From the chair men made a stool, it turned outnot very difficult. Well, I decided to update it, giving it some freshness with the help of a few napkins. Materials that are needed for decoupage dacha furniture - stools - object for decoupage - stool - sandpaper - brushes flat - white paint - napkins paper - file - water - glue PVA universal - lacquer on acrylate basis - protective decorative paint on wood "penetrex "The course of work - we proceed to the decor of the stool So, from the old chair, removing the back, and nailing the seat, made a stool. And he stood at the cottage gray and lonely. Sandpaper stubbed the surface of the seat of the stool. For better adhesion of the outer layer of paint and the surface of the stool smeared with glue PVA, allowed to dry out. I primed a stool with white acrylic paint. After the surface has dried, once again dyed. Dryed, then sanded. At the napkin separated the two lower layers, and the top layer with ornament laid out on the file, face down. Dampened with water and wrinkled. Moved the file with a napkin to the surface of the stool, smoothed it so that air was removed from the napkins, then took the file out. I stuck it on PVA, dried it. Docked the rest of the fragments and left them to dry for a while. The lower part of the stool, i.e. The feet are sanded. The varnish can not be completely removed, since it is applied in production conditions, but it is possible to level the surface of the legs, removing the unstable, old layers of varnish. Penetrexom covered her legs. It's a light tone, but in front of me there was no task to repaint, but only fill the exposed, whitish areas of the legs. She covered the surface of the stool with acrylic lacquer. When the varnish has dried, the procedure is repeated. The country stool is ready.