. It's very beautiful, it looks like a salute. But do not overlook it so as not to spoil the material. Take it out in five seconds and decide whether to continue. If the cracks are not enough to ensure that youhave conceived - repeat the five-second fire show. STEP 2: Bubbles Take a baking tray and put aluminum foil on it. Then place the CD on the foil and send it to the oven, heated to a temperature of 400 degrees. After three minutes, check how it is there. Since both ovens and disks come across different, you need to check often. The task is considered to be completed when you see bubbles on the surface of the disk that suit you. The thing is that you need to keep the flat form of the compact disc, and not to melt it completely. ATTENTION: Throughout the apartment there will be a terrible smell of burning plastic! To get rid of it, pour some vanilla onto the foil and after removing the disc, leave the vanilla in the oven until it cools. The whole house will be filled with a pleasant smell of homemade cakes. Who knows, maybe this will inspire you also for bakery masterpieces. STEP 3: Cut out the pendants Without waiting for the disk to cool completely (so it will be easier to cut it), cut out the pendants of any shape with sharp scissors. The disk should be warm, but not hot, so that you are not burned. STEP 4: Drilling a hole Drill a hole with a drill if you have one. Pre-coat the product with a colorless nail polish to avoid cracks. If there is no drill available, it's okay. You probably know that a plastic needle can be pierced with a hot needle. While holding the needle with pliers (or something like that), heat it in the flame of the candle - and make a hole in the pendant. STEP 5: Final touch After you have made a hole, insert a small jewelery ring into it - and you can hang it on a chain or a string. It looks beautiful in combination with metal figures. You can also make earrings in this way and much more. Share ideas in the comments!