Cozy do-it-yourself fixtures
Content
Cozy do-it-yourself fixtures
Creating the interior of a house or apartment is necessaryuse not only fashionable modern objects, but also elements made by yourself. It is these things that make the room more comfortable, give it personality and become the highlight of the entire interior. Perhaps, one of such gizmos can be an original lamp made by hand from improvised materials. In order for the lamp to look beautiful, special attention should be paid to the selection of the necessary materials and the accurate execution of all stages of work. But no matter what improvised materials are used, safety should come first. Therefore, it is better to use a high-quality ceramic cartridge and energy-saving bulbs in work. In addition to the fact that such light bulbs help rational use of electricity, they are still practically not heated. The number of bullets and bulbs can be limited only by the imagination of the master.
DIY thread lamp
The easiest way to make a lampis a model of thread. For work you will need: • Balloon; • Threads; • Glue. First of all, it is necessary to inflate the balloon to a suitable size. Then moisten the spool of prepared threads with PVA glue and wrap the ball in several layers at random. On top of the wound layer of thread should again apply a little glue. The workpiece must be left to dry completely. When the threads dry out and can keep their shape well, the ball must be blown off and carefully removed through the hole between the threads. Further, holes are made in the workpiece from below and from above. One for securing the cartridge and base, the other for good lighting of the room. You can fix the resulting lamp to the lampshade to the frame using tape or glue. DIY thread lamp
DIY tulle lamp
Handy material for making cozyfixture can also become a tulle. Such a lamp will look especially harmoniously in the interior of a romantic bedroom. For work, it is best to use coarse enough tulle. From a piece of fabric, it is necessary to cut several blanks of a round shape. The diameter of each subsequent workpiece should be 15 cm larger than the diameter of the previous one. So, the largest circle should be 160-170cm in diameter. In the center of each blank you need to cut a circle with a diameter of 20cm. Then the hole of each workpiece at the edge is collected on a tape. The result should be a lampshade of a lamp resembling a lush flower. DIY tulle lamp
Do-it-yourself lamp made of plastic glasses
It’s quite interesting and originallamp made of disposable plastic glasses. The lampshade of such a lamp is formed due to the original connection of glasses. Mounting is carried out using a trailer. Thus, you can get a lampshade for a lamp of any geometric shape. To fix such a lamp on the ceiling you will need a fishing line, which is mounted on the edges of the resulting lamp. The fishing line is attached to a hook or a special mount under the ceiling, so that the lamp is above the lampshade. Disposable plastic lamp
Disposable plastic spoon lamp
If as a material to useplastic disposable spoons, you get a very interesting design, in shape resembling a bump. To make such a lamp, you need the spoons themselves, plastic handles must be cut off. As a basis, you can use an empty plastic barrel from under the water. Spoons are attached to the base from the bottom up in a chaotic manner, simulating the scales of a fir cone. When all the scales are in place, a cartridge with a bulb is placed in the finished cone and the lamp is ready. Disposable plastic spoon lamp
Cozy paper lamp with your own hands
Lamp made of paper - no less thanoriginal and interesting. In this case, you can use absolutely any paper for work. This may be a newspaper, wallpaper, corrugated and colored paper, old photographs or clippings from glossy magazines. The process of making a lamp from paper is quite simple. On a prepared substrate you just need to glue pieces of paper in a chaotic manner. As additional decor elements, you can use beads, rhinestones, satin ribbons, appliques and various stickers. Any lamp shade must be mounted on a frame, which can also be done independently. For the manufacture of such a frame, plastic bottles, wire or thick plastic threads are suitable. Paper lamp Using all the useful tips and advice on the manufacture of the lamp, you can get not only a beautiful and original, but also a functional piece of interior decor. We also recommend viewing:
Do you like the article? Share on social networks!